[PATCH v3 4/9] staging: panel: Use defined value or checking module params state
From: Mariusz Gorski
Date: Thu Nov 27 2014 - 16:39:07 EST
Avoid magic number and use a comparison with a defined value instead
that checks whether module param has been set by the user to some
value at loading time.
Signed-off-by: Mariusz Gorski <marius.gorski@xxxxxxxxx>
Acked-by: Willy Tarreau <w@xxxxxx>
---
drivers/staging/panel/panel.c | 86 +++++++++++++++++++++----------------------
1 file changed, 43 insertions(+), 43 deletions(-)
diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c
index 1b4a211..5288990 100644
--- a/drivers/staging/panel/panel.c
+++ b/drivers/staging/panel/panel.c
@@ -1411,29 +1411,29 @@ static void lcd_init(void)
switch (lcd_type) {
case LCD_TYPE_OLD:
/* parallel mode, 8 bits */
- if (lcd_proto < 0)
+ if (lcd_proto == NOT_SET)
lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset < 0)
+ if (lcd_charset == NOT_SET)
lcd_charset = LCD_CHARSET_NORMAL;
if (lcd_e_pin == PIN_NOT_SET)
lcd_e_pin = PIN_STROBE;
if (lcd_rs_pin == PIN_NOT_SET)
lcd_rs_pin = PIN_AUTOLF;
- if (lcd_width < 0)
+ if (lcd_width == NOT_SET)
lcd_width = 40;
- if (lcd_bwidth < 0)
+ if (lcd_bwidth == NOT_SET)
lcd_bwidth = 40;
- if (lcd_hwidth < 0)
+ if (lcd_hwidth == NOT_SET)
lcd_hwidth = 64;
- if (lcd_height < 0)
+ if (lcd_height == NOT_SET)
lcd_height = 2;
break;
case LCD_TYPE_KS0074:
/* serial mode, ks0074 */
- if (lcd_proto < 0)
+ if (lcd_proto == NOT_SET)
lcd_proto = LCD_PROTO_SERIAL;
- if (lcd_charset < 0)
+ if (lcd_charset == NOT_SET)
lcd_charset = LCD_CHARSET_KS0074;
if (lcd_bl_pin == PIN_NOT_SET)
lcd_bl_pin = PIN_AUTOLF;
@@ -1442,20 +1442,20 @@ static void lcd_init(void)
if (lcd_da_pin == PIN_NOT_SET)
lcd_da_pin = PIN_D0;
- if (lcd_width < 0)
+ if (lcd_width == NOT_SET)
lcd_width = 16;
- if (lcd_bwidth < 0)
+ if (lcd_bwidth == NOT_SET)
lcd_bwidth = 40;
- if (lcd_hwidth < 0)
+ if (lcd_hwidth == NOT_SET)
lcd_hwidth = 16;
- if (lcd_height < 0)
+ if (lcd_height == NOT_SET)
lcd_height = 2;
break;
case LCD_TYPE_NEXCOM:
/* parallel mode, 8 bits, generic */
- if (lcd_proto < 0)
+ if (lcd_proto == NOT_SET)
lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset < 0)
+ if (lcd_charset == NOT_SET)
lcd_charset = LCD_CHARSET_NORMAL;
if (lcd_e_pin == PIN_NOT_SET)
lcd_e_pin = PIN_AUTOLF;
@@ -1464,42 +1464,42 @@ static void lcd_init(void)
if (lcd_rw_pin == PIN_NOT_SET)
lcd_rw_pin = PIN_INITP;
- if (lcd_width < 0)
+ if (lcd_width == NOT_SET)
lcd_width = 16;
- if (lcd_bwidth < 0)
+ if (lcd_bwidth == NOT_SET)
lcd_bwidth = 40;
- if (lcd_hwidth < 0)
+ if (lcd_hwidth == NOT_SET)
lcd_hwidth = 64;
- if (lcd_height < 0)
+ if (lcd_height == NOT_SET)
lcd_height = 2;
break;
case LCD_TYPE_CUSTOM:
/* customer-defined */
- if (lcd_proto < 0)
+ if (lcd_proto == NOT_SET)
lcd_proto = DEFAULT_LCD_PROTO;
- if (lcd_charset < 0)
+ if (lcd_charset == NOT_SET)
lcd_charset = DEFAULT_LCD_CHARSET;
/* default geometry will be set later */
break;
case LCD_TYPE_HANTRONIX:
/* parallel mode, 8 bits, hantronix-like */
default:
- if (lcd_proto < 0)
+ if (lcd_proto == NOT_SET)
lcd_proto = LCD_PROTO_PARALLEL;
- if (lcd_charset < 0)
+ if (lcd_charset == NOT_SET)
lcd_charset = LCD_CHARSET_NORMAL;
if (lcd_e_pin == PIN_NOT_SET)
lcd_e_pin = PIN_STROBE;
if (lcd_rs_pin == PIN_NOT_SET)
lcd_rs_pin = PIN_SELECP;
- if (lcd_width < 0)
+ if (lcd_width == NOT_SET)
lcd_width = 16;
- if (lcd_bwidth < 0)
+ if (lcd_bwidth == NOT_SET)
lcd_bwidth = 40;
- if (lcd_hwidth < 0)
+ if (lcd_hwidth == NOT_SET)
lcd_hwidth = 64;
- if (lcd_height < 0)
+ if (lcd_height == NOT_SET)
lcd_height = 2;
break;
}
@@ -1557,7 +1557,7 @@ static void lcd_init(void)
if (lcd_da_pin == PIN_NOT_SET)
lcd_da_pin = PIN_NONE;
- if (lcd_charset < 0)
+ if (lcd_charset == NOT_SET)
lcd_charset = DEFAULT_LCD_CHARSET;
if (lcd_charset == LCD_CHARSET_KS0074)
@@ -2227,58 +2227,58 @@ static struct parport_driver panel_driver = {
static int __init panel_init_module(void)
{
/* for backwards compatibility */
- if (keypad_type < 0)
+ if (keypad_type == NOT_SET)
keypad_type = keypad_enabled;
- if (lcd_type < 0)
+ if (lcd_type == NOT_SET)
lcd_type = lcd_enabled;
/* take care of an eventual profile */
switch (profile) {
case PANEL_PROFILE_CUSTOM:
/* custom profile */
- if (keypad_type < 0)
+ if (keypad_type == NOT_SET)
keypad_type = DEFAULT_KEYPAD_TYPE;
- if (lcd_type < 0)
+ if (lcd_type == NOT_SET)
lcd_type = DEFAULT_LCD_TYPE;
break;
case PANEL_PROFILE_OLD:
/* 8 bits, 2*16, old keypad */
- if (keypad_type < 0)
+ if (keypad_type == NOT_SET)
keypad_type = KEYPAD_TYPE_OLD;
- if (lcd_type < 0)
+ if (lcd_type == NOT_SET)
lcd_type = LCD_TYPE_OLD;
- if (lcd_width < 0)
+ if (lcd_width == NOT_SET)
lcd_width = 16;
- if (lcd_hwidth < 0)
+ if (lcd_hwidth == NOT_SET)
lcd_hwidth = 16;
break;
case PANEL_PROFILE_NEW:
/* serial, 2*16, new keypad */
- if (keypad_type < 0)
+ if (keypad_type == NOT_SET)
keypad_type = KEYPAD_TYPE_NEW;
- if (lcd_type < 0)
+ if (lcd_type == NOT_SET)
lcd_type = LCD_TYPE_KS0074;
break;
case PANEL_PROFILE_HANTRONIX:
/* 8 bits, 2*16 hantronix-like, no keypad */
- if (keypad_type < 0)
+ if (keypad_type == NOT_SET)
keypad_type = KEYPAD_TYPE_NONE;
- if (lcd_type < 0)
+ if (lcd_type == NOT_SET)
lcd_type = LCD_TYPE_HANTRONIX;
break;
case PANEL_PROFILE_NEXCOM:
/* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
- if (keypad_type < 0)
+ if (keypad_type == NOT_SET)
keypad_type = KEYPAD_TYPE_NEXCOM;
- if (lcd_type < 0)
+ if (lcd_type == NOT_SET)
lcd_type = LCD_TYPE_NEXCOM;
break;
case PANEL_PROFILE_LARGE:
/* 8 bits, 2*40, old keypad */
- if (keypad_type < 0)
+ if (keypad_type == NOT_SET)
keypad_type = KEYPAD_TYPE_OLD;
- if (lcd_type < 0)
+ if (lcd_type == NOT_SET)
lcd_type = LCD_TYPE_OLD;
break;
}
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/