Re: [PATCH v13 08/12] drm: bridge/dw_hdmi: add mode_valid support

From: Andy Yan
Date: Fri Nov 28 2014 - 04:47:23 EST


Hi Philipp:

On 2014å11æ27æ 00:23, Philipp Zabel wrote:
Am Mittwoch, den 26.11.2014, 21:33 +0800 schrieb Andy Yan:
some platform may not support all the display mode,
add mode_valid interface check it

also add drm_connector_register which add a debugfs
interface for dump display modes and edid information

Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
---

Changes in v13: None
Changes in v12: None
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None

drivers/gpu/drm/bridge/dw_hdmi.c | 17 +++++++++++++++++
include/drm/bridge/dw_hdmi.h | 2 ++
2 files changed, 19 insertions(+)

diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 5e88c8d..b13e782 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -1406,6 +1406,20 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
return 0;
}
+static enum drm_mode_status
+dw_hdmi_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct dw_hdmi *hdmi = container_of(connector,
+ struct dw_hdmi, connector);
+ enum drm_mode_status mode_status = MODE_OK;
+
+ if (hdmi->plat_data->mode_valid)
+ mode_status = hdmi->plat_data->mode_valid(connector, mode);
+
+ return mode_status;
+}
+
static struct drm_encoder *dw_hdmi_connector_best_encoder(struct drm_connector
*connector)
{
@@ -1430,6 +1444,7 @@ static struct drm_connector_funcs dw_hdmi_connector_funcs = {
static struct drm_connector_helper_funcs dw_hdmi_connector_helper_funcs = {
.get_modes = dw_hdmi_connector_get_modes,
+ .mode_valid = dw_hdmi_connector_mode_valid,
.best_encoder = dw_hdmi_connector_best_encoder,
};
@@ -1631,6 +1646,8 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
dev_set_drvdata(dev, hdmi);
+ drm_connector_register(&hdmi->connector);
+
This is not right, the connector is registered by the imx-drm core in
the drm_driver .load callback.
Sorry, I didn't found imx-drm core has did that before.And I found many
connector drivers register it by itself.
This will be removed in next patch.
regards
Philipp






--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/