Re: [PATCH 00/11] ARM: at91: remove !DT support for at91rm9200

[Alexandre Belloni]

On 28/11/2014 at 09:49:10 +0100, Arnd Bergmann wrote :
> > > Actually, some work was done but we never saw an other version of the
> > > series. Alexander, are you still interested? Else we can take the patch
> > > below.
> > > 
> > > http://lists.infradead.org/pipermail/linux-arm-kernel/2014-April/246679.html
> 
> I see. Yes, the approach is similar, and there are actually multiple
> independent problems:
> 
> - getting the current driver to build with multiplatform (trivial, 5 lines)
> - changing the gpio handling to work with DT (simple, both of us did that)
> - writing the binding (simple)

Yeah, let's focus on those first steps. Takashi was willing to take
patches, even if we were not converting the driver to ASoC.

> - changing the driver to ASoC (not that simple)
> 
> > Well, I tried to get a ac97c driver based on alsa soc framework as suggested 
> > by Takashi. But I failed so far, I could not get my head around those 
> > architecture.
> 
> Let's just start with the trivial first patch, that can probably just be merged
> into 3.19, and then we can build on top of that later if anybody wants to
> get ac97 working again on at91.
> 

Do you want one of us to send that patch to Takashi and the Alsa ML or
will you do it?
You can add my ack.

> > When keeping my DT support on the current driver, the only thing which is open 
> > that the bindings should be modifed that they are like soc-ac97link bindings.
> 
> Makes sense, if that binding works on the at91 hardware. I'm not sure
> whether the pinctrl stuff or the first two gpio lines apply though.
> 
> 	Arnd
> 
> 8<---
> ALSA: atmel: fix building the ac97 driver for at91-multiplatform
> 
> at91 will no longer export the mach/cpu.h and mach/hardware.h header files
> in the future, which would break building the atmel ac97c driver.
> 
> Since the cpu_is_* check is only used to find out whether we are running
> on avr32 or arm/at91, we can hardcode that check in the ARM case.
> 
> Unfortunately the driver is missing other work to be useful again on ARM,
> if anyone wants to actually use it, they need to add a DT binding, and
> the driver should really be converted to use the ASoC framework.
> 
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> Link: http://www.spinics.net/lists/arm-kernel/msg382068.html
> 
> diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c
> index b59427d5a697..4eec216b7f92 100644
> --- a/sound/atmel/ac97c.c
> +++ b/sound/atmel/ac97c.c
> @@ -34,10 +34,10 @@
>  #include <linux/platform_data/dma-dw.h>
>  #include <linux/dma/dw.h>
>  
> +#ifdef CONFIG_AVR32
>  #include <mach/cpu.h>
> -
> -#ifdef CONFIG_ARCH_AT91
> -#include <mach/hardware.h>
> +#else
> +#define cpu_is_at32ap7000() (0)
>  #endif
>  
>  #include "ac97c.h"
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/