Re: [PATCH 1/2] devicetree: add a binding for GPIOs going though a level shifter

[Linus Walleij]

On Mon, Nov 24, 2014 at 3:01 PM, Alban Bedel
<alban.bedel@xxxxxxxxxxxxxxxxx> wrote:

> Signed-off-by: Alban Bedel <alban.bedel@xxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/gpio/gpio-level-shifter.txt       | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-level-shifter.txt
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-level-shifter.txt b/Documentation/devicetree/bindings/gpio/gpio-level-shifter.txt
> new file mode 100644
> index 0000000..e108c43
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-level-shifter.txt
> @@ -0,0 +1,15 @@
> +GPIO level shifter
> +
> +This binding allow supporting GPIOs going though a level shifter.
> +
> +Required properties:
> +- compatible : should be "gpio-level-shifter"
> +- data-gpios : list of the data GPIO phandles
> +- #gpio-cells : should be 2
> +- gpio-controller : marks the device node as a GPIO controller
> +
> +Optional properties:
> +- enable-gpio : phandle of the GPIO that control the level shifter enable pin
> +- direction-gpio : phandle of the GPIO that control the level shifter direction
> +- vcca-supply : phandle of the regulator for side A of the level shifter
> +- vccb-supply : phandle of the regulator for side B of the level shifter

It must be clear which side is facing the parent GPIO controller,
A or B.

It must be clear which one of these two should be used if the level shifter
has ony VCC.

And isn't the proper terminology VCC+VDD?

An example must be provided.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/