Re: [PATCH] gpu: drm: i915: intel_dsi_pll.c: Remove unused function

[Jani Nikula]

On Mon, 08 Dec 2014, Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx> wrote:
> Remove the function dsi_rr_formula() that is not used anywhere.

Please don't.

BR,
Jani.

>
> This was partially found by using a static code analysis program called cppcheck.
>
> Signed-off-by: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/intel_dsi_pll.c |   83 +---------------------------------
>  1 file changed, 1 insertion(+), 82 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c
> index fa7a6ca..20086e8 100644
> --- a/drivers/gpu/drm/i915/intel_dsi_pll.c
> +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c
> @@ -50,88 +50,7 @@ static const u32 lfsr_converts[] = {
>  	71, 35							/* 91 - 92 */
>  };
>  
> -#ifdef DSI_CLK_FROM_RR
> -
> -static u32 dsi_rr_formula(const struct drm_display_mode *mode,
> -			  int pixel_format, int video_mode_format,
> -			  int lane_count, bool eotp)
> -{
> -	u32 bpp;
> -	u32 hactive, vactive, hfp, hsync, hbp, vfp, vsync, vbp;
> -	u32 hsync_bytes, hbp_bytes, hactive_bytes, hfp_bytes;
> -	u32 bytes_per_line, bytes_per_frame;
> -	u32 num_frames;
> -	u32 bytes_per_x_frames, bytes_per_x_frames_x_lanes;
> -	u32 dsi_bit_clock_hz;
> -	u32 dsi_clk;
> -
> -	switch (pixel_format) {
> -	default:
> -	case VID_MODE_FORMAT_RGB888:
> -	case VID_MODE_FORMAT_RGB666_LOOSE:
> -		bpp = 24;
> -		break;
> -	case VID_MODE_FORMAT_RGB666:
> -		bpp = 18;
> -		break;
> -	case VID_MODE_FORMAT_RGB565:
> -		bpp = 16;
> -		break;
> -	}
> -
> -	hactive = mode->hdisplay;
> -	vactive = mode->vdisplay;
> -	hfp = mode->hsync_start - mode->hdisplay;
> -	hsync = mode->hsync_end - mode->hsync_start;
> -	hbp = mode->htotal - mode->hsync_end;
> -
> -	vfp = mode->vsync_start - mode->vdisplay;
> -	vsync = mode->vsync_end - mode->vsync_start;
> -	vbp = mode->vtotal - mode->vsync_end;
> -
> -	hsync_bytes = DIV_ROUND_UP(hsync * bpp, 8);
> -	hbp_bytes = DIV_ROUND_UP(hbp * bpp, 8);
> -	hactive_bytes = DIV_ROUND_UP(hactive * bpp, 8);
> -	hfp_bytes = DIV_ROUND_UP(hfp * bpp, 8);
> -
> -	bytes_per_line = DSI_HSS_PACKET_SIZE + hsync_bytes +
> -		DSI_HSA_PACKET_EXTRA_SIZE + DSI_HSE_PACKET_SIZE +
> -		hbp_bytes + DSI_HBP_PACKET_EXTRA_SIZE +
> -		hactive_bytes + DSI_HACTIVE_PACKET_EXTRA_SIZE +
> -		hfp_bytes + DSI_HFP_PACKET_EXTRA_SIZE;
> -
> -	/*
> -	 * XXX: Need to accurately calculate LP to HS transition timeout and add
> -	 * it to bytes_per_line/bytes_per_frame.
> -	 */
> -
> -	if (eotp && video_mode_format == VIDEO_MODE_BURST)
> -		bytes_per_line += DSI_EOTP_PACKET_SIZE;
> -
> -	bytes_per_frame = vsync * bytes_per_line + vbp * bytes_per_line +
> -		vactive * bytes_per_line + vfp * bytes_per_line;
> -
> -	if (eotp &&
> -	    (video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE ||
> -	     video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS))
> -		bytes_per_frame += DSI_EOTP_PACKET_SIZE;
> -
> -	num_frames = drm_mode_vrefresh(mode);
> -	bytes_per_x_frames = num_frames * bytes_per_frame;
> -
> -	bytes_per_x_frames_x_lanes = bytes_per_x_frames / lane_count;
> -
> -	/* the dsi clock is divided by 2 in the hardware to get dsi ddr clock */
> -	dsi_bit_clock_hz = bytes_per_x_frames_x_lanes * 8;
> -	dsi_clk = dsi_bit_clock_hz / 1000;
> -
> -	if (eotp && video_mode_format == VIDEO_MODE_BURST)
> -		dsi_clk *= 2;
> -
> -	return dsi_clk;
> -}
> -
> -#else
> +#ifndef DSI_CLK_FROM_RR
>  
>  /* Get DSI clock from pixel clock */
>  static u32 dsi_clk_from_pclk(u32 pclk, int pixel_format, int lane_count)
> -- 
> 1.7.10.4
>

-- 
Jani Nikula, Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/