RE: [v2 00/25] Add VT-d Posted-Interrupts support

[Wu, Feng]

Ping...

Thanks,
Feng

> -----Original Message-----
> From: Wu, Feng
> Sent: Wednesday, December 03, 2014 3:39 PM
> To: tglx@xxxxxxxxxxxxx; mingo@xxxxxxxxxx; hpa@xxxxxxxxx; x86@xxxxxxxxxx;
> gleb@xxxxxxxxxx; pbonzini@xxxxxxxxxx; dwmw2@xxxxxxxxxxxxx;
> joro@xxxxxxxxxx; alex.williamson@xxxxxxxxxx; jiang.liu@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx; iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx;
> kvm@xxxxxxxxxxxxxxx; Wu, Feng
> Subject: [v2 00/25] Add VT-d Posted-Interrupts support
> 
> VT-d Posted-Interrupts is an enhancement to CPU side Posted-Interrupt.
> With VT-d Posted-Interrupts enabled, external interrupts from
> direct-assigned devices can be delivered to guests without VMM
> intervention when guest is running in non-root mode.
> 
> You can find the VT-d Posted-Interrtups Spec. in the following URL:
> http://www.intel.com/content/www/us/en/intelligent-systems/intel-technolog
> y/vt-directed-io-spec.html
> 
> v1->v2:
> * Use VFIO framework to enable this feature, the VFIO part of this series is
>   base on Eric's patch "[PATCH v3 0/8] KVM-VFIO IRQ forward control"
> * Rebase this patchset on
> git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git,
>   then revise some irq logic based on the new hierarchy irqdomain patches
> provided
>   by Jiang Liu <jiang.liu@xxxxxxxxxxxxxxx>
> 
> This patch series is made of the following groups:
> 1-6: Some preparation changes in iommu and irq component, this is based on
> the
>      new hierarchy irqdomain logic.
> 7-9, 25: IOMMU changes for VT-d Posted-Interrupts, such as, feature detection,
>           command line parameter.
> 10-16, 21-24: Changes related to KVM itself.
> 17-19: Changes in VFIO component, this part was previously sent out as
> "[RFC PATCH v2 0/2] kvm-vfio: implement the vfio skeleton for VT-d
> Posted-Interrupts"
> 20: x86 irq related changes
> 
> Feng Wu (25):
>   genirq: Introduce irq_set_vcpu_affinity() to target an interrupt to a
>     VCPU
>   iommu: Add new member capability to struct irq_remap_ops
>   iommu, x86: Define new irte structure for VT-d Posted-Interrupts
>   iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
>   x86, irq: Implement irq_set_vcpu_affinity for pci_msi_ir_controller
>   iommu, x86: No need to migrating irq for VT-d Posted-Interrupts
>   iommu, x86: Add cap_pi_support() to detect VT-d PI capability
>   iommu, x86: Add intel_irq_remapping_capability() for Intel
>   iommu, x86: define irq_remapping_cap()
>   KVM: change struct pi_desc for VT-d Posted-Interrupts
>   KVM: Add some helper functions for Posted-Interrupts
>   KVM: Initialize VT-d Posted-Interrupts Descriptor
>   KVM: Define a new interface kvm_find_dest_vcpu() for VT-d PI
>   KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu
>   KVM: Make struct kvm_irq_routing_table accessible
>   KVM: make kvm_set_msi_irq() public
>   KVM: kvm-vfio: User API for VT-d Posted-Interrupts
>   KVM: kvm-vfio: implement the VFIO skeleton for VT-d Posted-Interrupts
>   KVM: x86: kvm-vfio: VT-d posted-interrupts setup
>   x86, irq: Define a global vector for VT-d Posted-Interrupts
>   KVM: Update Posted-Interrupts descriptor during vCPU scheduling
>   KVM: Change NDST field after vCPU scheduling
>   KVM: Add the handler for Wake-up Vector
>   KVM: Suppress posted-interrupt when 'SN' is set
>   iommu/vt-d: Add a command line parameter for VT-d posted-interrupts
> 
>  Documentation/kernel-parameters.txt        |    1 +
>  Documentation/virtual/kvm/devices/vfio.txt |    9 +
>  arch/x86/include/asm/entry_arch.h          |    2 +
>  arch/x86/include/asm/hardirq.h             |    1 +
>  arch/x86/include/asm/hw_irq.h              |    2 +
>  arch/x86/include/asm/irq_remapping.h       |   11 ++
>  arch/x86/include/asm/irq_vectors.h         |    1 +
>  arch/x86/include/asm/kvm_host.h            |   14 ++
>  arch/x86/kernel/apic/msi.c                 |    1 +
>  arch/x86/kernel/entry_64.S                 |    2 +
>  arch/x86/kernel/irq.c                      |   27 +++
>  arch/x86/kernel/irqinit.c                  |    2 +
>  arch/x86/kvm/Makefile                      |    2 +-
>  arch/x86/kvm/kvm_vfio_x86.c                |   68 ++++++++
>  arch/x86/kvm/vmx.c                         |  251
> +++++++++++++++++++++++++++-
>  arch/x86/kvm/x86.c                         |   38 ++++-
>  drivers/iommu/intel_irq_remapping.c        |   64 +++++++
>  drivers/iommu/irq_remapping.c              |   24 +++-
>  drivers/iommu/irq_remapping.h              |    8 +
>  include/linux/dmar.h                       |   32 ++++
>  include/linux/intel-iommu.h                |    1 +
>  include/linux/irq.h                        |    7 +
>  include/linux/kvm_host.h                   |   43 +++++
>  include/uapi/linux/kvm.h                   |   10 +
>  kernel/irq/chip.c                          |   14 ++
>  kernel/irq/manage.c                        |   20 +++
>  virt/kvm/irq_comm.c                        |   43 +++++-
>  virt/kvm/irqchip.c                         |   11 --
>  virt/kvm/kvm_main.c                        |   14 ++
>  virt/kvm/vfio.c                            |  103 ++++++++++++
>  30 files changed, 799 insertions(+), 27 deletions(-)
>  create mode 100644 arch/x86/kvm/kvm_vfio_x86.c

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/