Re: using DMA-API on ARM
From: Arend van Spriel
Date: Mon Dec 08 2014 - 12:01:57 EST
On 12/08/14 17:03, Catalin Marinas wrote:
On Mon, Dec 08, 2014 at 03:01:32PM +0000, Arnd Bergmann wrote:
[ 0.000000] PL310 OF: cache setting yield illegal associativity
[ 0.000000] PL310 OF: -1069781724 calculated, only 8 and 16 legal
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e130001
If the above value is correct, they should make sure bit 22 is set in
AUX_CTRL.
Hante applied the patch and it now says:
[ 0.000000] PL310 OF: cache setting yield illegal associativity
[ 0.000000] PL310 OF: -1069781724 calculated, only 8 and 16 legal
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x4e530001
He started running a test overnight. So will see if it hits the failure
with this L2 cache configuration.
Regards,
Arend
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/