Re: [PATCHv2 2/3] sunxi:drivers:input:ps2 Added sunxi A10/A20 ps2 driver

From: Maxime Ripard
Date: Mon Dec 08 2014 - 17:45:16 EST

Next message: Eric W. Biederman: "Re: [CFT][PATCH 6/7] userns: Add a knob to disable setgroups on a per user namespace basis"
Previous message: Dan Williams: "Re: wl1251: NVS firmware data"
Next in thread: Maxime Ripard: "Re: [PATCHv2 2/3] sunxi:drivers:input:ps2 Added sunxi A10/A20 ps2 driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

On Sun, Dec 07, 2014 at 04:45:18AM +0530, vishnupatekar wrote:
> -added compatible as allwinner,sun4i-a10-ps2 and allwinner,sun7i-a20-ps2.
> - added default n depends on ARCH_SUNXI || COMPILE_TEST
> in Kconfig.
> -handled errors and free resources on errors.
> -used BIT(x), DIV_ROUND_UP macros.
> -corrected style errors.

The changelog should be either in your cover letter or just above the
diffstat, but not in your commitlog.

This should have a real commit log, telling what you're doing, why,
and how.

> Signed-off-by: vishnupatekar <VishnuPatekar0510@xxxxxxxxx>
> ---
> drivers/input/serio/Kconfig | 10 ++
> drivers/input/serio/Makefile | 1 +
> drivers/input/serio/sunxi-ps2.c | 364 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 375 insertions(+)
> create mode 100644 drivers/input/serio/sunxi-ps2.c
>
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index bc2d474..3a7599c 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -281,4 +281,14 @@ config HYPERV_KEYBOARD
> To compile this driver as a module, choose M here: the module will
> be called hyperv_keyboard.
>
> +config SERIO_SUNXI_PS2
> + tristate "Allwinner Sun4i-A10/Sun7i-A20 PS/2 controller"

Allwinner A10 is enough

> + default n

This is the default.

> + depends on ARCH_SUNXI || COMPILE_TEST
> + help
> + Say Y here if you have Sun4i-A10/Sun7i-A20 Allwinner PS/2 ports.

You can just mention Allwinne A10 here, on sun4i, at your convenience.

> +
> + To compile this driver as a module, choose M here: the
> + module will be called sunxi-ps2.
> +
> endif
> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> index 815d874..0fa0f78 100644
> --- a/drivers/input/serio/Makefile
> +++ b/drivers/input/serio/Makefile
> @@ -29,3 +29,4 @@ obj-$(CONFIG_SERIO_ARC_PS2) += arc_ps2.o
> obj-$(CONFIG_SERIO_APBPS2) += apbps2.o
> obj-$(CONFIG_SERIO_OLPC_APSP) += olpc_apsp.o
> obj-$(CONFIG_HYPERV_KEYBOARD) += hyperv-keyboard.o
> +obj-$(CONFIG_SERIO_SUNXI_PS2) += sunxi-ps2.o
> diff --git a/drivers/input/serio/sunxi-ps2.c b/drivers/input/serio/sunxi-ps2.c
> new file mode 100644
> index 0000000..4cd89ae
> --- /dev/null
> +++ b/drivers/input/serio/sunxi-ps2.c

Please call it sun4i-ps2, just in case we have another one coming at
some point.

> @@ -0,0 +1,364 @@
> +/*
> + * Driver for Allwinner A20 PS2 host controller

s/A20/A10/ ?

> + * Author: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>
> + * Aaron.maoye <leafy.myeh@xxxxxxxxxxxxxx>
> + *
> + * Based on 3.0 kernel

Please mention that it is Allwinner's kernel driver you're talking
about.

> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/serio.h>
> +#include <linux/interrupt.h>
> +#include <linux/errno.h>
> +#include <linux/slab.h>
> +#include <linux/list.h>
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +
> +#define DRIVER_NAME "sunxi-ps2"
> +
> +/* register offset definitions */
> +#define PS2_REG_GCTL (0x00) /* PS2 Module Global Control Reg */
> +#define PS2_REG_DATA (0x04) /* PS2 Module Data Reg */
> +#define PS2_REG_LCTL (0x08) /* PS2 Module Line Control Reg */
> +#define PS2_REG_LSTS (0x0C) /* PS2 Module Line Status Reg */
> +#define PS2_REG_FCTL (0x10) /* PS2 Module FIFO Control Reg */
> +#define PS2_REG_FSTS (0x14) /* PS2 Module FIFO Status Reg */
> +#define PS2_REG_CLKDR (0x18) /* PS2 Module Clock Divider Reg*/
> +
> +/* PS2 GLOBAL CONTROL REGISTER PS2_GCTL */
> +#define PS2_GCTL_INTFLAG BIT(4)
> +#define PS2_GCTL_INTEN BIT(3)
> +#define PS2_GCTL_RESET BIT(2)
> +#define PS2_GCTL_MASTER BIT(1)
> +#define PS2_GCTL_BUSEN BIT(0)
> +
> +/* PS2 LINE CONTROL REGISTER */
> +#define PS2_LCTL_NOACK BIT(18)
> +#define PS2_LCTL_TXDTOEN BIT(8)
> +#define PS2_LCTL_STOPERREN BIT(3)
> +#define PS2_LCTL_ACKERREN BIT(2)
> +#define PS2_LCTL_PARERREN BIT(1)
> +#define PS2_LCTL_RXDTOEN BIT(0)
> +
> +/* PS2 LINE STATUS REGISTER */
> +#define PS2_LSTS_TXTDO BIT(8)
> +#define PS2_LSTS_STOPERR BIT(3)
> +#define PS2_LSTS_ACKERR BIT(2)
> +#define PS2_LSTS_PARERR BIT(1)
> +#define PS2_LSTS_RXTDO BIT(0)
> +
> +/* PS2 FIFO CONTROL REGISTER */
> +#define PS2_FCTL_TXRST BIT(17)
> +#define PS2_FCTL_RXRST BIT(16)
> +#define PS2_FCTL_TXUFIEN BIT(10)
> +#define PS2_FCTL_TXOFIEN BIT(9)
> +#define PS2_FCTL_TXRDYIEN BIT(8)
> +#define PS2_FCTL_RXUFIEN BIT(2)
> +#define PS2_FCTL_RXOFIEN BIT(1)
> +#define PS2_FCTL_RXRDYIEN BIT(0)
> +
> +/* PS2 FIFO STATUS REGISTER */
> +#define PS2_FSTS_TXUF BIT(10)
> +#define PS2_FSTS_TXOF BIT(9)
> +#define PS2_FSTS_TXRDY BIT(8)
> +#define PS2_FSTS_RXUF BIT(2)
> +#define PS2_FSTS_RXOF BIT(1)
> +#define PS2_FSTS_RXRDY BIT(0)

Please define the bits right below the register they belong too, not
separated.

> +#define PS2_LINE_ERROR_BIT \
> + (PS2_LSTS_TXTDO|PS2_LSTS_STOPERR|PS2_LSTS_ACKERR| \
> + PS2_LSTS_PARERR|PS2_LSTS_RXTDO)
> +
> +#define PS2_FIFO_ERROR_BIT \
> + (PS2_FSTS_TXUF|PS2_FSTS_TXOF|PS2_FSTS_TXRDY|PS2_FSTS_RXUF| \
> + PS2_FSTS_RXOF|PS2_FSTS_RXRDY)

Spaces around the operators.

> +
> +#define PS2_SAMPLE_CLK (1000000)
> +#define PS2_SCLK (125000)
> +
> +struct sunxips2data {
> + struct serio *serio;
> + struct device *dev;
> +
> + /* IO mapping base */
> + void __iomem *reg_base;
> +
> + /* clock management */
> + struct clk *clk;
> +
> + /* irq */
> + spinlock_t lock;
> + int irq;
> +};
> +
> +/*********************/
> +/* Interrupt handler */
> +/*********************/
> +static irqreturn_t sunxips2_interrupt(int irq, void *dev_id)

s/sunxips2/sun4i_ps2/ please.

> +{
> + struct sunxips2data *drvdata = dev_id;
> + u32 intr_status;
> + u32 fifo_status;
> + unsigned char byte;
> + u32 rval;
> + u32 error = 0;
> +
> + spin_lock(&drvdata->lock);
> +
> + /* Get the PS/2 interrupts and clear them */
> + intr_status = readl(drvdata->reg_base + PS2_REG_LSTS);
> + fifo_status = readl(drvdata->reg_base + PS2_REG_FSTS);
> +
> + /*Check Line Status Register*/
> + if (intr_status & 0x10f) {
> + if (intr_status & PS2_LSTS_STOPERR)
> + dev_info(drvdata->dev, "PS/2 Stop Bit Error!");
> + if (intr_status & PS2_LSTS_ACKERR)
> + dev_info(drvdata->dev, "PS/2 Acknowledge Error!\n");
> + if (intr_status & PS2_LSTS_PARERR)
> + dev_info(drvdata->dev, "PS/2 Parity Error!\n");
> + if (intr_status & PS2_LSTS_TXTDO)
> + dev_info(drvdata->dev, "PS/2 Transmit Data Timeout!\n");
> + if (intr_status & PS2_LSTS_RXTDO)
> + dev_info(drvdata->dev, "PS/2 Receive Data Timeout!\n");
> +
> + /*reset PS/2 controller*/
> + writel(readl(drvdata->reg_base + PS2_REG_GCTL) | PS2_GCTL_RESET,
> + drvdata->reg_base + PS2_REG_GCTL);

It's usually better to have it as two lines: one for the read, one for
the write.

> +
> + rval = PS2_LSTS_TXTDO | PS2_LSTS_STOPERR | PS2_LSTS_ACKERR |
> + PS2_LSTS_PARERR | PS2_LSTS_RXTDO;
> + writel(rval, drvdata->reg_base + PS2_REG_LSTS);
> + error = 1;
> + }
> +
> + /*Check FIFO Status Register*/
> + if (fifo_status & 0x0606) {
> + if (fifo_status & PS2_FSTS_TXUF)
> + dev_info(drvdata->dev, "PS/2 Tx FIFO Underflow!\n");
> + if (fifo_status & PS2_FSTS_TXOF)
> + dev_info(drvdata->dev, "PS/2 Tx FIFO Overflow!\n");
> + if (fifo_status & PS2_FSTS_RXUF)
> + dev_info(drvdata->dev, "PS/2 Rx FIFO Underflow!\n");
> + if (fifo_status & PS2_FSTS_RXOF)
> + dev_info(drvdata->dev, "PS/2 Rx FIFO Overflow!\n");
> + /*reset PS/2 controller*/
> + writel(readl(drvdata->reg_base + PS2_REG_GCTL) | PS2_GCTL_RESET,
> + drvdata->reg_base + PS2_REG_GCTL);

Ditto.

> + rval = PS2_FSTS_TXUF | PS2_FSTS_TXOF | PS2_FSTS_TXRDY |
> + PS2_FSTS_RXUF | PS2_FSTS_RXOF | PS2_FSTS_RXRDY;
> + writel(rval, drvdata->reg_base + PS2_REG_FSTS);
> + error = 1;
> + }
> +
> + rval = (fifo_status >> 16) & 0x3;
> + while (!error && rval--) {
> + byte = readl(drvdata->reg_base + PS2_REG_DATA) & 0xff;
> + /* dev_info(drvdata->dev, "PS/2 Receive %02x\n", byte); */

Remove that line.

> + serio_interrupt(drvdata->serio, byte, 0);
> + }
> +
> + writel(intr_status, drvdata->reg_base + PS2_REG_LSTS);
> + writel(fifo_status, drvdata->reg_base + PS2_REG_FSTS);
> +
> + spin_unlock(&drvdata->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +
> +static int sunxips2_open(struct serio *pserio)
> +{
> + struct sunxips2data *drvdata = pserio->port_data;
> + u32 src_clk = 0;
> + u32 clk_scdf;
> + u32 clk_pcdf;
> + u32 rval;
> +
> + /*Set Line Control And Enable Interrupt*/
> + rval = PS2_LCTL_TXDTOEN | PS2_LCTL_STOPERREN | PS2_LCTL_ACKERREN
> + | PS2_LCTL_PARERREN | PS2_LCTL_RXDTOEN;
> + writel(rval, drvdata->reg_base + PS2_REG_LCTL);
> +
> + /*Reset FIFO*/
> + rval = PS2_FCTL_TXRST|PS2_FCTL_RXRST|PS2_FCTL_TXUFIEN|PS2_FCTL_TXOFIEN
> + |PS2_FCTL_RXUFIEN|PS2_FCTL_RXOFIEN|PS2_FCTL_RXRDYIEN;
> + writel(rval, drvdata->reg_base + PS2_REG_FCTL);
> +
> + src_clk = clk_get_rate(drvdata->clk);
> +
> + if (!src_clk) {
> + dev_info(drvdata->dev, "w_ps2c_set_sclk error, source clock is 0.");
> + return -1;
> + }
> +
> + /*Set Clock Divider Register*/
> + clk_scdf = DIV_ROUND_UP(src_clk, PS2_SAMPLE_CLK) - 1;
> + clk_pcdf = DIV_ROUND_UP(PS2_SAMPLE_CLK, PS2_SCLK) - 1;

So this is actually a rounding down?

Why not just using src_clk / PS2_SAMPLE_CLK directly?

> + rval = (clk_scdf<<8) | clk_pcdf;

Spaces between the operators. Remember, run checkpatch.

> + writel(rval, drvdata->reg_base + PS2_REG_CLKDR);
> +
> + /*Set Global Control Register*/
> + rval = PS2_GCTL_RESET | PS2_GCTL_INTEN | PS2_GCTL_MASTER
> + | PS2_GCTL_BUSEN;
> + writel(rval, drvdata->reg_base + PS2_REG_GCTL);

You seem to be reading/writing from the same registers than in your
interrupt handler, don't you need some locking in here?

> +
> + return 0;
> +}
> +
> +static void sunxips2_close(struct serio *pserio)
> +{
> + struct sunxips2data *drvdata = pserio->port_data;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&drvdata->lock, flags);
> + /* Disable the PS2 interrupts */
> + writel(0, drvdata->reg_base + PS2_REG_GCTL);
> + spin_unlock_irqrestore(&drvdata->lock, flags);
> +}
> +
> +static int sunxips2_write(struct serio *pserio, unsigned char val)
> +{
> + unsigned long expire = jiffies + msecs_to_jiffies(10000);
> + struct sunxips2data *drvdata = (struct sunxips2data *)pserio->port_data;
> +
> + do {
> + if (readl(drvdata->reg_base + PS2_REG_FSTS) & PS2_FSTS_TXRDY) {
> + writel(val, drvdata->reg_base + PS2_REG_DATA);
> + return 0;
> + }
> + } while (time_before(jiffies, expire));
> +
> + return 0;
> +}
> +
> +static int sunxips2_probe(struct platform_device *pdev)
> +{
> + struct resource *res; /* IO mem resources */
> + struct sunxips2data *drvdata;
> + struct serio *serio;
> + struct device *dev = &pdev->dev;
> + unsigned int irq;
> + int error;
> +
> + drvdata = devm_kzalloc(dev, sizeof(struct sunxips2data), GFP_KERNEL);
> + serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
> + if (!drvdata || !serio) {
> + error = -ENOMEM;
> + goto err_free_mem;
> + }
> +
> + spin_lock_init(&drvdata->lock);
> +
> + /* IO */
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + drvdata->reg_base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(drvdata->reg_base)) {
> + dev_err(dev, "failed to map registers\n");
> + error = PTR_ERR(drvdata->reg_base);
> + goto err_free_mem;
> + }
> +
> + drvdata->clk = devm_clk_get(dev, NULL);
> + if (!IS_ERR(drvdata->clk)) {
> + error = clk_prepare_enable(drvdata->clk);
> + if (error < 0) {
> + dev_err(dev, "failed to enable clock %d\n", error);
> + goto err_free_mem;
> + }
> + } else {
> + error = PTR_ERR(drvdata->clk);
> + dev_err(dev, "couldn't get clock %d\n", error);
> + goto err_free_mem;
> + }

That would be better if you had something like

clk_get()
if (IS_ERR())
goto

clk_prepare_enable()
if (IS_ERR())

Especially since you're using that kind of construct in the rest of
your function.

> + serio->id.type = SERIO_8042;
> + serio->write = sunxips2_write;
> + serio->open = sunxips2_open;
> + serio->close = sunxips2_close;
> + serio->port_data = drvdata;
> + serio->dev.parent = dev;
> + strlcpy(serio->name, dev_name(dev), sizeof(serio->name));
> + strlcpy(serio->phys, dev_name(dev), sizeof(serio->phys));
> +
> + /* Get IRQ for the device */
> + irq = platform_get_irq(pdev, 0);
> + if (!irq) {
> + dev_err(dev, "no IRQ found\n");
> + error = -ENXIO;
> + goto error_disable_clk;
> + }
> +
> + drvdata->irq = irq;
> + drvdata->serio = serio;
> + drvdata->dev = dev;
> + error = devm_request_threaded_irq(dev, drvdata->irq,
> + sunxips2_interrupt, NULL, 0, DRIVER_NAME, drvdata);

This really looks like a case for a regular request_irq.

> + if (error) {
> + dev_err(drvdata->dev, "Interrupt alloc failed %d:error:%d\n",
> + drvdata->irq, error);
> + goto error_disable_clk;
> + }
> +
> + serio_register_port(serio);
> + platform_set_drvdata(pdev, drvdata);
> +
> + return 0; /* success */
> +
> +error_disable_clk:
> + clk_disable_unprepare(drvdata->clk);
> +
> +err_free_mem:
> + kfree(serio);
> + return error;
> +}
> +
> +static int sunxips2_remove(struct platform_device *pdev)
> +{
> + struct sunxips2data *drvdata = platform_get_drvdata(pdev);
> +
> + serio_unregister_port(drvdata->serio);
> + disable_irq(drvdata->irq);
> +
> + if (!IS_ERR(drvdata->clk))
> + clk_disable_unprepare(drvdata->clk);

And you can drop that if.

> + kfree(drvdata->serio);
> +
> + return 0;
> +}
> +
> +/* Match table for of_platform binding */
> +static const struct of_device_id sunxips2_of_match[] = {
> + { .compatible = "allwinner,sun7i-a20-ps2", },
> + { .compatible = "allwinner,sun4i-a10-ps2", },

If the two really are compatible, you just need one of them, the A10
one in that case, since that's the earlier SoCs.

> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(of, sunxips2_of_match);
> +
> +/*platform driver structure*/
> +static struct platform_driver sunxips2_of_driver = {
> + .probe = sunxips2_probe,
> + .remove = sunxips2_remove,
> + .driver = {
> + .name = DRIVER_NAME,
> + .of_match_table = sunxips2_of_match,
> + },
> +};
> +module_platform_driver(sunxips2_of_driver);
> +
> +MODULE_AUTHOR("Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>");
> +MODULE_AUTHOR("Aaron.maoye <leafy.myeh@xxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Sunxi PS/2 driver");
> +MODULE_LICENSE("GPL");
> --
> 1.7.9.5
>

It's looking great otherwise.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature

Next message: Eric W. Biederman: "Re: [CFT][PATCH 6/7] userns: Add a knob to disable setgroups on a per user namespace basis"
Previous message: Dan Williams: "Re: wl1251: NVS firmware data"
Next in thread: Maxime Ripard: "Re: [PATCHv2 2/3] sunxi:drivers:input:ps2 Added sunxi A10/A20 ps2 driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]