[PATCH 2/3] gpio: dln2: use bus_sync_unlock instead of scheduling work
From: Octavian Purdila
Date: Thu Dec 11 2014 - 08:05:04 EST
Use the irq_chip bus_sync_unlock method to update hardware registers
instead of scheduling work from the mask/unmask methods. This simplifies
a bit the driver and make it more uniform with the other GPIO IRQ
drivers.
Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
---
drivers/gpio/gpio-dln2.c | 92 +++++++++++++++++++++++++++---------------------
1 file changed, 51 insertions(+), 41 deletions(-)
diff --git a/drivers/gpio/gpio-dln2.c b/drivers/gpio/gpio-dln2.c
index 28a62c4..2fdb138 100644
--- a/drivers/gpio/gpio-dln2.c
+++ b/drivers/gpio/gpio-dln2.c
@@ -47,13 +47,6 @@
#define DLN2_GPIO_MAX_PINS 32
-struct dln2_irq_work {
- struct work_struct work;
- struct dln2_gpio *dln2;
- int pin;
- int type;
-};
-
struct dln2_gpio {
struct platform_device *pdev;
struct gpio_chip gpio;
@@ -66,7 +59,10 @@ struct dln2_gpio {
/* active IRQs - not synced to hardware */
DECLARE_BITMAP(unmasked_irqs, DLN2_GPIO_MAX_PINS);
- struct dln2_irq_work *irq_work;
+ /* active IRQS - synced to hardware */
+ DECLARE_BITMAP(enabled_irqs, DLN2_GPIO_MAX_PINS);
+ int irq_type[DLN2_GPIO_MAX_PINS];
+ struct mutex irq_lock;
};
struct dln2_gpio_pin {
@@ -296,18 +292,6 @@ static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin,
&req, sizeof(req));
}
-static void dln2_irq_work(struct work_struct *w)
-{
- struct dln2_irq_work *iw = container_of(w, struct dln2_irq_work, work);
- struct dln2_gpio *dln2 = iw->dln2;
- u8 type = iw->type & DLN2_GPIO_EVENT_MASK;
-
- if (test_bit(iw->pin, dln2->unmasked_irqs))
- dln2_gpio_set_event_cfg(dln2, iw->pin, type, 0);
- else
- dln2_gpio_set_event_cfg(dln2, iw->pin, DLN2_GPIO_EVENT_NONE, 0);
-}
-
static void dln2_irq_unmask(struct irq_data *irqd)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
@@ -315,7 +299,6 @@ static void dln2_irq_unmask(struct irq_data *irqd)
int pin = irqd_to_hwirq(irqd);
set_bit(pin, dln2->unmasked_irqs);
- schedule_work(&dln2->irq_work[pin].work);
}
static void dln2_irq_mask(struct irq_data *irqd)
@@ -325,7 +308,6 @@ static void dln2_irq_mask(struct irq_data *irqd)
int pin = irqd_to_hwirq(irqd);
clear_bit(pin, dln2->unmasked_irqs);
- schedule_work(&dln2->irq_work[pin].work);
}
static int dln2_irq_set_type(struct irq_data *irqd, unsigned type)
@@ -336,19 +318,19 @@ static int dln2_irq_set_type(struct irq_data *irqd, unsigned type)
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
- dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_HIGH;
+ dln2->irq_type[pin] = DLN2_GPIO_EVENT_LVL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
- dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_LOW;
+ dln2->irq_type[pin] = DLN2_GPIO_EVENT_LVL_LOW;
break;
case IRQ_TYPE_EDGE_BOTH:
- dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE;
+ dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE;
break;
case IRQ_TYPE_EDGE_RISING:
- dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_RISING;
+ dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE_RISING;
break;
case IRQ_TYPE_EDGE_FALLING:
- dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_FALLING;
+ dln2->irq_type[pin] = DLN2_GPIO_EVENT_CHANGE_FALLING;
break;
default:
return -EINVAL;
@@ -357,11 +339,50 @@ static int dln2_irq_set_type(struct irq_data *irqd, unsigned type)
return 0;
}
+static void dln2_irq_bus_lock(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+
+ mutex_lock(&dln2->irq_lock);
+}
+
+static void dln2_irq_bus_unlock(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+ int enabled, unmasked;
+ unsigned type;
+ int ret;
+
+ enabled = test_bit(pin, dln2->enabled_irqs);
+ unmasked = test_bit(pin, dln2->unmasked_irqs);
+
+ if (enabled != unmasked) {
+ if (unmasked) {
+ type = dln2->irq_type[pin] & DLN2_GPIO_EVENT_MASK;
+ set_bit(pin, dln2->enabled_irqs);
+ } else {
+ type = DLN2_GPIO_EVENT_NONE;
+ clear_bit(pin, dln2->enabled_irqs);
+ }
+
+ ret = dln2_gpio_set_event_cfg(dln2, pin, type, 0);
+ if (ret)
+ dev_err(dln2->gpio.dev, "failed to set event\n");
+ }
+
+ mutex_unlock(&dln2->irq_lock);
+}
+
static struct irq_chip dln2_gpio_irqchip = {
.name = "dln2-irq",
.irq_mask = dln2_irq_mask,
.irq_unmask = dln2_irq_unmask,
.irq_set_type = dln2_irq_set_type,
+ .irq_bus_lock = dln2_irq_bus_lock,
+ .irq_bus_sync_unlock = dln2_irq_bus_unlock,
};
static void dln2_gpio_event(struct platform_device *pdev, u16 echo,
@@ -393,7 +414,7 @@ static void dln2_gpio_event(struct platform_device *pdev, u16 echo,
return;
}
- switch (dln2->irq_work[pin].type) {
+ switch (dln2->irq_type[pin]) {
case DLN2_GPIO_EVENT_CHANGE_RISING:
if (event->value)
generic_handle_irq(irq);
@@ -412,7 +433,7 @@ static int dln2_gpio_probe(struct platform_device *pdev)
struct dln2_gpio *dln2;
struct device *dev = &pdev->dev;
int pins;
- int i, ret;
+ int ret;
pins = dln2_gpio_get_pin_count(pdev);
if (pins < 0) {
@@ -428,15 +449,7 @@ static int dln2_gpio_probe(struct platform_device *pdev)
if (!dln2)
return -ENOMEM;
- dln2->irq_work = devm_kcalloc(&pdev->dev, pins,
- sizeof(struct dln2_irq_work), GFP_KERNEL);
- if (!dln2->irq_work)
- return -ENOMEM;
- for (i = 0; i < pins; i++) {
- INIT_WORK(&dln2->irq_work[i].work, dln2_irq_work);
- dln2->irq_work[i].pin = i;
- dln2->irq_work[i].dln2 = dln2;
- }
+ mutex_init(&dln2->irq_lock);
dln2->pdev = pdev;
@@ -490,11 +503,8 @@ out:
static int dln2_gpio_remove(struct platform_device *pdev)
{
struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
- int i;
dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV);
- for (i = 0; i < dln2->gpio.ngpio; i++)
- flush_work(&dln2->irq_work[i].work);
gpiochip_remove(&dln2->gpio);
return 0;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/