[PATCH v2] regulator: s2mps11: Fix dw_mmc failure on Gear 2

[Krzysztof Kozlowski]

Invalid buck4 configuration for linear mapping of voltage in S2MPS14
regulators caused boot failure on Gear 2 (dw_mmc-exynos):

[    3.569137] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: (null)
[    3.571716] VFS: Mounted root (ext4 filesystem) readonly on device 179:15.
[    3.629842] mmcblk0: error -110 sending status command, retrying
[    3.630244] mmcblk0: error -110 sending status command, retrying
[    3.636292] mmcblk0: error -110 sending status command, aborting

Buck4 voltage regulator has different minimal voltage value than other
bucks. Commit merging multiple regulator description macros caused to
use linear_min_sel from buck[1235] regulators as value for buck4. This
lead to lower voltage of buck4 than required.

Output of the buck4 is used internally as power source for
LDO{3,4,7,11,19,20,21,23}. On Gear 2 board LDO11 is used as MMC
regulator (V_EMMC_1.8V).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Fixes: 5a867cf28893 ("regulator: s2mps11: Optimize the regulator description macro")
Cc: <stable@xxxxxxxxxxxxxxx>

---
Changes since v1:
1. Extend patch description and trim dmesg log.
2. Justify indentation for carried-over regulator_desc_s2mps14_buck argument.
---
 drivers/regulator/s2mps11.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index c1444c3d84c2..2809ae0d6bcd 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -570,7 +570,7 @@ static struct regulator_ops s2mps14_reg_ops = {
 	.enable_mask	= S2MPS14_ENABLE_MASK		\
 }
 
-#define regulator_desc_s2mps14_buck(num, min, step) {		\
+#define regulator_desc_s2mps14_buck(num, min, step, min_sel) {	\
 	.name		= "BUCK"#num,				\
 	.id		= S2MPS14_BUCK##num,			\
 	.ops		= &s2mps14_reg_ops,			\
@@ -579,7 +579,7 @@ static struct regulator_ops s2mps14_reg_ops = {
 	.min_uV		= min,					\
 	.uV_step	= step,					\
 	.n_voltages	= S2MPS14_BUCK_N_VOLTAGES,		\
-	.linear_min_sel = S2MPS14_BUCK1235_START_SEL,		\
+	.linear_min_sel = min_sel,				\
 	.ramp_delay	= S2MPS14_BUCK_RAMP_DELAY,		\
 	.vsel_reg	= S2MPS14_REG_B1CTRL2 + (num - 1) * 2,	\
 	.vsel_mask	= S2MPS14_BUCK_VSEL_MASK,		\
@@ -613,11 +613,16 @@ static const struct regulator_desc s2mps14_regulators[] = {
 	regulator_desc_s2mps14_ldo(23, MIN_800_MV, STEP_25_MV),
 	regulator_desc_s2mps14_ldo(24, MIN_1800_MV, STEP_25_MV),
 	regulator_desc_s2mps14_ldo(25, MIN_1800_MV, STEP_25_MV),
-	regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV),
-	regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV),
-	regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV),
+	regulator_desc_s2mps14_buck(1, MIN_600_MV, STEP_6_25_MV,
+				    S2MPS14_BUCK1235_START_SEL),
+	regulator_desc_s2mps14_buck(2, MIN_600_MV, STEP_6_25_MV,
+				    S2MPS14_BUCK1235_START_SEL),
+	regulator_desc_s2mps14_buck(3, MIN_600_MV, STEP_6_25_MV,
+				    S2MPS14_BUCK1235_START_SEL),
+	regulator_desc_s2mps14_buck(4, MIN_1400_MV, STEP_12_5_MV,
+				    S2MPS14_BUCK4_START_SEL),
+	regulator_desc_s2mps14_buck(5, MIN_600_MV, STEP_6_25_MV,
+				    S2MPS14_BUCK1235_START_SEL),
 };
 
 static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/