[LKP] [ACPI] 40e7fcb1929: acpi LNXVIDEO:00: Failed to evaluate _DEP.

From: Huang Ying
Date: Fri Dec 12 2014 - 03:56:09 EST


FYI, we noticed the changes on

commit 40e7fcb19293cbdff02c74cb0668413480f82ea1 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA")

The dmesg is as follow and attached.

[ 1.332908] ACPI: Power Resource [PG00] (on)
[ 1.341096] ACPI: Power Resource [PG01] (on)
[ 1.349277] ACPI: Power Resource [PG02] (on)
[ 1.357600] ACPI: [Package] has zero elements (ffff880136a63ac0)
[ 1.364422] acpi LNXVIDEO:00: Failed to evaluate _DEP.
[ 1.379349] ACPI: [Package] has zero elements (ffff880136ac9080)
[ 1.386171] acpi device:2e: Failed to evaluate _DEP.
[ 1.393244] ACPI: [Package] has zero elements (ffff880136ac9140)
[ 1.400067] acpi INT3432:00: Failed to evaluate _DEP.
[ 1.408336] ACPI: [Package] has zero elements (ffff880136ac9700)
[ 1.415144] acpi INT3433:00: Failed to evaluate _DEP.
[ 1.425509] ACPI: [Package] has zero elements (ffff880136b47380)
[ 1.432333] acpi INT3434:00: Failed to evaluate _DEP.
[ 1.438566] ACPI: [Package] has zero elements (ffff880136b47500)
[ 1.445390] acpi INT3435:00: Failed to evaluate _DEP.
[ 1.451701] ACPI: [Package] has zero elements (ffff880136b47600)
[ 1.458526] acpi INT3436:00: Failed to evaluate _DEP.
[ 1.464734] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.471558] acpi INT3438:00: Failed to evaluate _DEP.
[ 1.477734] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.484556] acpi device:4b: Failed to evaluate _DEP.
[ 1.490566] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.497388] acpi device:4d: Failed to evaluate _DEP.
[ 1.503402] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.510226] acpi device:4f: Failed to evaluate _DEP.
[ 1.516237] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.523045] acpi device:51: Failed to evaluate _DEP.
[ 1.529055] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.535878] acpi device:53: Failed to evaluate _DEP.
[ 1.541898] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.548719] acpi device:55: Failed to evaluate _DEP.
[ 1.554724] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.561546] acpi device:57: Failed to evaluate _DEP.
[ 1.567545] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.574368] acpi device:59: Failed to evaluate _DEP.
[ 1.580116] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.586939] acpi device:5a: Failed to evaluate _DEP.
[ 1.593108] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 1.601756] ACPI: Power Resource [FN00] (off)
[ 1.606790] ACPI: Power Resource [FN01] (on)

To reproduce:

apt-get install ruby ruby-oj
git clone git://git.kernel.org/pub/scm/linux/kernel/git/wfg/lkp-tests.git
cd lkp-tests
bin/setup-local job.yaml # the job file attached in this email
bin/run-local job.yaml


Disclaimer:
Results have been estimated based on internal Intel analysis and are provided
for informational purposes only. Any difference in system hardware or software
design or configuration may affect actual performance.


Thanks,
Fengguang

---
testcase: piglit
default_monitors:
wait: pre-test
vmstat:
default_watchdogs:
watch-oom:
watchdog:
cpufreq_governor:
- performance
commit: cf12164be498180dc466ef97194ca7755ea39f3b
model: Broadwell ULT
nr_cpu: 4
memory: 4G
nr_ssd_partitions: 1
ssd_partitions: "/dev/disk/by-id/ata-INTEL_SSDSC2CW120A3_CVCV252505YF120BGN-part1"
rootfs_partition: "/dev/disk/by-id/ata-INTEL_SSDSC2CW120A3_CVCV252505YF120BGN-part2"
timeout: 30m
piglit:
group:
- igt-056
testbox: lkp-bdw01
tbox_group: lkp-bdw01
kconfig: x86_64-rhel
enqueue_time: 2014-12-08 19:34:50.302337126 +08:00
head_commit: cf12164be498180dc466ef97194ca7755ea39f3b
base_commit: b2776bf7149bddd1f4161f14f79520f17fc1d71d
branch: next/master
kernel: "/kernel/x86_64-rhel/cf12164be498180dc466ef97194ca7755ea39f3b/vmlinuz-3.18.0-next-20141208"
user: lkp
queue: cyclic
rootfs: debian-x86_64.cgz
result_root: "/result/lkp-bdw01/piglit/performance-igt-056/debian-x86_64.cgz/x86_64-rhel/cf12164be498180dc466ef97194ca7755ea39f3b/0"
job_file: "/lkp/scheduled/lkp-bdw01/cyclic_piglit-performance-igt-056-x86_64-rhel-HEAD-cf12164be498180dc466ef97194ca7755ea39f3b-0.yaml"
dequeue_time: 2014-12-09 02:41:18.322369423 +08:00
job_state: finished
loadavg: 0.45 0.12 0.04 1/94 1998
start_time: '1418064118'
end_time: '1418064121'
version: "/lkp/lkp/.src-20141206-060219"
echo performance > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
echo performance > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor
piglit run igt -t igt/kms_flip/rcs-wf_vblank-vs-dpms /tmp/lkp/piglit-results-0
piglit summary console /tmp/lkp/piglit-results-0
_______________________________________________
LKP mailing list
LKP@xxxxxxxxxxxxxxx

[ 0.000000] Linux version 3.18.0-rc6-00001-g40e7fcb (kbuild@roam) (gcc version 4.9.1 (Debian 4.9.1-19) ) #1 SMP Thu Dec 11 23:55:10 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/lkp-bdw01/validate_piglit-performance-igt-056-debian-x86_64.cgz-x86_64-rhel-40e7fcb19293cbdff02c74cb0668413480f82ea1-9.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/40e7fcb19293cbdff02c74cb0668413480f82ea1/vmlinuz-3.18.0-rc6-00001-g40e7fcb kconfig=x86_64-rhel commit=40e7fcb19293cbdff02c74cb0668413480f82ea1 branch=next/master root=/dev/ram0 max_uptime=1800 RESULT_ROOT=/result/lkp-bdw01/piglit/performance-igt-056/debian-x86_64.cgz/x86_64-rhel/40e7fcb19293cbdff02c74cb0668413480f82ea1/1 ip=::::lkp-bdw01::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009a3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a92b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a92b6000-0x00000000a92b7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a92b8000-0x00000000a92bafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a92bb000-0x00000000a92bbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a92bc000-0x00000000ac21bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ac21c000-0x00000000ac71bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ac71c000-0x00000000ac79bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ac79c000-0x00000000ac7e1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ac7e2000-0x00000000ac7fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ac7ff000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Intel Corporation Broadwell Client platform/WhiteTip Mountain 1, BIOS BDW-E1R1.86C.0104.R01.1411262003 11/26/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable
[ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00AD800000 mask 7FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xac7ff max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] Scan for SMP in [mem 0x0009a400-0x0009a7ff]
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x14e1cd000, 0x14e1cdfff] PGTABLE
[ 0.000000] BRK [0x14e1ce000, 0x14e1cefff] PGTABLE
[ 0.000000] BRK [0x14e1cf000, 0x14e1cffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff]
[ 0.000000] [mem 0x14ee00000-0x14effffff] page 2M
[ 0.000000] BRK [0x14e1d0000, 0x14e1d0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14edfffff]
[ 0.000000] [mem 0x14c000000-0x14edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
[ 0.000000] [mem 0x140000000-0x14bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xa92b5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xa91fffff] page 2M
[ 0.000000] [mem 0xa9200000-0xa92b5fff] page 4k
[ 0.000000] BRK [0x14e1d1000, 0x14e1d1fff] PGTABLE
[ 0.000000] BRK [0x14e1d2000, 0x14e1d2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xa92b8000-0xa92bafff]
[ 0.000000] [mem 0xa92b8000-0xa92bafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa92bc000-0xac21bfff]
[ 0.000000] [mem 0xa92bc000-0xa93fffff] page 4k
[ 0.000000] [mem 0xa9400000-0xac1fffff] page 2M
[ 0.000000] [mem 0xac200000-0xac21bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xac7e2000-0xac7fefff]
[ 0.000000] [mem 0xac7e2000-0xac7fefff] page 4k
[ 0.000000] RAMDISK: [mem 0x13cd21000-0x14cffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000AC7A8188 000114 (v01 INTEL BDW-ULT 00000000 01000013)
[ 0.000000] ACPI: FACP 0x00000000AC7D7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DSDT 0x00000000AC7B3000 01FF25 (v02 INTEL BDW 00000000 INTL 20130927)
[ 0.000000] ACPI: FACS 0x00000000AC783000 000040
[ 0.000000] ACPI: TCPA 0x00000000AC7DF000 000032 (v02 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: UEFI 0x00000000AC786000 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000AC7DE000 0004B5 (v02 Intel_ Tpm2Tabl 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7DD000 00004E (v02 MeSsdt MeSsdt 00003000 INTL 20130927)
[ 0.000000] ACPI: TPM2 0x00000000AC7DC000 000034 (v03 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000AC7DB000 0006BA (v02 Intel PerfTune 00001000 INTL 20130927)
[ 0.000000] ACPI: DBGP 0x00000000AC7DA000 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000AC7D9000 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: LPIT 0x00000000AC7D8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: HPET 0x00000000AC7D6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: APIC 0x00000000AC7D5000 0000BC (v03 INTEL BDW-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: MCFG 0x00000000AC7D4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: WDAT 0x00000000AC7D3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000AC7B2000 000250 (v02 INTEL sensrhub 00000000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7AE000 00342F (v02 INTEL PtidDevc 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7AD000 000C7D (v02 INTEL Ther_Rvp 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7AC000 00017F (v02 INTEL zpodd 00001000 INTL 20130927)
[ 0.000000] ACPI: BOOT 0x00000000AC7AB000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000AC7AA000 00057D (v02 PmRef Cpu0Ist 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7A9000 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7A0000 007175 (v02 SaSsdt SaSsdt 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7E0000 0006A8 (v02 CppcTa CppcTabl 00001000 INTL 20130927)
[ 0.000000] ACPI: PCCT 0x00000000AC79F000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC79E000 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
[ 0.000000] ACPI: CSRT 0x00000000AC79D000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528)
[ 0.000000] ACPI: DMAR 0x00000000AC79C000 0000F0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: FPDT 0x00000000A92BB000 000044 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: ASF! 0x00000000A92B7000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: BGRT 0x00000000A92B6000 000038 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x14efd8000-0x14effdfff]
[ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880138c00000-ffff88013cbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00099fff]
[ 0.000000] node 0: [mem 0x00100000-0xa92b5fff]
[ 0.000000] node 0: [mem 0xa92b8000-0xa92bafff]
[ 0.000000] node 0: [mem 0xa92bc000-0xac21bfff]
[ 0.000000] node 0: [mem 0xac7e2000-0xac7fefff]
[ 0.000000] node 0: [mem 0x100000000-0x14effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x14effffff]
[ 0.000000] On node 0 totalpages: 1028559
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3993 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10953 pages used for memmap
[ 0.000000] DMA32 zone: 700982 pages, LIFO batch:31
[ 0.000000] Normal zone: 5056 pages used for memmap
[ 0.000000] Normal zone: 323584 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa92b6000-0xa92b7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa92bb000-0xa92bbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac21c000-0xac71bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac71c000-0xac79bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac79c000-0xac7e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac7ff000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88014ec00000 s85056 r8192 d29632 u262144
[ 0.000000] pcpu-alloc: s85056 r8192 d29632 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012465
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/lkp-bdw01/validate_piglit-performance-igt-056-debian-x86_64.cgz-x86_64-rhel-40e7fcb19293cbdff02c74cb0668413480f82ea1-9.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/40e7fcb19293cbdff02c74cb0668413480f82ea1/vmlinuz-3.18.0-rc6-00001-g40e7fcb kconfig=x86_64-rhel commit=40e7fcb19293cbdff02c74cb0668413480f82ea1 branch=next/master root=/dev/ram0 max_uptime=1800 RESULT_ROOT=/result/lkp-bdw01/piglit/performance-igt-056/debian-x86_64.cgz/x86_64-rhel/40e7fcb19293cbdff02c74cb0668413480f82ea1/1 ip=::::lkp-bdw01::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3697848K/4114236K available (8819K kernel code, 1706K rwdata, 3916K rodata, 1836K init, 1888K bss, 416388K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:524544 nr_irqs:760 0
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.18.0-rc6-00001-g40e7fcb (kbuild@roam) (gcc version 4.9.1 (Debian 4.9.1-19) ) #1 SMP Thu Dec 11 23:55:10 CST 2014
[ 0.000000] Command line: user=lkp job=/lkp/scheduled/lkp-bdw01/validate_piglit-performance-igt-056-debian-x86_64.cgz-x86_64-rhel-40e7fcb19293cbdff02c74cb0668413480f82ea1-9.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/40e7fcb19293cbdff02c74cb0668413480f82ea1/vmlinuz-3.18.0-rc6-00001-g40e7fcb kconfig=x86_64-rhel commit=40e7fcb19293cbdff02c74cb0668413480f82ea1 branch=next/master root=/dev/ram0 max_uptime=1800 RESULT_ROOT=/result/lkp-bdw01/piglit/performance-igt-056/debian-x86_64.cgz/x86_64-rhel/40e7fcb19293cbdff02c74cb0668413480f82ea1/1 ip=::::lkp-bdw01::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009a3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a92b5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a92b6000-0x00000000a92b7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a92b8000-0x00000000a92bafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a92bb000-0x00000000a92bbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a92bc000-0x00000000ac21bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ac21c000-0x00000000ac71bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ac71c000-0x00000000ac79bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ac79c000-0x00000000ac7e1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ac7e2000-0x00000000ac7fefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ac7ff000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
[ 0.000000] bootconsole [earlyser0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Intel Corporation Broadwell Client platform/WhiteTip Mountain 1, BIOS BDW-E1R1.86C.0104.R01.1411262003 11/26/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00B0000000 mask 7FF0000000 uncachable
[ 0.000000] 2 base 00AE000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00AD800000 mask 7FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7010600070106, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xac7ff max_arch_pfn = 0x400000000
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] Scan for SMP in [mem 0x0009a400-0x0009a7ff]
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x14e1cd000, 0x14e1cdfff] PGTABLE
[ 0.000000] BRK [0x14e1ce000, 0x14e1cefff] PGTABLE
[ 0.000000] BRK [0x14e1cf000, 0x14e1cffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff]
[ 0.000000] [mem 0x14ee00000-0x14effffff] page 2M
[ 0.000000] BRK [0x14e1d0000, 0x14e1d0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14edfffff]
[ 0.000000] [mem 0x14c000000-0x14edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 1G
[ 0.000000] [mem 0x140000000-0x14bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xa92b5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xa91fffff] page 2M
[ 0.000000] [mem 0xa9200000-0xa92b5fff] page 4k
[ 0.000000] BRK [0x14e1d1000, 0x14e1d1fff] PGTABLE
[ 0.000000] BRK [0x14e1d2000, 0x14e1d2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xa92b8000-0xa92bafff]
[ 0.000000] [mem 0xa92b8000-0xa92bafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa92bc000-0xac21bfff]
[ 0.000000] [mem 0xa92bc000-0xa93fffff] page 4k
[ 0.000000] [mem 0xa9400000-0xac1fffff] page 2M
[ 0.000000] [mem 0xac200000-0xac21bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xac7e2000-0xac7fefff]
[ 0.000000] [mem 0xac7e2000-0xac7fefff] page 4k
[ 0.000000] RAMDISK: [mem 0x13cd21000-0x14cffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x00000000AC7A8188 000114 (v01 INTEL BDW-ULT 00000000 01000013)
[ 0.000000] ACPI: FACP 0x00000000AC7D7000 0000F4 (v05 INTEL BDW-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DSDT 0x00000000AC7B3000 01FF25 (v02 INTEL BDW 00000000 INTL 20130927)
[ 0.000000] ACPI: FACS 0x00000000AC783000 000040
[ 0.000000] ACPI: TCPA 0x00000000AC7DF000 000032 (v02 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: UEFI 0x00000000AC786000 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000AC7DE000 0004B5 (v02 Intel_ Tpm2Tabl 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7DD000 00004E (v02 MeSsdt MeSsdt 00003000 INTL 20130927)
[ 0.000000] ACPI: TPM2 0x00000000AC7DC000 000034 (v03 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000AC7DB000 0006BA (v02 Intel PerfTune 00001000 INTL 20130927)
[ 0.000000] ACPI: DBGP 0x00000000AC7DA000 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000AC7D9000 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: LPIT 0x00000000AC7D8000 000094 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: HPET 0x00000000AC7D6000 000038 (v01 INTEL BDW-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: APIC 0x00000000AC7D5000 0000BC (v03 INTEL BDW-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: MCFG 0x00000000AC7D4000 00003C (v01 INTEL BDW-ULT 00000001 MSFT 0000005F)
[ 0.000000] ACPI: WDAT 0x00000000AC7D3000 000104 (v01 INTEL BDW-ULT 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000AC7B2000 000250 (v02 INTEL sensrhub 00000000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7AE000 00342F (v02 INTEL PtidDevc 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7AD000 000C7D (v02 INTEL Ther_Rvp 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7AC000 00017F (v02 INTEL zpodd 00001000 INTL 20130927)
[ 0.000000] ACPI: BOOT 0x00000000AC7AB000 000028 (v01 INTEL TIANO 00000002 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000AC7AA000 00057D (v02 PmRef Cpu0Ist 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7A9000 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7A0000 007175 (v02 SaSsdt SaSsdt 00003000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC7E0000 0006A8 (v02 CppcTa CppcTabl 00001000 INTL 20130927)
[ 0.000000] ACPI: PCCT 0x00000000AC79F000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
[ 0.000000] ACPI: SSDT 0x00000000AC79E000 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
[ 0.000000] ACPI: CSRT 0x00000000AC79D000 0000C4 (v01 INTL BDW-ULT 00000001 INTL 20100528)
[ 0.000000] ACPI: DMAR 0x00000000AC79C000 0000F0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: FPDT 0x00000000A92BB000 000044 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: ASF! 0x00000000A92B7000 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: BGRT 0x00000000A92B6000 000038 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x14efd8000-0x14effdfff]
[ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880138c00000-ffff88013cbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00099fff]
[ 0.000000] node 0: [mem 0x00100000-0xa92b5fff]
[ 0.000000] node 0: [mem 0xa92b8000-0xa92bafff]
[ 0.000000] node 0: [mem 0xa92bc000-0xac21bfff]
[ 0.000000] node 0: [mem 0xac7e2000-0xac7fefff]
[ 0.000000] node 0: [mem 0x100000000-0x14effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x14effffff]
[ 0.000000] On node 0 totalpages: 1028559
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3993 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10953 pages used for memmap
[ 0.000000] DMA32 zone: 700982 pages, LIFO batch:31
[ 0.000000] Normal zone: 5056 pages used for memmap
[ 0.000000] Normal zone: 323584 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff57c000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff57b000 (fec00000)
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa92b6000-0xa92b7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa92bb000-0xa92bbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac21c000-0xac71bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac71c000-0xac79bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac79c000-0xac7e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xac7ff000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[ 0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88014ec00000 s85056 r8192 d29632 u262144
[ 0.000000] pcpu-alloc: s85056 r8192 d29632 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012465
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: user=lkp job=/lkp/scheduled/lkp-bdw01/validate_piglit-performance-igt-056-debian-x86_64.cgz-x86_64-rhel-40e7fcb19293cbdff02c74cb0668413480f82ea1-9.yaml ARCH=x86_64 BOOT_IMAGE=/kernel/x86_64-rhel/40e7fcb19293cbdff02c74cb0668413480f82ea1/vmlinuz-3.18.0-rc6-00001-g40e7fcb kconfig=x86_64-rhel commit=40e7fcb19293cbdff02c74cb0668413480f82ea1 branch=next/master root=/dev/ram0 max_uptime=1800 RESULT_ROOT=/result/lkp-bdw01/piglit/performance-igt-056/debian-x86_64.cgz/x86_64-rhel/40e7fcb19293cbdff02c74cb0668413480f82ea1/1 ip=::::lkp-bdw01::dhcp earlyprintk=ttyS0,115200 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3697848K/4114236K available (8819K kernel code, 1706K rwdata, 3916K rodata, 1836K init, 1888K bss, 416388K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:524544 nr_irqs:760 0
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] bootconsole [earlyser0] disabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.671 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.34 BogoMIPS (lpj=2294671)
[ 0.012055] pid_max: default: 32768 minimum: 301
[ 0.017286] ACPI: Core revision 20140926
[ 0.058470] ACPI: All ACPI Tables successfully acquired
[ 0.064431] Security Framework initialized
[ 0.069072] SELinux: Initializing.
[ 0.073025] SELinux: Starting in permissive mode
[ 0.078612] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.087558] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.095870] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.103460] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.111715] Initializing cgroup subsys memory
[ 0.116649] Initializing cgroup subsys devices
[ 0.121678] Initializing cgroup subsys freezer
[ 0.126707] Initializing cgroup subsys net_cls
[ 0.131737] Initializing cgroup subsys blkio
[ 0.136570] Initializing cgroup subsys perf_event
[ 0.141894] Initializing cgroup subsys hugetlb
[ 0.146943] CPU: Physical Processor ID: 0
[ 0.151480] CPU: Processor Core ID: 0
[ 0.156627] mce: CPU supports 7 MCE banks
[ 0.161171] CPU0: Thermal LVT vector (0xfa) already installed
[ 0.167682] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.167682] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.180922] Freeing SMP alternatives memory: 36K (ffffffff81fea000 - ffffffff81ff3000)
[ 0.190822] ftrace: allocating 31386 entries in 123 pages
[ 0.210298] Getting VERSION: 1060015
[ 0.214348] Getting VERSION: 1060015
[ 0.218399] Getting ID: 0
[ 0.221362] Getting ID: 0
[ 0.224333] dmar: Host address width 39
[ 0.228674] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.234695] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.244357] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.250376] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.259536] dmar: RMRR base: 0x000000ac6ab000 end: 0x000000ac6befff
[ 0.266635] dmar: RMRR base: 0x000000ad800000 end: 0x000000afffffff
[ 0.273735] dmar: ANDD device: 1 name: \_SB.PCI0.SDMA
[ 0.279457] dmar: ANDD device: 2 name: \_SB.PCI0.SDHC
[ 0.285303] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.291615] HPET id 0 under DRHD base 0xfed91000
[ 0.296843] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.305718] Your BIOS is broken and requested that x2apic be disabled.
[ 0.305718] This will slightly decrease performance.
[ 0.305718] Use 'intremap=no_x2apic_optout' to override BIOS request.
[ 0.326228] Enabled IRQ remapping in xapic mode
[ 0.331361] x2apic not enabled, IRQ remapping is in xapic mode
[ 0.337977] masked ExtINT on CPU#0
[ 0.342264] ENABLING IO-APIC IRQs
[ 0.346018] init IO_APIC IRQs
[ 0.349378] apic 2 pin 0 not connected
[ 0.353722] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[ 0.362695] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.377972] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.386944] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.402220] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[ 0.411206] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.426483] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[ 0.435456] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:33 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.450726] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[ 0.459700] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:34 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.474976] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1)
[ 0.483940] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:35 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.499218] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[ 0.508192] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:36 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.523468] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[ 0.532431] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:37 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.547709] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[ 0.556681] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.571957] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[ 0.580930] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:39 Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.596205] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1)
[ 0.605376] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3A Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.620652] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1)
[ 0.629812] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3B Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.645089] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[ 0.654260] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3C Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.669525] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[ 0.678696] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3D Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.693969] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[ 0.703139] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3E Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.718417] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[ 0.727586] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:3F Dest:00000100 SID:F0F8 SQ:0 SVT:1)
[ 0.742862] apic 2 pin 16 not connected
[ 0.747306] apic 2 pin 17 not connected
[ 0.751748] apic 2 pin 18 not connected
[ 0.756192] apic 2 pin 19 not connected
[ 0.760635] apic 2 pin 20 not connected
[ 0.765077] apic 2 pin 21 not connected
[ 0.769520] apic 2 pin 22 not connected
[ 0.773965] apic 2 pin 23 not connected
[ 0.778409] apic 2 pin 24 not connected
[ 0.782852] apic 2 pin 25 not connected
[ 0.787294] apic 2 pin 26 not connected
[ 0.791734] apic 2 pin 27 not connected
[ 0.796175] apic 2 pin 28 not connected
[ 0.800616] apic 2 pin 29 not connected
[ 0.805059] apic 2 pin 30 not connected
[ 0.809501] apic 2 pin 31 not connected
[ 0.813945] apic 2 pin 32 not connected
[ 0.818389] apic 2 pin 33 not connected
[ 0.822834] apic 2 pin 34 not connected
[ 0.827277] apic 2 pin 35 not connected
[ 0.831721] apic 2 pin 36 not connected
[ 0.836164] apic 2 pin 37 not connected
[ 0.840606] apic 2 pin 38 not connected
[ 0.845049] apic 2 pin 39 not connected
[ 0.849634] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.866436] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (fam: 06, model: 3d, stepping: 04)
[ 0.877025] TSC deadline timer enabled
[ 0.881292] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.892770] ... version: 3
[ 0.897312] ... bit width: 48
[ 0.901953] ... generic registers: 4
[ 0.906493] ... value mask: 0000ffffffffffff
[ 0.912511] ... max period: 0000ffffffffffff
[ 0.918528] ... fixed-purpose events: 3
[ 0.923070] ... event mask: 000000070000000f
[ 0.930740] x86: Booting SMP configuration:
[ 0.935482] .... node #0, CPUs: #1
[ 0.950857] masked ExtINT on CPU#1
[ 0.955951] CPU1: Thermal LVT vector (0xfa) already installed
[ 0.964552] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.973711] #2
[ 0.986606] masked ExtINT on CPU#2
[ 0.991703] CPU2: Thermal LVT vector (0xfa) already installed
[ 1.000346] #3
[ 1.013238] masked ExtINT on CPU#3
[ 1.018330] CPU3: Thermal LVT vector (0xfa) already installed
[ 1.026877] x86: Booted up 1 node, 4 CPUs
[ 1.031420] smpboot: Total of 4 processors activated (18357.36 BogoMIPS)
[ 1.042795] devtmpfs: initialized
[ 1.048411] evm: security.selinux
[ 1.052165] evm: security.ima
[ 1.055526] evm: security.capability
[ 1.059689] PM: Registering ACPI NVS region [mem 0xac71c000-0xac79bfff] (524288 bytes)
[ 1.069513] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[ 1.078206] NET: Registered protocol family 16
[ 1.086244] cpuidle: using governor menu
[ 1.090799] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.099381] ACPI: bus type PCI registered
[ 1.103922] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.111278] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.121829] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 1.129808] PCI: Using configuration type 1 for base access
[ 1.140439] ACPI: Added _OSI(Module Device)
[ 1.145179] ACPI: Added _OSI(Processor Device)
[ 1.150213] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.155544] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.165309] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:15)
[ 1.174387] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:39 Dest:00000F00 SID:F0F8 SQ:0 SVT:1)
[ 1.196972] ACPI: Executed 20 blocks of module-level executable AML code
[ 1.228564] ACPI: Dynamic OEM Table Load:
[ 1.233143] ACPI: SSDT 0xFFFF880136881800 0004AE (v02 PmRef Cpu0Cst 00003001 INTL 20130927)
[ 1.247000] ACPI: Dynamic OEM Table Load:
[ 1.251578] ACPI: SSDT 0xFFFF880136881000 000792 (v02 PmRef ApIst 00003000 INTL 20130927)
[ 1.265172] ACPI: Dynamic OEM Table Load:
[ 1.269737] ACPI: SSDT 0xFFFF8801369FB200 000119 (v02 PmRef ApCst 00003000 INTL 20130927)
[ 1.286802] ACPI: Interpreter enabled
[ 1.290972] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 1.301463] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 1.311984] ACPI: (supports S0 S3 S4 S5)
[ 1.316428] ACPI: Using IOAPIC for interrupt routing
[ 1.322097] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.332908] ACPI: Power Resource [PG00] (on)
[ 1.341096] ACPI: Power Resource [PG01] (on)
[ 1.349277] ACPI: Power Resource [PG02] (on)
[ 1.357600] ACPI: [Package] has zero elements (ffff880136a63ac0)
[ 1.364422] acpi LNXVIDEO:00: Failed to evaluate _DEP.
[ 1.379349] ACPI: [Package] has zero elements (ffff880136ac9080)
[ 1.386171] acpi device:2e: Failed to evaluate _DEP.
[ 1.393244] ACPI: [Package] has zero elements (ffff880136ac9140)
[ 1.400067] acpi INT3432:00: Failed to evaluate _DEP.
[ 1.408336] ACPI: [Package] has zero elements (ffff880136ac9700)
[ 1.415144] acpi INT3433:00: Failed to evaluate _DEP.
[ 1.425509] ACPI: [Package] has zero elements (ffff880136b47380)
[ 1.432333] acpi INT3434:00: Failed to evaluate _DEP.
[ 1.438566] ACPI: [Package] has zero elements (ffff880136b47500)
[ 1.445390] acpi INT3435:00: Failed to evaluate _DEP.
[ 1.451701] ACPI: [Package] has zero elements (ffff880136b47600)
[ 1.458526] acpi INT3436:00: Failed to evaluate _DEP.
[ 1.464734] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.471558] acpi INT3438:00: Failed to evaluate _DEP.
[ 1.477734] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.484556] acpi device:4b: Failed to evaluate _DEP.
[ 1.490566] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.497388] acpi device:4d: Failed to evaluate _DEP.
[ 1.503402] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.510226] acpi device:4f: Failed to evaluate _DEP.
[ 1.516237] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.523045] acpi device:51: Failed to evaluate _DEP.
[ 1.529055] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.535878] acpi device:53: Failed to evaluate _DEP.
[ 1.541898] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.548719] acpi device:55: Failed to evaluate _DEP.
[ 1.554724] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.561546] acpi device:57: Failed to evaluate _DEP.
[ 1.567545] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.574368] acpi device:59: Failed to evaluate _DEP.
[ 1.580116] ACPI: [Package] has zero elements (ffff880136b47700)
[ 1.586939] acpi device:5a: Failed to evaluate _DEP.
[ 1.593108] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[ 1.601756] ACPI: Power Resource [FN00] (off)
[ 1.606790] ACPI: Power Resource [FN01] (on)
[ 1.612044] ACPI: Power Resource [FN02] (on)
[ 1.617000] ACPI: Power Resource [FN03] (on)
[ 1.621940] ACPI: Power Resource [FN04] (off)
[ 1.628133] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.635141] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.645484] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 1.655899] PCI host bridge to bus 0000:00
[ 1.660555] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 1.666787] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.673806] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.680823] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.688629] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff]
[ 1.696443] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 1.703525] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 1.710350] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[ 1.718060] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.726262] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 1.732849] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 1.739662] pci 0000:00:03.0: reg 0x10: [mem 0xd1130000-0xd1133fff 64bit]
[ 1.747646] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 1.754487] pci 0000:00:14.0: reg 0x10: [mem 0xd1120000-0xd112ffff 64bit]
[ 1.762255] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.769090] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.775551] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 1.782393] pci 0000:00:16.0: reg 0x10: [mem 0xd1135000-0xd113501f 64bit]
[ 1.790166] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.797334] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 1.804170] pci 0000:00:19.0: reg 0x10: [mem 0xd1100000-0xd111ffff]
[ 1.811292] pci 0000:00:19.0: reg 0x14: [mem 0xd1138000-0xd1138fff]
[ 1.818415] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 1.824800] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.831938] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 1.838397] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 1.845286] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.852408] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.858878] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 1.866050] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[ 1.872885] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 1.879219] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7]
[ 1.885553] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 1.891887] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3]
[ 1.898212] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 1.904546] pci 0000:00:1f.2: reg 0x24: [mem 0xd1137000-0xd11377ff]
[ 1.911698] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.917884] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 1.924718] pci 0000:00:1f.3: reg 0x10: [mem 0xd1134000-0xd11340ff 64bit]
[ 1.932443] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 1.939027] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[ 1.945878] pci 0000:00:1f.6: reg 0x10: [mem 0xd1136000-0xd1136fff 64bit]
[ 1.953994] pci 0000:01:00.0: [8086:08b1] type 00 class 0x028000
[ 1.960838] pci 0000:01:00.0: reg 0x10: [mem 0xd1000000-0xd1001fff 64bit]
[ 1.968732] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 1.975691] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.984121] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.989763] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd10fffff]
[ 1.997482] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 2.008357] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
[ 2.017448] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.026738] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
[ 2.035833] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
[ 2.044925] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
[ 2.054016] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.063315] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.072586] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.082344] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 2.088054] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 2.095869] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 2.102280] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.111474] vgaarb: loaded
[ 2.114557] vgaarb: bridge control possible 0000:00:02.0
[ 2.120669] SCSI subsystem initialized
[ 2.124962] ACPI: bus type USB registered
[ 2.129538] usbcore: registered new interface driver usbfs
[ 2.135788] usbcore: registered new interface driver hub
[ 2.141932] usbcore: registered new device driver usb
[ 2.147728] pps_core: LinuxPPS API ver. 1 registered
[ 2.153376] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 2.163775] PTP clock support registered
[ 2.168485] PCI: Using ACPI for IRQ routing
[ 2.178534] PCI: pci_cache_line_size set to 64 bytes
[ 2.184188] e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff]
[ 2.190997] e820: reserve RAM buffer [mem 0xa92b6000-0xabffffff]
[ 2.197803] e820: reserve RAM buffer [mem 0xa92bb000-0xabffffff]
[ 2.204611] e820: reserve RAM buffer [mem 0xac21c000-0xafffffff]
[ 2.211417] e820: reserve RAM buffer [mem 0xac7ff000-0xafffffff]
[ 2.218224] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
[ 2.225339] NetLabel: Initializing
[ 2.229194] NetLabel: domain hash size = 128
[ 2.234130] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.239765] NetLabel: unlabeled traffic allowed by default
[ 2.246184] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.253288] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.261921] Switched to clocksource hpet
[ 2.274467] pnp: PnP ACPI init
[ 2.278273] system 00:00: [io 0x06a4] has been reserved
[ 2.284300] system 00:00: [io 0x06a0] has been reserved
[ 2.290323] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.298268] system 00:01: [io 0x0680-0x069f] has been reserved
[ 2.304979] system 00:01: [io 0xffff] has been reserved
[ 2.311000] system 00:01: [io 0xffff] has been reserved
[ 2.317022] system 00:01: [io 0xffff] has been reserved
[ 2.323043] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 2.330149] system 00:01: [io 0x164e-0x164f] has been reserved
[ 2.336859] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.344579] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:15)
[ 2.353658] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:38 Dest:00000F00 SID:F0F8 SQ:0 SVT:1)
[ 2.368952] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.376389] system 00:03: [io 0x1854-0x1857] has been reserved
[ 2.383101] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 2.391701] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:15)
[ 2.400778] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:34 Dest:00000F00 SID:F0F8 SQ:0 SVT:1)
[ 2.416069] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.423547] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:15)
[ 2.432615] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000F00 SID:F0F8 SQ:0 SVT:1)
[ 2.447906] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 2.456078] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
[ 2.463578] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
[ 2.471076] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
[ 2.478576] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
[ 2.486065] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
[ 2.493565] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
[ 2.501065] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
[ 2.508565] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.517643] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.525140] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.532631] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.540129] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.547625] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.555122] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.562612] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 2.570504] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 2.578395] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.586289] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 2.594182] system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved
[ 2.601682] system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved
[ 2.609178] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.617159] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved
[ 2.625055] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.632930] pnp: PnP ACPI: found 9 devices
[ 2.643580] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.649211] pci 0000:00:1c.0: bridge window [mem 0xd1000000-0xd10fffff]
[ 2.656912] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.663234] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.669550] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.676654] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff]
[ 2.683757] pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd10fffff]
[ 2.690884] NET: Registered protocol family 2
[ 2.695980] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.704229] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 2.711787] TCP: Hash tables configured (established 32768 bind 32768)
[ 2.719219] TCP: reno registered
[ 2.722888] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.729712] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.737067] NET: Registered protocol family 1
[ 2.742077] RPC: Registered named UNIX socket transport module.
[ 2.748791] RPC: Registered udp transport module.
[ 2.754122] RPC: Registered tcp transport module.
[ 2.759451] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.766771] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.773288] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 2.780099] pci 0000:00:14.0: PCI INT A: no GSI
[ 2.785310] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 2.792138] PCI: CLS 0 bytes, default 64
[ 2.796635] Unpacking initramfs...
[ 6.828889] Freeing initrd memory: 265084K (ffff88013cd21000 - ffff88014d000000)
[ 6.837298] dmar: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
[ 6.845393] dmar: ACPI device "INT3436:00" under DMAR at fed91000 as 00:17.0
[ 6.853392] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 6.860694] software IO TLB [mem 0xa52b6000-0xa92b6000] (64MB) mapped at [ffff8800a52b6000-ffff8800a92b5fff]
[ 6.871945] Simple Boot Flag at 0x47 set to 0x80
[ 6.877848] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 6.884976] Initialise system trusted keyring
[ 6.889935] audit: initializing netlink subsys (disabled)
[ 6.896067] audit: type=2000 audit(1418359710.161:1): initialized
[ 6.903236] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 6.911827] zpool: loaded
[ 6.914796] zbud: loaded
[ 6.917835] VFS: Disk quotas dquot_6.5.2
[ 6.922303] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 6.930036] SGI XFS with ACLs, security attributes, no debug enabled
[ 6.937579] 9p: Installing v9fs 9p2000 file system support
[ 6.943830] msgmni has been set to 7740
[ 6.948232] Key type big_key registered
[ 6.952580] SELinux: Registering netfilter hooks
[ 6.958452] NET: Registered protocol family 38
[ 6.963497] Key type asymmetric registered
[ 6.968142] Asymmetric key parser 'x509' registered
[ 6.973702] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 6.982120] io scheduler noop registered
[ 6.986569] io scheduler deadline registered (default)
[ 6.992399] io scheduler cfq registered
[ 6.996914] IOAPIC[0]: Set routing entry (2-16 -> 0x61 -> IRQ 16 Mode:1 Active:1 Dest:15)
[ 7.006190] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:61 Dest:00000F00 SID:F0F8 SQ:0 SVT:1)
[ 7.021494] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 7.027496] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 7.035389] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 7.042790] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 7.050399] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.056729] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 7.064275] intel_idle: MWAIT substates: 0x11142120
[ 7.069802] intel_idle: v0.4 model 0x3D
[ 7.074149] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 7.081050] ACPI: AC Adapter [ADP1] (off-line)
[ 7.086165] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:00/PNP0C0D:00/input/input0
[ 7.098710] ACPI: Lid Switch [LID0]
[ 7.102724] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 7.112194] ACPI: Power Button [PWRB]
[ 7.116371] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 7.125838] ACPI: Sleep Button [SLPB]
[ 7.130008] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 7.138393] ACPI: Power Button [PWRF]
[ 7.170097] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.176517] ACPI: Thermal Zone [TZ00] (77 C)
[ 7.182150] thermal LNXTHERM:01: registered as thermal_zone1
[ 7.188566] ACPI: Thermal Zone [TZ01] (77 C)
[ 7.193442] GHES: HEST is not enabled!
[ 7.193715] ACPI: Battery Slot [BAT0] (battery present)
[ 7.193751] ACPI: Battery Slot [BAT1] (battery absent)
[ 7.193829] ACPI: Battery Slot [BAT2] (battery absent)
[ 7.215345] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 7.252618] Non-volatile memory driver v1.3
[ 7.257371] Linux agpgart interface v0.103
[ 7.262227] mei_me 0000:00:16.0: irq 43 for MSI/MSI-X
[ 7.269561] rdac: device handler registered
[ 7.274360] hp_sw: device handler registered
[ 7.279206] emc: device handler registered
[ 7.283855] alua: device handler registered
[ 7.288637] libphy: Fixed MDIO Bus: probed
[ 7.293321] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 7.301315] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 7.307846] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 7.314460] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 7.321254] IOAPIC[0]: Set routing entry (2-20 -> 0x91 -> IRQ 20 Mode:1 Active:1 Dest:15)
[ 7.330532] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:91 Dest:00000F00 SID:F0F8 SQ:0 SVT:1)
[ 7.345858] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 7.356424] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 7.526330] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 7.532551] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:e4:31
[ 7.541528] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 7.549341] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 7.557150] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
[ 7.565140] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 7.571469] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k
[ 7.580245] ixgbe: Copyright (c) 1999-2014 Intel Corporation.
[ 7.586811] usbcore: registered new interface driver catc
[ 7.592939] usbcore: registered new interface driver kaweth
[ 7.599258] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 7.607648] usbcore: registered new interface driver pegasus
[ 7.614071] usbcore: registered new interface driver rtl8150
[ 7.620495] usbcore: registered new interface driver asix
[ 7.626623] usbcore: registered new interface driver cdc_ether
[ 7.633242] usbcore: registered new interface driver cdc_eem
[ 7.639662] usbcore: registered new interface driver dm9601
[ 7.645988] usbcore: registered new interface driver smsc75xx
[ 7.652510] usbcore: registered new interface driver smsc95xx
[ 7.659030] usbcore: registered new interface driver gl620a
[ 7.665354] usbcore: registered new interface driver net1080
[ 7.671776] usbcore: registered new interface driver plusb
[ 7.678000] usbcore: registered new interface driver rndis_host
[ 7.684716] usbcore: registered new interface driver cdc_subset
[ 7.691434] usbcore: registered new interface driver zaurus
[ 7.697789] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 7.706472] usbcore: registered new interface driver int51x1
[ 7.713012] usbcore: registered new interface driver ipheth
[ 7.719402] usbcore: registered new interface driver sierra_net
[ 7.726318] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 7.733625] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 7.739267] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 7.745312] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 7.753777] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 7.761489] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
[ 7.767464] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.775162] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.783349] usb usb1: Product: xHCI Host Controller
[ 7.788877] usb usb1: Manufacturer: Linux 3.18.0-rc6-00001-g40e7fcb xhci-hcd
[ 7.796866] usb usb1: SerialNumber: 0000:00:14.0
[ 7.802251] hub 1-0:1.0: USB hub found
[ 7.806520] hub 1-0:1.0: 11 ports detected
[ 7.814991] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 7.820955] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 7.829370] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 7.837070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.845255] usb usb2: Product: xHCI Host Controller
[ 7.850783] usb usb2: Manufacturer: Linux 3.18.0-rc6-00001-g40e7fcb xhci-hcd
[ 7.858770] usb usb2: SerialNumber: 0000:00:14.0
[ 7.864091] hub 2-0:1.0: USB hub found
[ 7.868350] hub 2-0:1.0: 4 ports detected
[ 7.874468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.881874] tsc: Refined TSC clocksource calibration: 2294.687 MHz
[ 7.888887] ehci-pci: EHCI PCI platform driver
[ 7.893936] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.900948] ohci-pci: OHCI PCI platform driver
[ 7.905997] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.913239] usbcore: registered new interface driver usbserial
[ 7.919901] usbcore: registered new interface driver usbserial_generic
[ 7.927306] usbserial: USB Serial support registered for generic
[ 7.934137] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 7.941838] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 7.953867] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 7.959567] mousedev: PS/2 mouse device common for all mice
[ 7.966081] rtc_cmos 00:02: RTC can wake from S4
[ 7.971450] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 7.978405] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 7.987110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.993444] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 8.002433] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.003658] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 8.019012] iTCO_vendor_support: vendor-support=0
[ 8.024355] Intel P-state driver initializing.
[ 8.030932] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.037336] usbcore: registered new interface driver usbhid
[ 8.043678] usbhid: USB HID core driver
[ 8.048082] drop_monitor: Initializing network drop monitor service
[ 8.055268] TCP: cubic registered
[ 8.059027] Initializing XFRM netlink socket
[ 8.064004] NET: Registered protocol family 10
[ 8.069283] NET: Registered protocol family 17
[ 8.074334] 9pnet: Installing 9P2000 support
[ 8.079450]
[ 8.079450] printing PIC contents
[ 8.084883] ... PIC IMR: ffff
[ 8.088342] ... PIC IRR: 0c00
[ 8.091813] ... PIC ISR: 0000
[ 8.095285] ... PIC ELCR: 0c00
[ 8.098764] printing local APIC contents on CPU#0/0:
[ 8.104391] ... APIC ID: 00000000 (0)
[ 8.109032] ... APIC VERSION: 01060015
[ 8.113276] ... APIC TASKPRI: 00000000 (00)
[ 8.118010] ... APIC PROCPRI: 00000000
[ 8.122255] ... APIC LDR: 01000000
[ 8.126107] ... APIC DFR: ffffffff
[ 8.129961] ... APIC SPIV: 000001ff
[ 8.133911] ... APIC ISR field:
[ 8.137468] 0000000000000000000000000000000000000000000000000000000000000000
[ 8.145532] ... APIC TMR field:
[ 8.149088] 0000000000000000000200020000000200000000000000000000000000000000
[ 8.157154] ... APIC IRR field:
[ 8.160710] 0000000000000000000000000000000000000000000000000000000000000000
[ 8.168785] ... APIC ESR: 00000000
[ 8.172638] ... APIC ICR: 000008fd
[ 8.172658] usb 1-6: new low-speed USB device number 2 using xhci_hcd
[ 8.183784] ... APIC ICR2: 02000000
[ 8.187733] ... APIC LVTT: 000400ef
[ 8.191682] ... APIC LVTPC: 00000400
[ 8.195729] ... APIC LVT0: 00010700
[ 8.199681] ... APIC LVT1: 00000400
[ 8.203630] ... APIC LVTERR: 000000fe
[ 8.207777] ... APIC TMICT: 00000000
[ 8.211826] ... APIC TMCCT: 00000000
[ 8.215874] ... APIC TDCR: 00000000
[ 8.219822]
[ 8.221508] number of MP IRQ sources: 15.
[ 8.226055] number of IO-APIC #2 registers: 40.
[ 8.231190] testing the IO APIC.......................
[ 8.237020] IO APIC #2......
[ 8.240284] .... register #00: 02000000
[ 8.244624] ....... : physical APIC id: 02
[ 8.249561] ....... : Delivery Type: 0
[ 8.254106] ....... : LTS : 0
[ 8.258653] .... register #01: 00270020
[ 8.262999] ....... : max redirection entries: 27
[ 8.268723] ....... : PRQ implemented: 0
[ 8.273562] ....... : IO APIC version: 20
[ 8.278500] .... register #02: 00000000
[ 8.282849] ....... : arbitration: 00
[ 8.287392] .... IRQ redirection table:
[ 8.291743] 0 1 0 0 0 0 0 0 00
[ 8.297374] 1 0 0 0 0 0 0 0 01
[ 8.303004] 1 0 0 0 0 0 0 0 02
[ 8.308635] 1 0 0 0 0 0 0 0 03
[ 8.314265] 1 0 0 0 0 0 0 0 04
[ 8.319895] 1 0 0 0 0 0 0 0 05
[ 8.325525] 1 0 0 0 0 0 0 0 06
[ 8.331155] 1 0 0 0 0 0 0 0 07
[ 8.336786] 1 0 0 0 0 0 0 0 08
[ 8.342419] 1 0 1 0 0 0 0 0 09
[ 8.348049] 1 0 0 0 0 0 0 0 0A
[ 8.353681] 1 0 0 0 0 0 0 0 0B
[ 8.359314] 1 0 0 0 0 0 0 0 0C
[ 8.364947] 1 0 0 0 0 0 0 0 0D
[ 8.370577] 1 0 0 0 0 0 0 0 0E
[ 8.376210] 1 0 0 0 0 0 0 0 0F
[ 8.381841] 1 1 1 0 1 0 0 0 10
[ 8.387469] 0 1 0 0 0 0 0 0 00
[ 8.393098] 0 1 0 0 0 0 0 0 00
[ 8.398728] 0 1 0 0 0 0 0 0 00
[ 8.404356] 1 1 1 0 1 0 0 0 14
[ 8.406630] usb 1-6: New USB device found, idVendor=045e, idProduct=00dd
[ 8.406632] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8.406633] usb 1-6: Product: Comfort Curve Keyboard 2000
[ 8.406634] usb 1-6: Manufacturer: Microsoft
[ 8.406724] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8.406727] usb 1-6: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8.414350] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:045E:00DD.0001/input/input5
[ 8.414468] hid-generic 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-6/input0
[ 8.425116] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:045E:00DD.0002/input/input6
[ 8.425233] hid-generic 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:14.0-6/input1
[ 8.515880] 0 1 0 0 0 0 0 0 00
[ 8.521511] 0 1 0 0 0 0 0 0 00
[ 8.527140] 0 1 0 0 0 0 0 0 00
[ 8.532770] 0 1 0 0 0 0 0 0 00
[ 8.538402] 0 1 0 0 0 0 0 0 00
[ 8.544031] 0 1 0 0 0 0 0 0 00
[ 8.549663] 0 1 0 0 0 0 0 0 00
[ 8.555293] 0 1 0 0 0 0 0 0 00
[ 8.560923] 0 1 0 0 0 0 0 0 00
[ 8.566552] 0 1 0 0 0 0 0 0 00
[ 8.572183] 0 1 0 0 0 0 0 0 00
[ 8.577431] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 8.585214] 0 1 0 0 0 0 0 0 00
[ 8.590843] 0 1 0 0 0 0 0 0 00
[ 8.596471] 0 1 0 0 0 0 0 0 00
[ 8.602101] 0 1 0 0 0 0 0 0 00
[ 8.607729] 0 1 0 0 0 0 0 0 00
[ 8.613358] 0 1 0 0 0 0 0 0 00
[ 8.618989] 0 1 0 0 0 0 0 0 00
[ 8.624620] 0 1 0 0 0 0 0 0 00
[ 8.630247] IRQ to pin mappings:
[ 8.633905] IRQ0 -> 0:2
[ 8.636692] IRQ1 -> 0:1
[ 8.639489] IRQ3 -> 0:3
[ 8.642269] IRQ4 -> 0:4
[ 8.645066] IRQ5 -> 0:5
[ 8.647858] IRQ6 -> 0:6
[ 8.650651] IRQ7 -> 0:7
[ 8.653446] IRQ8 -> 0:8
[ 8.656239] IRQ9 -> 0:9
[ 8.659034] IRQ10 -> 0:10
[ 8.662026] IRQ11 -> 0:11
[ 8.665017] IRQ12 -> 0:12
[ 8.668008] IRQ13 -> 0:13
[ 8.671001] IRQ14 -> 0:14
[ 8.673992] IRQ15 -> 0:15
[ 8.676985] IRQ16 -> 0:16
[ 8.679976] IRQ20 -> 0:20
[ 8.682960] .................................... done.
[ 8.688999] Loading compiled-in X.509 certificates
[ 8.695230] Loaded X.509 cert 'Magrathea: Glacier signing key: 07916f9e19937f63891c01a14d49a84c4fd31c34'
[ 8.705994] registered taskstats version 1
[ 8.712030] Key type trusted registered
[ 8.717570] Key type encrypted registered
[ 8.723262] ima: No TPM chip found, activating TPM-bypass!
[ 8.729510] evm: HMAC attrs: 0x1
[ 8.733672] rtc_cmos 00:02: setting system clock to 2014-12-12 04:48:36 UTC (1418359716)
[ 8.744345] usb 1-8: New USB device found, idVendor=8087, idProduct=07dc
[ 8.751945] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.842906] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 8.888381] Switched to clocksource tsc
[ 8.949296] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 8.955081] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.675316] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.683923] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 11.694709] Sending DHCP requests .., OK
[ 14.639162] IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.151
[ 14.647977] IP-Config: Complete:
[ 14.651636] device=eth0, hwaddr=00:13:20:fc:e4:31, ipaddr=192.168.1.151, mask=255.255.255.0, gw=192.168.1.1
[ 14.663172] host=lkp-bdw01, domain=lkp.intel.com, nis-domain=(none)
[ 14.670767] bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=
[ 14.678361] nameserver0=192.168.1.1
[ 14.683028] PM: Hibernation image not present or could not be loaded.
[ 14.691210] Freeing unused kernel memory: 1836K (ffffffff81e1f000 - ffffffff81fea000)
[ 14.828098] [drm] Initialized drm 1.1.0 20060810
[ 14.844756] sdhci: Secure Digital Host Controller Interface driver
[ 14.851800] sdhci: Copyright(c) Pierre Ossman
[ 14.883659] [drm] Memory usable by graphics device = 4096M
[ 14.889886] [drm] Replacing VGA console driver
[ 14.900983] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 14.906522] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.914017] [drm] Driver supports precise vblank timestamp query.
[ 14.921008] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 15.178081] libata version 3.00 loaded.
[ 15.182671] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 15.192232] Error: Driver 'pcspkr' is already registered, aborting...
[ 15.964323] [drm:stop_ring] *ERROR* render ring : timed out trying to stop ring
[ 16.973771] [drm:stop_ring] *ERROR* render ring : timed out trying to stop ring
[ 16.982064] [drm:init_ring_common] *ERROR* failed to set render ring head to zero ctl 0001f001 head 05e13f78 tail 00013f78 start 00fe5000
[ 16.996064] [drm:i915_gem_init] *ERROR* Failed to initialize GPU, declaring it wedged
[ 17.006891] fbcon: inteldrmfb (fb0) is primary device
[ 17.011891] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.011979] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 17.012072] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 17.012190] IOAPIC[0]: Set routing entry (2-18 -> 0x22 -> IRQ 18 Mode:1 Active:1 Dest:15)
[ 17.012196] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:22 Dest:00000F00 SID:F0F8 SQ:0 SVT:1)
[ 17.012206] ACPI Warning: SystemIO range 0x000000000000efa0-0x000000000000efbf conflicts with OpRegion 0x000000000000efa0-0x000000000000efaf (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
[ 17.012208] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.012576] ahci 0000:00:1f.2: version 3.0
[ 17.012667] IOAPIC[0]: Set routing entry (2-19 -> 0x42 -> IRQ 19 Mode:1 Active:1 Dest:15)
[ 17.012671] IOAPIC[0]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:42 Dest:00000F00 SID:F0F8 SQ:0 SVT:1)
[ 17.012706] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 17.012810] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 17.019070] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 17.019160] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 17.020203] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 17.023725] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x2 impl SATA mode
[ 17.023727] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 17.024101] scsi host0: ahci
[ 17.024207] scsi host1: ahci
[ 17.024292] scsi host2: ahci
[ 17.024341] ata1: DUMMY
[ 17.024343] ata2: SATA max UDMA/133 abar m2048@0xd1137000 port 0xd1137180 irq 47
[ 17.024344] ata3: DUMMY
[ 17.328582] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 17.339611] ata2.00: ATA-9: INTEL SSDSC2CW120A3, 400i, max UDMA/133
[ 17.339613] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 17.349605] ata2.00: configured for UDMA/133
[ 18.088181] Console: switching to colour frame buffer device 240x67
[ 18.330143] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 18.337185] i915 0000:00:02.0: registered panic notifier
[ 18.349119] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CW12 400i PQ: 0 ANSI: 5
[ 18.363432] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 18.371981] sd 1:0:0:0: [sda] Write Protect is off
[ 18.377435] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.383188] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.394169] sda: sda1 sda2
[ 18.397708] sd 1:0:0:0: [sda] Attached SCSI disk
[ 18.405629] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 18.454916] raid6: sse2x1 7449 MB/s
[ 18.475904] raid6: sse2x2 9058 MB/s
[ 18.496890] raid6: sse2x4 10648 MB/s
[ 18.517876] raid6: avx2x1 14433 MB/s
[ 18.539863] raid6: avx2x2 17074 MB/s
[ 18.561851] raid6: avx2x4 19464 MB/s
[ 18.567226] raid6: using algorithm avx2x4 (19464 MB/s)
[ 18.574167] raid6: using avx2x2 recovery algorithm
[ 18.581815] xor: automatically using best checksumming function:
[ 18.598831] avx : 22616.000 MB/sec
[ 18.619181] Btrfs loaded
[ 18.624763] BTRFS: device fsid 86a10be3-8e31-4041-a634-fd3ca735533e devid 1 transid 54 /dev/sda1
[ 18.937728] random: dd urandom read with 60 bits of entropy available

==> /tmp/lkp/stdout <==

==> /
[ 39.784386] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
tmp/lkp/stderr <
[ 41.491850] random: nonblocking pool is initialized
==

==> /tmp/lkp/std
[ 47.922628] e1000e: eth0 NIC Link is Down
[ 47.927359] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[ 47.941653] e1000e: EEE TX LPI TIMER: 00000011
[ 47.963992] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
Starting new kernel