[PATCH 1/2] drm/msm: Initial add eDP support in msm drm driver (V3)
From: Hai Li
Date: Fri Dec 12 2014 - 12:35:35 EST
This change adds a new eDP connector in msm drm driver. With this
change, eDP panel can work with msm platform under drm framework.
Signed-off-by: Hai Li <hali@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/Makefile | 6 +
drivers/gpu/drm/msm/edp/edp.c | 210 +++++
drivers/gpu/drm/msm/edp/edp.h | 84 ++
drivers/gpu/drm/msm/edp/edp_aux.c | 268 ++++++
drivers/gpu/drm/msm/edp/edp_bridge.c | 124 +++
drivers/gpu/drm/msm/edp/edp_connector.c | 161 ++++
drivers/gpu/drm/msm/edp/edp_ctrl.c | 1390 +++++++++++++++++++++++++++++++
drivers/gpu/drm/msm/edp/edp_phy.c | 106 +++
drivers/gpu/drm/msm/msm_drv.h | 6 +
9 files changed, 2355 insertions(+)
create mode 100644 drivers/gpu/drm/msm/edp/edp.c
create mode 100644 drivers/gpu/drm/msm/edp/edp.h
create mode 100644 drivers/gpu/drm/msm/edp/edp_aux.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_bridge.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_connector.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_ctrl.c
create mode 100644 drivers/gpu/drm/msm/edp/edp_phy.c
diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 143d988..e5464a0 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -16,6 +16,12 @@ msm-y := \
hdmi/hdmi_phy_8960.o \
hdmi/hdmi_phy_8x60.o \
hdmi/hdmi_phy_8x74.o \
+ edp/edp.o \
+ edp/edp_aux.o \
+ edp/edp_bridge.o \
+ edp/edp_connector.o \
+ edp/edp_ctrl.o \
+ edp/edp_phy.o \
mdp/mdp_format.o \
mdp/mdp_kms.o \
mdp/mdp4/mdp4_crtc.o \
diff --git a/drivers/gpu/drm/msm/edp/edp.c b/drivers/gpu/drm/msm/edp/edp.c
new file mode 100644
index 0000000..16b8984
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp.c
@@ -0,0 +1,210 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/of_irq.h>
+#include "edp.h"
+
+static irqreturn_t edp_irq(int irq, void *dev_id)
+{
+ struct msm_edp *edp = dev_id;
+
+ /* Process eDP irq */
+ return msm_edp_ctrl_irq(edp->ctrl);
+}
+
+static void edp_destroy(struct platform_device *pdev)
+{
+ struct msm_edp *edp = platform_get_drvdata(pdev);
+
+ if (!edp)
+ return;
+
+ if (edp->ctrl) {
+ msm_edp_ctrl_destroy(edp->ctrl);
+ edp->ctrl = NULL;
+ }
+
+ platform_set_drvdata(pdev, NULL);
+}
+
+/* construct eDP at bind/probe time, grab all the resources. */
+static struct msm_edp *edp_init(struct platform_device *pdev)
+{
+ struct msm_edp *edp = NULL;
+ int ret;
+
+ if (!pdev) {
+ pr_err("no eDP device\n");
+ ret = -ENXIO;
+ goto fail;
+ }
+
+ edp = devm_kzalloc(&pdev->dev, sizeof(*edp), GFP_KERNEL);
+ if (!edp) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+ DBG("eDP probed=%p", edp);
+
+ edp->pdev = pdev;
+ platform_set_drvdata(pdev, edp);
+
+ ret = msm_edp_ctrl_init(edp);
+ if (ret)
+ goto fail;
+
+ return edp;
+
+fail:
+ if (edp)
+ edp_destroy(pdev);
+
+ return ERR_PTR(ret);
+}
+
+static int edp_bind(struct device *dev, struct device *master, void *data)
+{
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct msm_drm_private *priv = drm->dev_private;
+ struct msm_edp *edp;
+
+ DBG("");
+ edp = edp_init(to_platform_device(dev));
+ if (IS_ERR(edp))
+ return PTR_ERR(edp);
+ priv->edp = edp;
+
+ return 0;
+}
+
+static void edp_unbind(struct device *dev, struct device *master, void *data)
+{
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct msm_drm_private *priv = drm->dev_private;
+
+ DBG("");
+ if (priv->edp) {
+ edp_destroy(to_platform_device(dev));
+ priv->edp = NULL;
+ }
+}
+
+static const struct component_ops edp_ops = {
+ .bind = edp_bind,
+ .unbind = edp_unbind,
+};
+
+static int edp_dev_probe(struct platform_device *pdev)
+{
+ DBG("");
+ return component_add(&pdev->dev, &edp_ops);
+}
+
+static int edp_dev_remove(struct platform_device *pdev)
+{
+ DBG("");
+ component_del(&pdev->dev, &edp_ops);
+ return 0;
+}
+
+static const struct of_device_id dt_match[] = {
+ { .compatible = "qcom,mdss-edp" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, dt_match);
+
+
+static struct platform_driver edp_driver = {
+ .probe = edp_dev_probe,
+ .remove = edp_dev_remove,
+ .driver = {
+ .name = "msm_edp",
+ .of_match_table = dt_match,
+ },
+};
+
+void __init msm_edp_register(void)
+{
+ DBG("");
+ platform_driver_register(&edp_driver);
+}
+
+void __exit msm_edp_unregister(void)
+{
+ DBG("");
+ platform_driver_unregister(&edp_driver);
+}
+
+/* Second part of initialization, the drm/kms level modeset_init */
+int msm_edp_modeset_init(struct msm_edp *edp, struct drm_device *dev,
+ struct drm_encoder *encoder)
+{
+ struct platform_device *pdev = edp->pdev;
+ struct msm_drm_private *priv = dev->dev_private;
+ int ret;
+
+ edp->encoder = encoder;
+ edp->dev = dev;
+
+ edp->bridge = msm_edp_bridge_init(edp);
+ if (IS_ERR(edp->bridge)) {
+ ret = PTR_ERR(edp->bridge);
+ dev_err(dev->dev, "failed to create eDP bridge: %d\n", ret);
+ edp->bridge = NULL;
+ goto fail;
+ }
+
+ edp->connector = msm_edp_connector_init(edp);
+ if (IS_ERR(edp->connector)) {
+ ret = PTR_ERR(edp->connector);
+ dev_err(dev->dev, "failed to create eDP connector: %d\n", ret);
+ edp->connector = NULL;
+ goto fail;
+ }
+
+ edp->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (edp->irq < 0) {
+ ret = edp->irq;
+ dev_err(dev->dev, "failed to get IRQ: %d\n", ret);
+ goto fail;
+ }
+
+ ret = devm_request_irq(&pdev->dev, edp->irq,
+ edp_irq, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "edp_isr", edp);
+ if (ret < 0) {
+ dev_err(dev->dev, "failed to request IRQ%u: %d\n",
+ edp->irq, ret);
+ goto fail;
+ }
+
+ encoder->bridge = edp->bridge;
+
+ priv->bridges[priv->num_bridges++] = edp->bridge;
+ priv->connectors[priv->num_connectors++] = edp->connector;
+
+ return 0;
+
+fail:
+ /* bridge/connector are normally destroyed by drm */
+ if (edp->bridge) {
+ edp->bridge->funcs->destroy(edp->bridge);
+ edp->bridge = NULL;
+ }
+ if (edp->connector) {
+ edp->connector->funcs->destroy(edp->connector);
+ edp->connector = NULL;
+ }
+
+ return ret;
+}
diff --git a/drivers/gpu/drm/msm/edp/edp.h b/drivers/gpu/drm/msm/edp/edp.h
new file mode 100644
index 0000000..062ec5a
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __EDP_CONNECTOR_H__
+#define __EDP_CONNECTOR_H__
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include "drm_crtc.h"
+#include "drm_dp_helper.h"
+#include "msm_drv.h"
+
+#define edp_read(offset) msm_readl((offset))
+#define edp_write(offset, data) msm_writel((data), (offset))
+
+struct edp_ctrl;
+struct edp_aux;
+struct edp_phy;
+
+struct msm_edp {
+ struct drm_device *dev;
+ struct platform_device *pdev;
+
+ struct drm_connector *connector;
+ struct drm_bridge *bridge;
+
+ /* the encoder we are hooked to (outside of eDP block) */
+ struct drm_encoder *encoder;
+
+ struct edp_ctrl *ctrl;
+
+ int irq;
+};
+
+/* eDP bridge */
+struct drm_bridge *msm_edp_bridge_init(struct msm_edp *edp);
+
+/* eDP connector */
+struct drm_connector *msm_edp_connector_init(struct msm_edp *edp);
+
+/* AUX */
+void *msm_edp_aux_init(struct device *dev, void __iomem *regbase,
+ struct drm_dp_aux **drm_aux);
+void msm_edp_aux_destroy(struct device *dev, struct edp_aux *aux);
+irqreturn_t msm_edp_aux_irq(struct edp_aux *aux, u32 isr);
+void msm_edp_aux_ctrl(struct edp_aux *aux, int enable);
+
+/* Phy */
+bool msm_edp_phy_ready(struct edp_phy *phy);
+void msm_edp_phy_ctrl(struct edp_phy *phy, int enable);
+void msm_edp_phy_vm_pe_init(struct edp_phy *phy);
+void msm_edp_phy_vm_pe_cfg(struct edp_phy *phy, u32 v0, u32 v1);
+void msm_edp_phy_lane_power_ctrl(struct edp_phy *phy, bool up, u32 max_lane);
+void *msm_edp_phy_init(struct device *dev, void __iomem *regbase);
+
+/* Ctrl */
+irqreturn_t msm_edp_ctrl_irq(struct edp_ctrl *ctrl);
+void msm_edp_ctrl_power(struct edp_ctrl *ctrl, bool on);
+int msm_edp_ctrl_init(struct msm_edp *edp);
+void msm_edp_ctrl_destroy(struct edp_ctrl *ctrl);
+bool msm_edp_ctrl_panel_connected(struct edp_ctrl *ctrl);
+int msm_edp_ctrl_get_panel_info(struct edp_ctrl *ctrl,
+ struct drm_connector *connector, struct edid **edid);
+int msm_edp_ctrl_timing_cfg(struct edp_ctrl *ctrl,
+ const struct drm_display_mode *mode,
+ const struct drm_display_info *info);
+/* @pixel_rate is in kHz */
+bool msm_edp_ctrl_pixel_clock_valid(struct edp_ctrl *ctrl,
+ u32 pixel_rate, u32 *pm, u32 *pn);
+
+#endif /* __EDP_CONNECTOR_H__ */
diff --git a/drivers/gpu/drm/msm/edp/edp_aux.c b/drivers/gpu/drm/msm/edp/edp_aux.c
new file mode 100644
index 0000000..769b74f
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_aux.c
@@ -0,0 +1,268 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "edp.h"
+#include "edp.xml.h"
+
+#define AUX_CMD_FIFO_LEN 144
+#define AUX_CMD_NATIVE_MAX 16
+#define AUX_CMD_I2C_MAX 128
+
+#define EDP_INTR_AUX_I2C_ERR \
+ (EDP_INTERRUPT_REG_1_WRONG_ADDR | EDP_INTERRUPT_REG_1_TIMEOUT | \
+ EDP_INTERRUPT_REG_1_NACK_DEFER | EDP_INTERRUPT_REG_1_WRONG_DATA_CNT | \
+ EDP_INTERRUPT_REG_1_I2C_NACK | EDP_INTERRUPT_REG_1_I2C_DEFER)
+#define EDP_INTR_TRANS_STATUS \
+ (EDP_INTERRUPT_REG_1_AUX_I2C_DONE | EDP_INTR_AUX_I2C_ERR)
+
+struct edp_aux {
+ void __iomem *base;
+ bool msg_err;
+
+ struct completion msg_comp;
+
+ /* To prevent the message transaction routine from reentry. */
+ struct mutex msg_mutex;
+
+ struct drm_dp_aux drm_aux;
+};
+#define to_edp_aux(x) container_of(x, struct edp_aux, drm_aux)
+
+static int edp_msg_fifo_tx(struct edp_aux *aux, struct drm_dp_aux_msg *msg)
+{
+ u32 data[4];
+ u32 reg, len;
+ bool native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
+ bool read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+ u8 *msgdata = msg->buffer;
+ int i;
+
+ if (read)
+ len = 4;
+ else
+ len = msg->size + 4;
+
+ /*
+ * cmd fifo only has depth of 144 bytes
+ */
+ if (len > AUX_CMD_FIFO_LEN)
+ return -EINVAL;
+
+ /* Pack cmd and write to HW */
+ data[0] = (msg->address >> 16) & 0xf; /* addr[19:16] */
+ if (read)
+ data[0] |= BIT(4); /* R/W */
+
+ data[1] = (msg->address >> 8) & 0xff; /* addr[15:8] */
+ data[2] = msg->address & 0xff; /* addr[7:0] */
+ data[3] = (msg->size - 1) & 0xff; /* len[7:0] */
+
+ for (i = 0; i < len; i++) {
+ reg = (i < 4) ? data[i] : msgdata[i - 4];
+ reg = EDP_AUX_DATA_DATA(reg); /* index = 0, write */
+ if (i == 0)
+ reg |= EDP_AUX_DATA_INDEX_WRITE;
+ edp_write(aux->base + REG_EDP_AUX_DATA, reg);
+ }
+
+ reg = 0; /* Transaction number is always 1 */
+ if (!native) /* i2c */
+ reg |= EDP_AUX_TRANS_CTRL_I2C;
+
+ reg |= EDP_AUX_TRANS_CTRL_GO;
+ edp_write(aux->base + REG_EDP_AUX_TRANS_CTRL, reg);
+
+ return 0;
+}
+
+static int edp_msg_fifo_rx(struct edp_aux *aux, struct drm_dp_aux_msg *msg)
+{
+ u32 data;
+ u8 *dp;
+ int i;
+ u32 len = msg->size;
+
+ edp_write(aux->base + REG_EDP_AUX_DATA,
+ EDP_AUX_DATA_INDEX_WRITE | EDP_AUX_DATA_READ); /* index = 0 */
+
+ dp = msg->buffer;
+
+ /* discard first byte */
+ data = edp_read(aux->base + REG_EDP_AUX_DATA);
+ for (i = 0; i < len; i++) {
+ data = edp_read(aux->base + REG_EDP_AUX_DATA);
+ dp[i] = (u8)((data >> 8) & 0xff);
+ }
+
+ return 0;
+}
+
+/*
+ * This function does the real job to process an AUX transaction.
+ * It will call msm_edp_aux_ctrl() function to reset the AUX channel,
+ * if the waiting is timeout.
+ * The caller who triggers the transaction should avoid the
+ * msm_edp_aux_ctrl() running concurrently in other threads, i.e.
+ * start transaction only when AUX channel is fully enabled.
+ */
+ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux, struct drm_dp_aux_msg *msg)
+{
+ struct edp_aux *aux = to_edp_aux(drm_aux);
+ ssize_t ret;
+ bool native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
+ bool read = msg->request & (DP_AUX_I2C_READ & DP_AUX_NATIVE_READ);
+
+ /* Ignore address only message */
+ if ((msg->size == 0) || (msg->buffer == NULL)) {
+ msg->reply = native ?
+ DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+ return msg->size;
+ }
+
+ /* msg sanity check */
+ if ((native && (msg->size > AUX_CMD_NATIVE_MAX)) ||
+ (msg->size > AUX_CMD_I2C_MAX)) {
+ pr_err("%s: invalid msg: size(%d), request(%x)\n",
+ __func__, msg->size, msg->request);
+ return -EINVAL;
+ }
+
+ mutex_lock(&aux->msg_mutex);
+
+ aux->msg_err = false;
+ reinit_completion(&aux->msg_comp);
+
+ ret = edp_msg_fifo_tx(aux, msg);
+ if (ret < 0)
+ goto unlock_exit;
+
+ DBG("wait_for_completion");
+ ret = wait_for_completion_timeout(&aux->msg_comp, 300);
+ if (ret <= 0) {
+ /*
+ * Clear GO and reset AUX channel
+ * to cancel the current transaction.
+ */
+ edp_write(aux->base + REG_EDP_AUX_TRANS_CTRL, 0);
+ msm_edp_aux_ctrl(aux, 1);
+ pr_err("%s: aux timeout, %d\n", __func__, ret);
+ goto unlock_exit;
+ }
+ DBG("completion");
+
+ if (!aux->msg_err) {
+ if (read) {
+ ret = edp_msg_fifo_rx(aux, msg);
+ if (ret < 0)
+ goto unlock_exit;
+ }
+
+ msg->reply = native ?
+ DP_AUX_NATIVE_REPLY_ACK : DP_AUX_I2C_REPLY_ACK;
+ } else {
+ /* Reply defer to retry */
+ msg->reply = native ?
+ DP_AUX_NATIVE_REPLY_DEFER : DP_AUX_I2C_REPLY_DEFER;
+ /*
+ * The sleep time in caller is not long enough to make sure
+ * our H/W completes transactions. Add more defer time here.
+ */
+ msleep(100);
+ }
+
+ /* Return requested size for success or retry */
+ ret = msg->size;
+
+unlock_exit:
+ mutex_unlock(&aux->msg_mutex);
+ return ret;
+}
+
+void *msm_edp_aux_init(struct device *dev, void __iomem *regbase,
+ struct drm_dp_aux **drm_aux)
+{
+ struct edp_aux *aux = NULL;
+ int ret;
+
+ DBG("");
+ aux = devm_kzalloc(dev, sizeof(*aux), GFP_KERNEL);
+ if (!aux)
+ return NULL;
+
+ aux->base = regbase;
+ mutex_init(&aux->msg_mutex);
+ init_completion(&aux->msg_comp);
+
+ aux->drm_aux.name = "msm_edp_aux";
+ aux->drm_aux.dev = dev;
+ aux->drm_aux.transfer = edp_aux_transfer;
+ ret = drm_dp_aux_register(&aux->drm_aux);
+ if (ret) {
+ pr_err("%s: failed to register drm aux: %d\n", __func__, ret);
+ mutex_destroy(&aux->msg_mutex);
+ }
+
+ if (drm_aux && aux)
+ *drm_aux = &aux->drm_aux;
+
+ return aux;
+}
+
+void msm_edp_aux_destroy(struct device *dev, struct edp_aux *aux)
+{
+ if (aux) {
+ drm_dp_aux_unregister(&aux->drm_aux);
+ mutex_destroy(&aux->msg_mutex);
+ }
+}
+
+irqreturn_t msm_edp_aux_irq(struct edp_aux *aux, u32 isr)
+{
+ if (isr & EDP_INTR_TRANS_STATUS) {
+ DBG("isr=%x", isr);
+ edp_write(aux->base + REG_EDP_AUX_TRANS_CTRL, 0);
+
+ if (isr & EDP_INTR_AUX_I2C_ERR)
+ aux->msg_err = true;
+ else
+ aux->msg_err = false;
+
+ complete(&aux->msg_comp);
+ }
+
+ return IRQ_HANDLED;
+}
+
+void msm_edp_aux_ctrl(struct edp_aux *aux, int enable)
+{
+ u32 data;
+
+ DBG("enable=%d", enable);
+ data = edp_read(aux->base + REG_EDP_AUX_CTRL);
+
+ if (enable) {
+ data |= EDP_AUX_CTRL_RESET;
+ edp_write(aux->base + REG_EDP_AUX_CTRL, data);
+ /* Make sure full reset */
+ wmb();
+ usleep_range(500, 1000);
+
+ data &= ~EDP_AUX_CTRL_RESET;
+ data |= EDP_AUX_CTRL_ENABLE;
+ edp_write(aux->base + REG_EDP_AUX_CTRL, data);
+ } else {
+ data &= ~EDP_AUX_CTRL_ENABLE;
+ edp_write(aux->base + REG_EDP_AUX_CTRL, data);
+ }
+}
+
diff --git a/drivers/gpu/drm/msm/edp/edp_bridge.c b/drivers/gpu/drm/msm/edp/edp_bridge.c
new file mode 100644
index 0000000..f2ff677
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_bridge.c
@@ -0,0 +1,124 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "edp.h"
+
+struct edp_bridge {
+ struct drm_bridge base;
+ struct msm_edp *edp;
+};
+#define to_edp_bridge(x) container_of(x, struct edp_bridge, base)
+
+static void edp_bridge_destroy(struct drm_bridge *bridge)
+{
+ struct edp_bridge *edp_bridge = to_edp_bridge(bridge);
+
+ DBG("");
+ drm_bridge_cleanup(bridge);
+ kfree(edp_bridge);
+}
+
+static void edp_bridge_pre_enable(struct drm_bridge *bridge)
+{
+ struct edp_bridge *edp_bridge = to_edp_bridge(bridge);
+ struct msm_edp *edp = edp_bridge->edp;
+
+ DBG("");
+ msm_edp_ctrl_power(edp->ctrl, true);
+}
+
+static void edp_bridge_enable(struct drm_bridge *bridge)
+{
+ DBG("");
+}
+
+static void edp_bridge_disable(struct drm_bridge *bridge)
+{
+ DBG("");
+}
+
+static void edp_bridge_post_disable(struct drm_bridge *bridge)
+{
+ struct edp_bridge *edp_bridge = to_edp_bridge(bridge);
+ struct msm_edp *edp = edp_bridge->edp;
+
+ DBG("");
+ msm_edp_ctrl_power(edp->ctrl, false);
+}
+
+static void edp_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct drm_device *dev = bridge->dev;
+ struct drm_connector *connector;
+ struct edp_bridge *edp_bridge = to_edp_bridge(bridge);
+ struct msm_edp *edp = edp_bridge->edp;
+
+ DBG("set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
+ mode->base.id, mode->name,
+ mode->vrefresh, mode->clock,
+ mode->hdisplay, mode->hsync_start,
+ mode->hsync_end, mode->htotal,
+ mode->vdisplay, mode->vsync_start,
+ mode->vsync_end, mode->vtotal,
+ mode->type, mode->flags);
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ if ((connector->encoder != NULL) &&
+ (connector->encoder->bridge == bridge)) {
+ msm_edp_ctrl_timing_cfg(edp->ctrl,
+ adjusted_mode, &connector->display_info);
+ break;
+ }
+ }
+}
+
+static const struct drm_bridge_funcs edp_bridge_funcs = {
+ .pre_enable = edp_bridge_pre_enable,
+ .enable = edp_bridge_enable,
+ .disable = edp_bridge_disable,
+ .post_disable = edp_bridge_post_disable,
+ .mode_set = edp_bridge_mode_set,
+ .destroy = edp_bridge_destroy,
+};
+
+/* initialize bridge */
+struct drm_bridge *msm_edp_bridge_init(struct msm_edp *edp)
+{
+ struct drm_bridge *bridge = NULL;
+ struct edp_bridge *edp_bridge;
+ int ret;
+
+ edp_bridge = kzalloc(sizeof(*edp_bridge), GFP_KERNEL);
+ if (!edp_bridge) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ edp_bridge->edp = edp;
+
+ bridge = &edp_bridge->base;
+
+ ret = drm_bridge_init(edp->dev, bridge, &edp_bridge_funcs);
+ if (ret)
+ goto fail;
+
+ return bridge;
+
+fail:
+ if (bridge)
+ edp_bridge_destroy(bridge);
+
+ return ERR_PTR(ret);
+}
diff --git a/drivers/gpu/drm/msm/edp/edp_connector.c b/drivers/gpu/drm/msm/edp/edp_connector.c
new file mode 100644
index 0000000..d23181a
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_connector.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "drm/drm_edid.h"
+#include "msm_kms.h"
+#include "edp.h"
+
+struct edp_connector {
+ struct drm_connector base;
+ struct msm_edp *edp;
+};
+#define to_edp_connector(x) container_of(x, struct edp_connector, base)
+
+static enum drm_connector_status edp_connector_detect(
+ struct drm_connector *connector, bool force)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+ struct msm_edp *edp = edp_connector->edp;
+
+ DBG("");
+ return msm_edp_ctrl_panel_connected(edp->ctrl) ?
+ connector_status_connected : connector_status_disconnected;
+}
+
+static void edp_connector_destroy(struct drm_connector *connector)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+
+ DBG("");
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+
+ kfree(edp_connector);
+}
+
+static int edp_connector_get_modes(struct drm_connector *connector)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+ struct msm_edp *edp = edp_connector->edp;
+
+ struct edid *drm_edid = NULL;
+ int ret = 0;
+
+ DBG("");
+ ret = msm_edp_ctrl_get_panel_info(edp->ctrl, connector, &drm_edid);
+ if (ret)
+ return ret;
+
+ drm_mode_connector_update_edid_property(connector, drm_edid);
+ if (drm_edid)
+ ret = drm_add_edid_modes(connector, drm_edid);
+
+ return ret;
+}
+
+static int edp_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+ struct msm_edp *edp = edp_connector->edp;
+ struct msm_drm_private *priv = connector->dev->dev_private;
+ struct msm_kms *kms = priv->kms;
+ long actual, requested;
+
+ requested = 1000 * mode->clock;
+ actual = kms->funcs->round_pixclk(kms,
+ requested, edp_connector->edp->encoder);
+
+ DBG("requested=%ld, actual=%ld", requested, actual);
+ if (actual != requested)
+ return MODE_CLOCK_RANGE;
+
+ if (!msm_edp_ctrl_pixel_clock_valid(
+ edp->ctrl, mode->clock, NULL, NULL))
+ return MODE_CLOCK_RANGE;
+
+ /* Invalidate all modes if color format is not supported */
+ if (connector->display_info.bpc > 8)
+ return MODE_BAD;
+
+ return MODE_OK;
+}
+
+static struct drm_encoder *
+edp_connector_best_encoder(struct drm_connector *connector)
+{
+ struct edp_connector *edp_connector = to_edp_connector(connector);
+
+ DBG("");
+ return edp_connector->edp->encoder;
+}
+
+static const struct drm_connector_funcs edp_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .detect = edp_connector_detect,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .destroy = edp_connector_destroy,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static const struct drm_connector_helper_funcs edp_connector_helper_funcs = {
+ .get_modes = edp_connector_get_modes,
+ .mode_valid = edp_connector_mode_valid,
+ .best_encoder = edp_connector_best_encoder,
+};
+
+/* initialize connector */
+struct drm_connector *msm_edp_connector_init(struct msm_edp *edp)
+{
+ struct drm_connector *connector = NULL;
+ struct edp_connector *edp_connector;
+ int ret;
+
+ edp_connector = kzalloc(sizeof(*edp_connector), GFP_KERNEL);
+ if (!edp_connector) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ edp_connector->edp = edp;
+
+ connector = &edp_connector->base;
+
+ ret = drm_connector_init(edp->dev, connector, &edp_connector_funcs,
+ DRM_MODE_CONNECTOR_eDP);
+ if (ret)
+ goto fail;
+
+ drm_connector_helper_add(connector, &edp_connector_helper_funcs);
+
+ /* We don't support HPD, so only poll status until connected. */
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+
+ /* Display driver doesn't support interlace now. */
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
+
+ ret = drm_connector_register(connector);
+ if (ret)
+ goto fail;
+
+ return connector;
+
+fail:
+ if (connector)
+ edp_connector_destroy(connector);
+
+ return ERR_PTR(ret);
+}
diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c
new file mode 100644
index 0000000..41370d5
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c
@@ -0,0 +1,1390 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include "drm_crtc.h"
+#include "drm_dp_helper.h"
+#include "drm_edid.h"
+#include "edp.h"
+#include "edp.xml.h"
+
+#define VDDA_MIN_UV 1800000 /* uV units */
+#define VDDA_MAX_UV 1800000 /* uV units */
+#define VDDA_UA_ON_LOAD 100000 /* uA units */
+#define VDDA_UA_OFF_LOAD 100 /* uA units */
+
+#define DPCD_LINK_VOLTAGE_MAX 4
+#define DPCD_LINK_PRE_EMPHASIS_MAX 4
+
+#define EDP_LINK_BW_MAX DP_LINK_BW_2_7
+
+/* Link training return value */
+#define EDP_TRAIN_FAIL -1
+#define EDP_TRAIN_SUCCESS 0
+#define EDP_TRAIN_RECONFIG 1
+
+#define EDP_CLK_MASK_AHB BIT(0)
+#define EDP_CLK_MASK_AUX BIT(1)
+#define EDP_CLK_MASK_LINK BIT(2)
+#define EDP_CLK_MASK_PIXEL BIT(3)
+#define EDP_CLK_MASK_MDP_CORE BIT(4)
+#define EDP_CLK_MASK_LINK_CHAN (EDP_CLK_MASK_LINK | EDP_CLK_MASK_PIXEL)
+#define EDP_CLK_MASK_AUX_CHAN \
+ (EDP_CLK_MASK_AHB | EDP_CLK_MASK_AUX | EDP_CLK_MASK_MDP_CORE)
+#define EDP_CLK_MASK_ALL (EDP_CLK_MASK_AUX_CHAN | EDP_CLK_MASK_LINK_CHAN)
+
+#define EDP_BACKLIGHT_MAX 255
+
+#define EDP_INTR_STATUS1 \
+ (EDP_INTERRUPT_REG_1_HPD | EDP_INTERRUPT_REG_1_AUX_I2C_DONE | \
+ EDP_INTERRUPT_REG_1_WRONG_ADDR | EDP_INTERRUPT_REG_1_TIMEOUT | \
+ EDP_INTERRUPT_REG_1_NACK_DEFER | EDP_INTERRUPT_REG_1_WRONG_DATA_CNT | \
+ EDP_INTERRUPT_REG_1_I2C_NACK | EDP_INTERRUPT_REG_1_I2C_DEFER | \
+ EDP_INTERRUPT_REG_1_PLL_UNLOCK | EDP_INTERRUPT_REG_1_AUX_ERROR)
+#define EDP_INTR_MASK1 (EDP_INTR_STATUS1 << 2)
+#define EDP_INTR_STATUS2 \
+ (EDP_INTERRUPT_REG_2_READY_FOR_VIDEO | \
+ EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT | \
+ EDP_INTERRUPT_REG_2_FRAME_END | EDP_INTERRUPT_REG_2_CRC_UPDATED)
+#define EDP_INTR_MASK2 (EDP_INTR_STATUS2 << 2)
+
+struct edp_ctrl {
+ struct platform_device *pdev;
+
+ void __iomem *base;
+
+ /* regulators */
+ struct regulator *vdda_vreg;
+ struct regulator *lvl_vreg;
+
+ /* clocks */
+ struct clk *aux_clk;
+ struct clk *pixel_clk;
+ struct clk *ahb_clk;
+ struct clk *link_clk;
+ struct clk *mdp_core_clk;
+
+ /* gpios */
+ struct gpio_desc *panel_en_gpio;
+ struct gpio_desc *panel_hpd_gpio;
+
+ /* completion and mutex */
+ struct completion idle_comp;
+ struct mutex dev_mutex; /* To protect device power status */
+
+ /* work queue */
+ struct work_struct on_work;
+ struct work_struct off_work;
+ struct workqueue_struct *workqueue;
+
+ /* Interrupt register lock */
+ spinlock_t irq_lock;
+
+ bool edp_connected;
+ bool power_on;
+
+ /* edid raw data */
+ struct edid *edid;
+
+ struct drm_dp_link dp_link;
+ struct drm_dp_aux *drm_aux;
+
+ /* dpcd raw data */
+ u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+ /* Link status */
+ u8 link_rate;
+ u8 lane_cnt;
+ u8 v_level;
+ u8 p_level;
+
+ /* Timing status */
+ u8 interlaced;
+ u32 pixel_rate; /* in kHz */
+ u32 color_depth;
+
+ struct edp_aux *aux;
+ struct edp_phy *phy;
+};
+
+struct edp_pixel_clk_div {
+ u32 rate; /* in kHz */
+ u32 m;
+ u32 n;
+};
+
+#define EDP_PIXEL_CLK_NUM 8
+static const struct edp_pixel_clk_div clk_divs[2][EDP_PIXEL_CLK_NUM] = {
+ { /* Link clock = 162MHz, source clock = 810MHz */
+ {119000, 31, 211}, /* WSXGA+ 1680x1050@60Hz CVT */
+ {130250, 32, 199}, /* UXGA 1600x1200@60Hz CVT */
+ {148500, 11, 60}, /* FHD 1920x1080@60Hz */
+ {154000, 50, 263}, /* WUXGA 1920x1200@60Hz CVT */
+ {209250, 31, 120}, /* QXGA 2048x1536@60Hz CVT */
+ {268500, 119, 359}, /* WQXGA 2560x1600@60Hz CVT */
+ {138530, 33, 193}, /* AUO B116HAN03.0 Panel */
+ {141400, 48, 275}, /* AUO B133HTN01.2 Panel */
+ },
+ { /* Link clock = 270MHz, source clock = 675MHz */
+ {119000, 52, 295}, /* WSXGA+ 1680x1050@60Hz CVT */
+ {130250, 11, 57}, /* UXGA 1600x1200@60Hz CVT */
+ {148500, 11, 50}, /* FHD 1920x1080@60Hz */
+ {154000, 47, 206}, /* WUXGA 1920x1200@60Hz CVT */
+ {209250, 31, 100}, /* QXGA 2048x1536@60Hz CVT */
+ {268500, 107, 269}, /* WQXGA 2560x1600@60Hz CVT */
+ {138530, 63, 307}, /* AUO B116HAN03.0 Panel */
+ {141400, 53, 253}, /* AUO B133HTN01.2 Panel */
+ },
+};
+
+static int edp_clk_init(struct edp_ctrl *ctrl)
+{
+ struct device *dev = &ctrl->pdev->dev;
+ int ret;
+
+ ctrl->aux_clk = devm_clk_get(dev, "core_clk");
+ if (IS_ERR(ctrl->aux_clk)) {
+ ret = PTR_ERR(ctrl->aux_clk);
+ pr_err("%s: Can't find aux_clk, %d\n", __func__, ret);
+ ctrl->aux_clk = NULL;
+ return ret;
+ }
+
+ ctrl->pixel_clk = devm_clk_get(dev, "pixel_clk");
+ if (IS_ERR(ctrl->pixel_clk)) {
+ ret = PTR_ERR(ctrl->pixel_clk);
+ pr_err("%s: Can't find pixel_clk, %d\n", __func__, ret);
+ ctrl->pixel_clk = NULL;
+ return ret;
+ }
+
+ ctrl->ahb_clk = devm_clk_get(dev, "iface_clk");
+ if (IS_ERR(ctrl->ahb_clk)) {
+ ret = PTR_ERR(ctrl->ahb_clk);
+ pr_err("%s: Can't find ahb_clk, %d\n", __func__, ret);
+ ctrl->ahb_clk = NULL;
+ return ret;
+ }
+
+ ctrl->link_clk = devm_clk_get(dev, "link_clk");
+ if (IS_ERR(ctrl->link_clk)) {
+ ret = PTR_ERR(ctrl->link_clk);
+ pr_err("%s: Can't find link_clk, %d\n", __func__, ret);
+ ctrl->link_clk = NULL;
+ return ret;
+ }
+
+ /* need mdp core clock to receive irq */
+ ctrl->mdp_core_clk = devm_clk_get(dev, "mdp_core_clk");
+ if (IS_ERR(ctrl->mdp_core_clk)) {
+ ret = PTR_ERR(ctrl->mdp_core_clk);
+ pr_err("%s: Can't find mdp_core_clk, %d\n", __func__, ret);
+ ctrl->mdp_core_clk = NULL;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int edp_clk_enable(struct edp_ctrl *ctrl, u32 clk_mask)
+{
+ int ret;
+
+ DBG("mask=%x", clk_mask);
+ /* ahb_clk should be enabled first */
+ if (clk_mask & EDP_CLK_MASK_AHB) {
+ ret = clk_prepare_enable(ctrl->ahb_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable ahb clk\n", __func__);
+ goto f0;
+ }
+ }
+ if (clk_mask & EDP_CLK_MASK_AUX) {
+ ret = clk_set_rate(ctrl->aux_clk, 19200000);
+ if (ret) {
+ pr_err("%s: Failed to set rate aux clk\n", __func__);
+ goto f1;
+ }
+ ret = clk_prepare_enable(ctrl->aux_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable aux clk\n", __func__);
+ goto f1;
+ }
+ }
+ /* Need to set rate and enable link_clk prior to pixel_clk */
+ if (clk_mask & EDP_CLK_MASK_LINK) {
+ DBG("edp->link_clk, set_rate %ld",
+ (unsigned long)ctrl->link_rate * 27000000);
+ ret = clk_set_rate(ctrl->link_clk,
+ (unsigned long)ctrl->link_rate * 27000000);
+ if (ret) {
+ pr_err("%s: Failed to set rate to link clk\n",
+ __func__);
+ goto f2;
+ }
+
+ ret = clk_prepare_enable(ctrl->link_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable link clk\n", __func__);
+ goto f2;
+ }
+ }
+ if (clk_mask & EDP_CLK_MASK_PIXEL) {
+ DBG("edp->pixel_clk, set_rate %ld",
+ (unsigned long)ctrl->pixel_rate * 1000);
+ ret = clk_set_rate(ctrl->pixel_clk,
+ (unsigned long)ctrl->pixel_rate * 1000);
+ if (ret) {
+ pr_err("%s: Failed to set rate to pixel clk\n",
+ __func__);
+ goto f3;
+ }
+
+ ret = clk_prepare_enable(ctrl->pixel_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable pixel clk\n", __func__);
+ goto f3;
+ }
+ }
+ if (clk_mask & EDP_CLK_MASK_MDP_CORE) {
+ ret = clk_prepare_enable(ctrl->mdp_core_clk);
+ if (ret) {
+ pr_err("%s: Failed to enable mdp core clk\n", __func__);
+ goto f4;
+ }
+ }
+
+ return 0;
+
+f4:
+ if (clk_mask & EDP_CLK_MASK_PIXEL)
+ clk_disable_unprepare(ctrl->pixel_clk);
+f3:
+ if (clk_mask & EDP_CLK_MASK_LINK)
+ clk_disable_unprepare(ctrl->link_clk);
+f2:
+ if (clk_mask & EDP_CLK_MASK_AUX)
+ clk_disable_unprepare(ctrl->aux_clk);
+f1:
+ if (clk_mask & EDP_CLK_MASK_AHB)
+ clk_disable_unprepare(ctrl->ahb_clk);
+f0:
+ return ret;
+}
+
+static void edp_clk_disable(struct edp_ctrl *ctrl, u32 clk_mask)
+{
+ if (clk_mask & EDP_CLK_MASK_MDP_CORE)
+ clk_disable_unprepare(ctrl->mdp_core_clk);
+ if (clk_mask & EDP_CLK_MASK_PIXEL)
+ clk_disable_unprepare(ctrl->pixel_clk);
+ if (clk_mask & EDP_CLK_MASK_LINK)
+ clk_disable_unprepare(ctrl->link_clk);
+ if (clk_mask & EDP_CLK_MASK_AUX)
+ clk_disable_unprepare(ctrl->aux_clk);
+ if (clk_mask & EDP_CLK_MASK_AHB)
+ clk_disable_unprepare(ctrl->ahb_clk);
+}
+
+static int edp_regulator_init(struct edp_ctrl *ctrl)
+{
+ struct device *dev = &ctrl->pdev->dev;
+
+ DBG("");
+ ctrl->vdda_vreg = devm_regulator_get(dev, "vdda");
+ if (IS_ERR(ctrl->vdda_vreg)) {
+ pr_err("%s: Could not get vdda reg, ret = %ld\n", __func__,
+ PTR_ERR(ctrl->vdda_vreg));
+ ctrl->vdda_vreg = NULL;
+ return PTR_ERR(ctrl->vdda_vreg);
+ }
+ ctrl->lvl_vreg = devm_regulator_get(dev, "lvl-vdd");
+ if (IS_ERR(ctrl->lvl_vreg)) {
+ pr_err("Could not get lvl-vdd reg, %ld",
+ PTR_ERR(ctrl->lvl_vreg));
+ ctrl->lvl_vreg = NULL;
+ return PTR_ERR(ctrl->lvl_vreg);
+ }
+
+ return 0;
+}
+
+static int edp_regulator_enable(struct edp_ctrl *ctrl)
+{
+ int ret;
+
+ ret = regulator_set_voltage(ctrl->vdda_vreg, VDDA_MIN_UV, VDDA_MAX_UV);
+ if (ret) {
+ pr_err("%s:vdda_vreg set_voltage failed, %d\n", __func__, ret);
+ goto vdda_set_fail;
+ }
+
+ ret = regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_ON_LOAD);
+ if (ret < 0) {
+ pr_err("%s: vdda_vreg set regulator mode failed.\n", __func__);
+ goto vdda_set_fail;
+ }
+
+ ret = regulator_enable(ctrl->vdda_vreg);
+ if (ret) {
+ pr_err("%s: Failed to enable vdda_vreg regulator.\n", __func__);
+ goto vdda_enable_fail;
+ }
+
+ ret = regulator_enable(ctrl->lvl_vreg);
+ if (ret) {
+ pr_err("Failed to enable lvl-vdd reg regulator, %d", ret);
+ goto lvl_enable_fail;
+ }
+
+ DBG("exit");
+ return 0;
+
+lvl_enable_fail:
+ regulator_disable(ctrl->vdda_vreg);
+vdda_enable_fail:
+ regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
+vdda_set_fail:
+ return ret;
+}
+
+static void edp_regulator_disable(struct edp_ctrl *ctrl)
+{
+ regulator_disable(ctrl->lvl_vreg);
+ regulator_disable(ctrl->vdda_vreg);
+ regulator_set_optimum_mode(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
+}
+
+static int edp_gpio_config(struct edp_ctrl *ctrl)
+{
+ struct device *dev = &ctrl->pdev->dev;
+ int ret;
+
+ ctrl->panel_hpd_gpio = devm_gpiod_get(dev, "panel-hpd");
+ if (IS_ERR(ctrl->panel_hpd_gpio)) {
+ ret = PTR_ERR(ctrl->panel_hpd_gpio);
+ ctrl->panel_hpd_gpio = NULL;
+ pr_err("%s: cannot get panel-hpd-gpios, %d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = gpiod_direction_input(ctrl->panel_hpd_gpio);
+ if (ret) {
+ pr_err("%s: Set direction for hpd failed, %d\n", __func__, ret);
+ return ret;
+ }
+
+ ctrl->panel_en_gpio = devm_gpiod_get(dev, "panel-en");
+ if (IS_ERR(ctrl->panel_en_gpio)) {
+ ret = PTR_ERR(ctrl->panel_en_gpio);
+ ctrl->panel_en_gpio = NULL;
+ pr_err("%s: cannot get panel-en-gpios, %d\n", __func__, ret);
+ return ret;
+ }
+
+ ret = gpiod_direction_output(ctrl->panel_en_gpio, 0);
+ if (ret) {
+ pr_err("%s: Set direction for panel_en failed, %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ DBG("gpio on");
+
+ return 0;
+}
+
+static void edp_ctrl_irq_enable(struct edp_ctrl *ctrl, int enable)
+{
+ unsigned long flags;
+
+ DBG("%d", enable);
+ spin_lock_irqsave(&ctrl->irq_lock, flags);
+ if (enable) {
+ edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, EDP_INTR_MASK1);
+ edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, EDP_INTR_MASK2);
+ } else {
+ edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, 0x0);
+ edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, 0x0);
+ }
+ spin_unlock_irqrestore(&ctrl->irq_lock, flags);
+ DBG("exit");
+}
+
+static void edp_fill_link_cfg(struct edp_ctrl *ctrl)
+{
+ u32 prate;
+ u32 lrate;
+ u32 bpp;
+ u8 max_lane = ctrl->dp_link.num_lanes;
+ u8 lane;
+
+ prate = ctrl->pixel_rate;
+ bpp = ctrl->color_depth * 3;
+
+ /*
+ * By default, use the maximum link rate and minimum lane count,
+ * so that we can do rate down shift during link training.
+ */
+ ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
+
+ prate *= bpp;
+ prate /= 8; /* in kByte */
+
+ lrate = 270000; /* in kHz */
+ lrate *= ctrl->link_rate;
+ lrate /= 10; /* in kByte, 10 bits --> 8 bits */
+
+ for (lane = 1; lane <= max_lane; lane <<= 1) {
+ if (lrate >= prate)
+ break;
+ lrate <<= 1;
+ }
+
+ ctrl->lane_cnt = lane;
+ DBG("rate=%d lane=%d", ctrl->link_rate, ctrl->lane_cnt);
+}
+
+static int edp_sink_power_state(struct edp_ctrl *ctrl, u8 state)
+{
+ u8 s = state;
+
+ DBG("%d", s);
+
+ if (ctrl->dp_link.revision < 0x11)
+ return 0;
+
+ if (drm_dp_dpcd_write(ctrl->drm_aux, DP_SET_POWER, &s, 1) < 1) {
+ pr_err("%s: Set power state to panel failed\n", __func__);
+ return -ENOLINK;
+ }
+
+ return 0;
+}
+
+static void edp_config_ctrl(struct edp_ctrl *ctrl)
+{
+ u32 data;
+ enum edp_color_depth depth;
+
+ data = EDP_CONFIGURATION_CTRL_LANES(ctrl->lane_cnt - 1);
+
+ if (ctrl->dp_link.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
+ data |= EDP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
+
+ depth = EDP_6BIT;
+ if (ctrl->color_depth == 8)
+ depth = EDP_8BIT;
+
+ data |= EDP_CONFIGURATION_CTRL_COLOR(depth);
+
+ if (!ctrl->interlaced) /* progressive */
+ data |= EDP_CONFIGURATION_CTRL_PROGRESSIVE;
+
+ data |= (EDP_CONFIGURATION_CTRL_SYNC_CLK |
+ EDP_CONFIGURATION_CTRL_STATIC_MVID);
+
+ edp_write(ctrl->base + REG_EDP_CONFIGURATION_CTRL, data);
+}
+
+static void edp_state_ctrl(struct edp_ctrl *ctrl, u32 state)
+{
+ edp_write(ctrl->base + REG_EDP_STATE_CTRL, state);
+ /* Make sure H/W status is set */
+ wmb();
+}
+
+static int edp_lane_set_write(struct edp_ctrl *ctrl,
+ u8 voltage_level, u8 pre_emphasis_level)
+{
+ int i;
+ u8 buf[4];
+
+ if (voltage_level >= DPCD_LINK_VOLTAGE_MAX)
+ voltage_level |= 0x04;
+
+ if (pre_emphasis_level >= DPCD_LINK_PRE_EMPHASIS_MAX)
+ pre_emphasis_level |= 0x04;
+
+ pre_emphasis_level <<= 3;
+
+ for (i = 0; i < 4; i++)
+ buf[i] = voltage_level | pre_emphasis_level;
+
+ DBG("%s: p|v=0x%x", __func__, voltage_level | pre_emphasis_level);
+ if (drm_dp_dpcd_write(ctrl->drm_aux, 0x103, buf, 4) < 4) {
+ pr_err("%s: Set sw/pe to panel failed\n", __func__);
+ return -ENOLINK;
+ }
+
+ return 0;
+}
+
+static int edp_train_pattern_set_write(struct edp_ctrl *ctrl, u8 pattern)
+{
+ u8 p = pattern;
+
+ DBG("pattern=%x", p);
+ if (drm_dp_dpcd_write(ctrl->drm_aux,
+ DP_TRAINING_PATTERN_SET, &p, 1) < 1) {
+ pr_err("%s: Set training pattern to panel failed\n", __func__);
+ return -ENOLINK;
+ }
+
+ return 0;
+}
+
+static void edp_sink_train_set_adjust(struct edp_ctrl *ctrl,
+ const u8 *link_status)
+{
+ int i;
+ u8 max = 0;
+ u8 data;
+
+ /* use the max level across lanes */
+ for (i = 0; i < ctrl->lane_cnt; i++) {
+ data = drm_dp_get_adjust_request_voltage(link_status, i);
+ DBG("lane=%d req_voltage_swing=0x%x", i, data);
+ if (max < data)
+ max = data;
+ }
+
+ ctrl->v_level = max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
+
+ /* use the max level across lanes */
+ max = 0;
+ for (i = 0; i < ctrl->lane_cnt; i++) {
+ data = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
+ DBG("lane=%d req_pre_emphasis=0x%x", i, data);
+ if (max < data)
+ max = data;
+ }
+
+ ctrl->p_level = max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
+ DBG("v_level=%d, p_level=%d", ctrl->v_level, ctrl->p_level);
+}
+
+static void edp_host_train_set(struct edp_ctrl *ctrl, u32 train)
+{
+ int cnt = 10;
+ u32 data;
+ u32 shift = train - 1;
+
+ DBG("train=%d", train);
+
+ edp_state_ctrl(ctrl, EDP_STATE_CTRL_TRAIN_PATTERN_1 << shift);
+ while (--cnt) {
+ data = edp_read(ctrl->base + REG_EDP_MAINLINK_READY);
+ if (data & (EDP_MAINLINK_READY_TRAIN_PATTERN_1_READY << shift))
+ break;
+ }
+
+ if (cnt == 0)
+ pr_err("%s: set link_train=%d failed\n", __func__, train);
+}
+
+static const u8 vm_pre_emphasis[4][4] = {
+ {0x03, 0x06, 0x09, 0x0C}, /* pe0, 0 db */
+ {0x03, 0x06, 0x09, 0xFF}, /* pe1, 3.5 db */
+ {0x03, 0x06, 0xFF, 0xFF}, /* pe2, 6.0 db */
+ {0x03, 0xFF, 0xFF, 0xFF} /* pe3, 9.5 db */
+};
+
+/* voltage swing, 0.2v and 1.0v are not support */
+static const u8 vm_voltage_swing[4][4] = {
+ {0x14, 0x18, 0x1A, 0x1E}, /* sw0, 0.4v */
+ {0x18, 0x1A, 0x1E, 0xFF}, /* sw1, 0.6 v */
+ {0x1A, 0x1E, 0xFF, 0xFF}, /* sw1, 0.8 v */
+ {0x1E, 0xFF, 0xFF, 0xFF} /* sw1, 1.2 v, optional */
+};
+
+static int edp_voltage_pre_emphasise_set(struct edp_ctrl *ctrl)
+{
+ u32 value0;
+ u32 value1;
+
+ DBG("v=%d p=%d", ctrl->v_level, ctrl->p_level);
+
+ value0 = vm_pre_emphasis[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
+ value1 = vm_voltage_swing[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
+
+ /* Configure host and panel only if both values are allowed */
+ if (value0 != 0xFF && value1 != 0xFF) {
+ msm_edp_phy_vm_pe_cfg(ctrl->phy, value0, value1);
+ return edp_lane_set_write(ctrl, ctrl->v_level, ctrl->p_level);
+ }
+
+ return -EINVAL;
+}
+
+static int edp_start_link_train_1(struct edp_ctrl *ctrl)
+{
+ u8 link_status[DP_LINK_STATUS_SIZE];
+ u8 old_v_level;
+ int tries;
+ int ret;
+ int rlen;
+
+ DBG("");
+
+ edp_host_train_set(ctrl, DP_TRAINING_PATTERN_1);
+ ret = edp_voltage_pre_emphasise_set(ctrl);
+ if (ret)
+ return ret;
+ ret = edp_train_pattern_set_write(ctrl,
+ DP_TRAINING_PATTERN_1 | DP_RECOVERED_CLOCK_OUT_EN);
+ if (ret)
+ return ret;
+
+ tries = 0;
+ old_v_level = ctrl->v_level;
+ while (1) {
+ drm_dp_link_train_clock_recovery_delay(ctrl->dpcd);
+
+ rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
+ if (rlen < DP_LINK_STATUS_SIZE) {
+ pr_err("%s: read link status failed\n", __func__);
+ return -ENOLINK;
+ }
+ if (drm_dp_clock_recovery_ok(link_status, ctrl->lane_cnt)) {
+ ret = 0;
+ break;
+ }
+
+ if (ctrl->v_level == DPCD_LINK_VOLTAGE_MAX) {
+ ret = -1;
+ break;
+ }
+
+ if (old_v_level == ctrl->v_level) {
+ tries++;
+ if (tries >= 5) {
+ ret = -1;
+ break;
+ }
+ } else {
+ tries = 0;
+ old_v_level = ctrl->v_level;
+ }
+
+ edp_sink_train_set_adjust(ctrl, link_status);
+ ret = edp_voltage_pre_emphasise_set(ctrl);
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+static int edp_start_link_train_2(struct edp_ctrl *ctrl)
+{
+ u8 link_status[DP_LINK_STATUS_SIZE];
+ int tries = 0;
+ int ret;
+ int rlen;
+
+ DBG("");
+
+ edp_host_train_set(ctrl, DP_TRAINING_PATTERN_2);
+ ret = edp_voltage_pre_emphasise_set(ctrl);
+ if (ret)
+ return ret;
+
+ ret = edp_train_pattern_set_write(ctrl,
+ DP_TRAINING_PATTERN_2 | DP_RECOVERED_CLOCK_OUT_EN);
+ if (ret)
+ return ret;
+
+ while (1) {
+ drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
+
+ rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
+ if (rlen < DP_LINK_STATUS_SIZE) {
+ pr_err("%s: read link status failed\n", __func__);
+ return -ENOLINK;
+ }
+ if (drm_dp_channel_eq_ok(link_status, ctrl->lane_cnt)) {
+ ret = 0;
+ break;
+ }
+
+ tries++;
+ if (tries > 10) {
+ ret = -1;
+ break;
+ }
+
+ edp_sink_train_set_adjust(ctrl, link_status);
+ ret = edp_voltage_pre_emphasise_set(ctrl);
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+static int edp_link_rate_down_shift(struct edp_ctrl *ctrl)
+{
+ u32 prate, lrate, bpp;
+ u8 rate, lane, max_lane;
+ int changed = 0;
+
+ rate = ctrl->link_rate;
+ lane = ctrl->lane_cnt;
+ max_lane = ctrl->dp_link.num_lanes;
+
+ bpp = ctrl->color_depth * 3;
+ prate = ctrl->pixel_rate;
+ prate *= bpp;
+ prate /= 8; /* in kByte */
+
+ if (rate > DP_LINK_BW_1_62 && rate <= EDP_LINK_BW_MAX) {
+ rate -= 4; /* reduce rate */
+ changed++;
+ }
+
+ if (changed) {
+ if (lane >= 1 && lane < max_lane)
+ lane <<= 1; /* increase lane */
+
+ lrate = 270000; /* in kHz */
+ lrate *= rate;
+ lrate /= 10; /* kByte, 10 bits --> 8 bits */
+ lrate *= lane;
+
+ DBG("new lrate=%u prate=%u(kHz) rate=%d lane=%d p=%u b=%d",
+ lrate, prate, rate, lane,
+ ctrl->pixel_rate,
+ bpp);
+
+ if (lrate > prate) {
+ ctrl->link_rate = rate;
+ ctrl->lane_cnt = lane;
+ DBG("new rate=%d %d", rate, lane);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int edp_clear_training_pattern(struct edp_ctrl *ctrl)
+{
+ int ret;
+
+ ret = edp_train_pattern_set_write(ctrl, 0);
+
+ drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
+
+ return ret;
+}
+
+static int edp_do_link_train(struct edp_ctrl *ctrl)
+{
+ int ret;
+ struct drm_dp_link dp_link;
+
+ DBG("");
+ /*
+ * Set the current link rate and lane cnt to panel. They may have been
+ * adjusted and the values are different from them in DPCD CAP
+ */
+ dp_link.num_lanes = ctrl->lane_cnt;
+ dp_link.rate = drm_dp_bw_code_to_link_rate(ctrl->link_rate);
+ dp_link.capabilities = ctrl->dp_link.capabilities;
+ if (drm_dp_link_configure(ctrl->drm_aux, &dp_link) < 0)
+ return EDP_TRAIN_FAIL;
+
+ ctrl->v_level = 0; /* start from default level */
+ ctrl->p_level = 0;
+
+ edp_state_ctrl(ctrl, 0);
+ if (edp_clear_training_pattern(ctrl))
+ return EDP_TRAIN_FAIL;
+
+ ret = edp_start_link_train_1(ctrl);
+ if (ret < 0) {
+ if (edp_link_rate_down_shift(ctrl) == 0) {
+ DBG("link reconfig");
+ ret = EDP_TRAIN_RECONFIG;
+ goto clear;
+ } else {
+ pr_err("%s: Training 1 failed", __func__);
+ ret = EDP_TRAIN_FAIL;
+ goto clear;
+ }
+ }
+ DBG("Training 1 completed successfully");
+
+ edp_state_ctrl(ctrl, 0);
+ if (edp_clear_training_pattern(ctrl))
+ return EDP_TRAIN_FAIL;
+
+ ret = edp_start_link_train_2(ctrl);
+ if (ret < 0) {
+ if (edp_link_rate_down_shift(ctrl) == 0) {
+ DBG("link reconfig");
+ ret = EDP_TRAIN_RECONFIG;
+ goto clear;
+ } else {
+ pr_err("%s: Training 2 failed", __func__);
+ ret = EDP_TRAIN_FAIL;
+ goto clear;
+ }
+ }
+ DBG("Training 2 completed successfully");
+
+ edp_state_ctrl(ctrl, EDP_STATE_CTRL_SEND_VIDEO);
+clear:
+ edp_clear_training_pattern(ctrl);
+
+ return ret;
+}
+
+static void edp_clock_synchrous(struct edp_ctrl *ctrl, int sync)
+{
+ u32 data;
+ enum edp_color_depth depth;
+
+ data = edp_read(ctrl->base + REG_EDP_MISC1_MISC0);
+
+ if (sync)
+ data |= EDP_MISC1_MISC0_SYNC;
+ else
+ data &= ~EDP_MISC1_MISC0_SYNC;
+
+ /* only legacy rgb mode supported */
+ depth = EDP_6BIT; /* Default */
+ if (ctrl->color_depth == 8)
+ depth = EDP_8BIT;
+ else if (ctrl->color_depth == 10)
+ depth = EDP_10BIT;
+ else if (ctrl->color_depth == 12)
+ depth = EDP_12BIT;
+ else if (ctrl->color_depth == 16)
+ depth = EDP_16BIT;
+
+ data |= EDP_MISC1_MISC0_COLOR(depth);
+
+ edp_write(ctrl->base + REG_EDP_MISC1_MISC0, data);
+}
+
+static int edp_sw_mvid_nvid(struct edp_ctrl *ctrl, u32 m, u32 n)
+{
+ u32 n_multi, m_multi = 5;
+
+ if (ctrl->link_rate == DP_LINK_BW_1_62) {
+ n_multi = 1;
+ } else if (ctrl->link_rate == DP_LINK_BW_2_7) {
+ n_multi = 2;
+ } else {
+ pr_err("%s: Invalid link rate, %d\n", __func__,
+ ctrl->link_rate);
+ return -EINVAL;
+ }
+
+ edp_write(ctrl->base + REG_EDP_SOFTWARE_MVID, m * m_multi);
+ edp_write(ctrl->base + REG_EDP_SOFTWARE_NVID, n * n_multi);
+
+ return 0;
+}
+
+static void edp_mainlink_ctrl(struct edp_ctrl *ctrl, int enable)
+{
+ u32 data = 0;
+
+ edp_write(ctrl->base + REG_EDP_MAINLINK_CTRL, EDP_MAINLINK_CTRL_RESET);
+ /* Make sure fully reset */
+ wmb();
+ usleep_range(500, 1000);
+
+ if (enable)
+ data |= EDP_MAINLINK_CTRL_ENABLE;
+
+ edp_write(ctrl->base + REG_EDP_MAINLINK_CTRL, data);
+}
+
+static void edp_ctrl_phy_aux_enable(struct edp_ctrl *ctrl, int enable)
+{
+ if (enable) {
+ edp_regulator_enable(ctrl);
+ edp_clk_enable(ctrl, EDP_CLK_MASK_AUX_CHAN);
+ msm_edp_phy_ctrl(ctrl->phy, 1);
+ msm_edp_aux_ctrl(ctrl->aux, 1);
+ gpiod_set_value(ctrl->panel_en_gpio, 1);
+ } else {
+ gpiod_set_value(ctrl->panel_en_gpio, 0);
+ msm_edp_aux_ctrl(ctrl->aux, 0);
+ msm_edp_phy_ctrl(ctrl->phy, 0);
+ edp_clk_disable(ctrl, EDP_CLK_MASK_AUX_CHAN);
+ edp_regulator_disable(ctrl);
+ }
+}
+
+static void edp_ctrl_link_enable(struct edp_ctrl *ctrl, int enable)
+{
+ u32 m, n;
+
+ if (enable) {
+ /* Enable link channel clocks */
+ edp_clk_enable(ctrl, EDP_CLK_MASK_LINK_CHAN);
+
+ msm_edp_phy_lane_power_ctrl(ctrl->phy, true, ctrl->lane_cnt);
+
+ msm_edp_phy_vm_pe_init(ctrl->phy);
+
+ /* Make sure phy is programed */
+ wmb();
+ msm_edp_phy_ready(ctrl->phy);
+
+ edp_config_ctrl(ctrl);
+ msm_edp_ctrl_pixel_clock_valid(ctrl, ctrl->pixel_rate, &m, &n);
+ edp_sw_mvid_nvid(ctrl, m, n);
+ edp_mainlink_ctrl(ctrl, 1);
+ } else {
+ edp_mainlink_ctrl(ctrl, 0);
+
+ msm_edp_phy_lane_power_ctrl(ctrl->phy, false, 0);
+ edp_clk_disable(ctrl, EDP_CLK_MASK_LINK_CHAN);
+ }
+}
+
+static int edp_ctrl_training(struct edp_ctrl *ctrl)
+{
+ int ret;
+
+ /* Do link training only when power is on */
+ if (!ctrl->power_on)
+ return -EINVAL;
+
+train_start:
+ ret = edp_do_link_train(ctrl);
+ if (ret == EDP_TRAIN_RECONFIG) {
+ /* Re-configure main link */
+ edp_ctrl_irq_enable(ctrl, 0);
+ edp_ctrl_link_enable(ctrl, 0);
+ msm_edp_phy_ctrl(ctrl->phy, 0);
+
+ /* Make sure link is fully disabled */
+ wmb();
+ usleep_range(500, 1000);
+
+ msm_edp_phy_ctrl(ctrl->phy, 1);
+ edp_ctrl_link_enable(ctrl, 1);
+ edp_ctrl_irq_enable(ctrl, 1);
+ goto train_start;
+ }
+
+ return ret;
+}
+
+static void edp_ctrl_on_worker(struct work_struct *work)
+{
+ struct edp_ctrl *ctrl = container_of(
+ work, struct edp_ctrl, on_work);
+ int ret;
+
+ mutex_lock(&ctrl->dev_mutex);
+
+ if (ctrl->power_on) {
+ DBG("already on");
+ goto unlock_ret;
+ }
+
+ edp_ctrl_phy_aux_enable(ctrl, 1);
+ edp_ctrl_link_enable(ctrl, 1);
+
+ edp_ctrl_irq_enable(ctrl, 1);
+ ret = edp_sink_power_state(ctrl, DP_SET_POWER_D0);
+ if (ret)
+ goto fail;
+
+ ctrl->power_on = true;
+
+ /* Start link training */
+ ret = edp_ctrl_training(ctrl);
+ if (ret != EDP_TRAIN_SUCCESS)
+ goto fail;
+
+ DBG("DONE");
+ goto unlock_ret;
+
+fail:
+ edp_ctrl_irq_enable(ctrl, 0);
+ edp_ctrl_link_enable(ctrl, 0);
+ edp_ctrl_phy_aux_enable(ctrl, 0);
+ ctrl->power_on = false;
+unlock_ret:
+ mutex_unlock(&ctrl->dev_mutex);
+}
+
+static void edp_ctrl_off_worker(struct work_struct *work)
+{
+ struct edp_ctrl *ctrl = container_of(
+ work, struct edp_ctrl, off_work);
+ int ret;
+
+ mutex_lock(&ctrl->dev_mutex);
+
+ if (!ctrl->power_on) {
+ DBG("already off");
+ goto unlock_ret;
+ }
+
+ reinit_completion(&ctrl->idle_comp);
+ edp_state_ctrl(ctrl, EDP_STATE_CTRL_PUSH_IDLE);
+
+ ret = wait_for_completion_timeout(&ctrl->idle_comp,
+ msecs_to_jiffies(500));
+ if (ret <= 0)
+ DBG("%s: idle pattern timedout, %d\n",
+ __func__, ret);
+
+ edp_state_ctrl(ctrl, 0);
+
+ edp_sink_power_state(ctrl, DP_SET_POWER_D3);
+
+ edp_ctrl_irq_enable(ctrl, 0);
+
+ edp_ctrl_link_enable(ctrl, 0);
+
+ edp_ctrl_phy_aux_enable(ctrl, 0);
+
+ ctrl->power_on = false;
+
+unlock_ret:
+ mutex_unlock(&ctrl->dev_mutex);
+}
+
+irqreturn_t msm_edp_ctrl_irq(struct edp_ctrl *ctrl)
+{
+ u32 isr1, isr2, mask1, mask2;
+ u32 ack;
+
+ DBG("");
+ spin_lock(&ctrl->irq_lock);
+ isr1 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_1);
+ isr2 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_2);
+
+ mask1 = isr1 & EDP_INTR_MASK1;
+ mask2 = isr2 & EDP_INTR_MASK2;
+
+ isr1 &= ~mask1; /* remove masks bit */
+ isr2 &= ~mask2;
+
+ DBG("isr=%x mask=%x isr2=%x mask2=%x",
+ isr1, mask1, isr2, mask2);
+
+ ack = isr1 & EDP_INTR_STATUS1;
+ ack <<= 1; /* ack bits */
+ ack |= mask1;
+ edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, ack);
+
+ ack = isr2 & EDP_INTR_STATUS2;
+ ack <<= 1; /* ack bits */
+ ack |= mask2;
+ edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, ack);
+ spin_unlock(&ctrl->irq_lock);
+
+ if (isr1 & EDP_INTERRUPT_REG_1_HPD)
+ DBG("edp_hpd");
+
+ if (isr2 & EDP_INTERRUPT_REG_2_READY_FOR_VIDEO)
+ DBG("edp_video_ready");
+
+ if (isr2 & EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT) {
+ DBG("idle_patterns_sent");
+ complete(&ctrl->idle_comp);
+ }
+
+ msm_edp_aux_irq(ctrl->aux, isr1);
+
+ return IRQ_HANDLED;
+}
+
+void msm_edp_ctrl_power(struct edp_ctrl *ctrl, bool on)
+{
+ if (on)
+ queue_work(ctrl->workqueue, &ctrl->on_work);
+ else
+ queue_work(ctrl->workqueue, &ctrl->off_work);
+}
+
+int msm_edp_ctrl_init(struct msm_edp *edp)
+{
+ struct edp_ctrl *ctrl = NULL;
+ struct device *dev = &edp->pdev->dev;
+ int ret;
+
+ if (!edp) {
+ pr_err("%s: edp is NULL!\n", __func__);
+ return -EINVAL;
+ }
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ edp->ctrl = ctrl;
+ ctrl->pdev = edp->pdev;
+
+ ctrl->base = msm_ioremap(ctrl->pdev, "edp", "eDP");
+ if (IS_ERR(ctrl->base))
+ return PTR_ERR(ctrl->base);
+
+ /* Get regulator, clock, gpio, pwm */
+ ret = edp_regulator_init(ctrl);
+ if (ret) {
+ pr_err("%s:regulator init fail\n", __func__);
+ return ret;
+ }
+ ret = edp_clk_init(ctrl);
+ if (ret) {
+ pr_err("%s:clk init fail\n", __func__);
+ return ret;
+ }
+ ret = edp_gpio_config(ctrl);
+ if (ret) {
+ pr_err("%s:failed to configure GPIOs: %d", __func__, ret);
+ return ret;
+ }
+
+ /* Init aux and phy */
+ ctrl->aux = msm_edp_aux_init(dev, ctrl->base, &ctrl->drm_aux);
+ if (!ctrl->aux || !ctrl->drm_aux) {
+ pr_err("%s:failed to init aux\n", __func__);
+ return ret;
+ }
+
+ ctrl->phy = msm_edp_phy_init(dev, ctrl->base);
+ if (!ctrl->phy) {
+ pr_err("%s:failed to init phy\n", __func__);
+ goto err_destory_aux;
+ }
+
+ spin_lock_init(&ctrl->irq_lock);
+ mutex_init(&ctrl->dev_mutex);
+ init_completion(&ctrl->idle_comp);
+
+ /* setup workqueue */
+ ctrl->workqueue = alloc_ordered_workqueue("edp_drm_work", 0);
+ INIT_WORK(&ctrl->on_work, edp_ctrl_on_worker);
+ INIT_WORK(&ctrl->off_work, edp_ctrl_off_worker);
+
+ return 0;
+
+err_destory_aux:
+ msm_edp_aux_destroy(dev, ctrl->aux);
+ ctrl->aux = NULL;
+ return ret;
+}
+
+void msm_edp_ctrl_destroy(struct edp_ctrl *ctrl)
+{
+ if (!ctrl)
+ return;
+
+ if (ctrl->workqueue) {
+ flush_workqueue(ctrl->workqueue);
+ destroy_workqueue(ctrl->workqueue);
+ ctrl->workqueue = NULL;
+ }
+
+ if (ctrl->aux) {
+ msm_edp_aux_destroy(&ctrl->pdev->dev, ctrl->aux);
+ ctrl->aux = NULL;
+ }
+
+ kfree(ctrl->edid);
+ ctrl->edid = NULL;
+
+ mutex_destroy(&ctrl->dev_mutex);
+}
+
+bool msm_edp_ctrl_panel_connected(struct edp_ctrl *ctrl)
+{
+ mutex_lock(&ctrl->dev_mutex);
+ DBG("connect status = %d", ctrl->edp_connected);
+ if (ctrl->edp_connected) {
+ mutex_unlock(&ctrl->dev_mutex);
+ return true;
+ }
+
+ if (!ctrl->power_on) {
+ edp_ctrl_phy_aux_enable(ctrl, 1);
+ edp_ctrl_irq_enable(ctrl, 1);
+ }
+
+ if (drm_dp_dpcd_read(ctrl->drm_aux, DP_DPCD_REV, ctrl->dpcd,
+ DP_RECEIVER_CAP_SIZE) < DP_RECEIVER_CAP_SIZE) {
+ pr_err("%s: AUX channel is NOT ready\n", __func__);
+ memset(ctrl->dpcd, 0, DP_RECEIVER_CAP_SIZE);
+ } else {
+ ctrl->edp_connected = true;
+ }
+
+ if (!ctrl->power_on) {
+ edp_ctrl_irq_enable(ctrl, 0);
+ edp_ctrl_phy_aux_enable(ctrl, 0);
+ }
+
+ DBG("exit: connect status=%d", ctrl->edp_connected);
+
+ mutex_unlock(&ctrl->dev_mutex);
+
+ return ctrl->edp_connected;
+}
+
+int msm_edp_ctrl_get_panel_info(struct edp_ctrl *ctrl,
+ struct drm_connector *connector, struct edid **edid)
+{
+ int ret = 0;
+
+ mutex_lock(&ctrl->dev_mutex);
+
+ if (ctrl->edid) {
+ if (edid) {
+ DBG("Just return edid buffer");
+ *edid = ctrl->edid;
+ }
+ goto unlock_ret;
+ }
+
+ if (!ctrl->power_on) {
+ edp_ctrl_phy_aux_enable(ctrl, 1);
+ edp_ctrl_irq_enable(ctrl, 1);
+ }
+
+ ret = drm_dp_link_probe(ctrl->drm_aux, &ctrl->dp_link);
+ if (ret) {
+ pr_err("%s: read dpcd cap failed, %d\n", __func__, ret);
+ goto disable_ret;
+ }
+
+ /* Initialize link rate as panel max link rate */
+ ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
+
+ ctrl->edid = drm_get_edid(connector, &ctrl->drm_aux->ddc);
+ if (!ctrl->edid) {
+ pr_err("%s: edid read fail\n", __func__);
+ goto disable_ret;
+ }
+
+ if (edid)
+ *edid = ctrl->edid;
+
+disable_ret:
+ if (!ctrl->power_on) {
+ edp_ctrl_irq_enable(ctrl, 0);
+ edp_ctrl_phy_aux_enable(ctrl, 0);
+ }
+unlock_ret:
+ mutex_unlock(&ctrl->dev_mutex);
+ return ret;
+}
+
+int msm_edp_ctrl_timing_cfg(struct edp_ctrl *ctrl,
+ const struct drm_display_mode *mode,
+ const struct drm_display_info *info)
+{
+ u32 hstart_from_sync, vstart_from_sync;
+ u32 data;
+ int ret = 0;
+
+ mutex_lock(&ctrl->dev_mutex);
+ /*
+ * Need to keep color depth, pixel rate and
+ * interlaced information in ctrl context
+ */
+ ctrl->color_depth = info->bpc;
+ ctrl->pixel_rate = mode->clock;
+ ctrl->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+
+ /* Fill initial link config based on passed in timing */
+ edp_fill_link_cfg(ctrl);
+
+ if (edp_clk_enable(ctrl, EDP_CLK_MASK_AHB)) {
+ pr_err("%s, fail to prepare enable ahb clk\n", __func__);
+ ret = -EINVAL;
+ goto unlock_ret;
+ }
+ edp_clock_synchrous(ctrl, 1);
+
+ /* Configure eDP timing to HW */
+ edp_write(ctrl->base + REG_EDP_TOTAL_HOR_VER,
+ EDP_TOTAL_HOR_VER_HORIZ(mode->htotal) |
+ EDP_TOTAL_HOR_VER_VERT(mode->vtotal));
+
+ vstart_from_sync = mode->vtotal - mode->vsync_start;
+ hstart_from_sync = mode->htotal - mode->hsync_start;
+ edp_write(ctrl->base + REG_EDP_START_HOR_VER_FROM_SYNC,
+ EDP_START_HOR_VER_FROM_SYNC_HORIZ(hstart_from_sync) |
+ EDP_START_HOR_VER_FROM_SYNC_VERT(vstart_from_sync));
+
+ data = EDP_HSYNC_VSYNC_WIDTH_POLARITY_VERT(
+ mode->vsync_end - mode->vsync_start);
+ data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_HORIZ(
+ mode->hsync_end - mode->hsync_start);
+ if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+ data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_NVSYNC;
+ if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+ data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_NHSYNC;
+ edp_write(ctrl->base + REG_EDP_HSYNC_VSYNC_WIDTH_POLARITY, data);
+
+ edp_write(ctrl->base + REG_EDP_ACTIVE_HOR_VER,
+ EDP_ACTIVE_HOR_VER_HORIZ(mode->hdisplay) |
+ EDP_ACTIVE_HOR_VER_VERT(mode->vdisplay));
+
+ edp_clk_disable(ctrl, EDP_CLK_MASK_AHB);
+
+unlock_ret:
+ mutex_unlock(&ctrl->dev_mutex);
+ return ret;
+}
+
+bool msm_edp_ctrl_pixel_clock_valid(struct edp_ctrl *ctrl,
+ u32 pixel_rate, u32 *pm, u32 *pn)
+{
+ const struct edp_pixel_clk_div *divs;
+ u32 err = 1; /* 1% error tolerance */
+ u32 clk_err;
+ int i;
+
+ if (ctrl->link_rate == DP_LINK_BW_1_62) {
+ divs = clk_divs[0];
+ } else if (ctrl->link_rate == DP_LINK_BW_2_7) {
+ divs = clk_divs[1];
+ } else {
+ pr_err("%s: Invalid link rate,%d\n", __func__, ctrl->link_rate);
+ return false;
+ }
+
+ for (i = 0; i < EDP_PIXEL_CLK_NUM; i++) {
+ clk_err = abs(divs[i].rate - pixel_rate);
+ if ((divs[i].rate * err / 100) >= clk_err) {
+ if (pm)
+ *pm = divs[i].m;
+ if (pn)
+ *pn = divs[i].n;
+ return true;
+ }
+ }
+
+ DBG("pixel clock %d(kHz) not supported", pixel_rate);
+
+ return false;
+}
+
diff --git a/drivers/gpu/drm/msm/edp/edp_phy.c b/drivers/gpu/drm/msm/edp/edp_phy.c
new file mode 100644
index 0000000..2f35a9d
--- /dev/null
+++ b/drivers/gpu/drm/msm/edp/edp_phy.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "edp.h"
+#include "edp.xml.h"
+
+#define EDP_MAX_LANE 4
+
+struct edp_phy {
+ void __iomem *base;
+};
+
+bool msm_edp_phy_ready(struct edp_phy *phy)
+{
+ u32 status;
+ int cnt = 100;
+
+ while (--cnt) {
+ status = edp_read(phy->base +
+ REG_EDP_PHY_GLB_PHY_STATUS);
+ if (status & 0x01)
+ break;
+ usleep_range(500, 1000);
+ }
+
+ if (cnt == 0) {
+ pr_err("%s: PHY NOT ready\n", __func__);
+ return false;
+ } else {
+ return true;
+ }
+}
+
+void msm_edp_phy_ctrl(struct edp_phy *phy, int enable)
+{
+ DBG("enable=%d", enable);
+ if (enable) {
+ /* Reset */
+ edp_write(phy->base + REG_EDP_PHY_CTRL,
+ EDP_PHY_CTRL_SW_RESET | EDP_PHY_CTRL_SW_RESET_PLL);
+ /* Make sure fully reset */
+ wmb();
+ usleep_range(500, 1000);
+ edp_write(phy->base + REG_EDP_PHY_CTRL, 0x000);
+ edp_write(phy->base + REG_EDP_PHY_GLB_PD_CTL, 0x3f);
+ edp_write(phy->base + REG_EDP_PHY_GLB_CFG, 0x1);
+ } else {
+ edp_write(phy->base + REG_EDP_PHY_GLB_PD_CTL, 0xc0);
+ }
+}
+
+/* voltage mode and pre emphasis cfg */
+void msm_edp_phy_vm_pe_init(struct edp_phy *phy)
+{
+ edp_write(phy->base + REG_EDP_PHY_GLB_VM_CFG0, 0x3);
+ edp_write(phy->base + REG_EDP_PHY_GLB_VM_CFG1, 0x64);
+ edp_write(phy->base + REG_EDP_PHY_GLB_MISC9, 0x6c);
+}
+
+void msm_edp_phy_vm_pe_cfg(struct edp_phy *phy, u32 v0, u32 v1)
+{
+ edp_write(phy->base + REG_EDP_PHY_GLB_VM_CFG0, v0);
+ edp_write(phy->base + REG_EDP_PHY_GLB_VM_CFG1, v1);
+}
+
+void msm_edp_phy_lane_power_ctrl(struct edp_phy *phy, bool up, u32 max_lane)
+{
+ u32 i;
+ u32 data;
+
+ if (up)
+ data = 0; /* power up */
+ else
+ data = 0x7; /* power down */
+
+ for (i = 0; i < max_lane; i++)
+ edp_write(phy->base + REG_EDP_PHY_LN_PD_CTL(i) , data);
+
+ /* power down unused lane */
+ data = 0x7; /* power down */
+ for (i = max_lane; i < EDP_MAX_LANE; i++)
+ edp_write(phy->base + REG_EDP_PHY_LN_PD_CTL(i) , data);
+}
+
+void *msm_edp_phy_init(struct device *dev, void __iomem *regbase)
+{
+ struct edp_phy *phy = NULL;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return NULL;
+
+ phy->base = regbase;
+ return phy;
+}
+
diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h
index 1363038..3b25dd8 100644
--- a/drivers/gpu/drm/msm/msm_drv.h
+++ b/drivers/gpu/drm/msm/msm_drv.h
@@ -76,6 +76,12 @@ struct msm_drm_private {
*/
struct hdmi *hdmi;
+ /* eDP is for mdp5 only, but kms has not been created
+ * when edp_bind() and edp_init() are called. Here is the only
+ * place to keep the edp instance.
+ */
+ struct msm_edp *edp;
+
/* when we have more than one 'msm_gpu' these need to be an array: */
struct msm_gpu *gpu;
struct msm_file_private *lastctx;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/