Re: [PATCH v15 07/12] input: cyapa: add gen3 trackpad device read baseline function support

[Jeremiah Mahler]

Dudley,

On Mon, Dec 15, 2014 at 02:23:18PM +0800, Dudley Du wrote:
> Add read baseline function supported for gen3 trackpad device,
> it can be used through sysfs baseline interface.
> TEST=test on Chromebooks.
> 
> Signed-off-by: Dudley Du <dudley.dulixin@xxxxxxxxx>
> ---
>  drivers/input/mouse/cyapa_gen3.c | 71 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 71 insertions(+)
> 
> diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
> index 9851337..f42e008 100644
> --- a/drivers/input/mouse/cyapa_gen3.c
> +++ b/drivers/input/mouse/cyapa_gen3.c
> @@ -754,6 +754,75 @@ static int cyapa_gen3_do_fw_update(struct cyapa *cyapa,
>  	return 0;
>  }
>  
> +static ssize_t cyapa_gen3_show_baseline(struct device *dev,
> +				   struct device_attribute *attr, char *buf)
> +{
> +	struct cyapa *cyapa = dev_get_drvdata(dev);
> +	int max_baseline, min_baseline;
> +	int tries = 3;
Perhaps just declare tries here, then initialize and document it near
where it will be used.

+	int tries;

> +	int ret;
> +
> +	ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
> +	if (ret < 0) {
> +		dev_err(dev, "Error reading dev status. err = %d\n", ret);
> +		goto out;
> +	}
> +	if ((ret & CYAPA_DEV_NORMAL) != CYAPA_DEV_NORMAL) {
> +		dev_warn(dev, "Trackpad device is busy. device state = 0x%x\n",
> +			 ret);
> +		ret = -EAGAIN;
> +		goto out;
> +	}
> +
> +	ret = cyapa_write_byte(cyapa, CYAPA_CMD_SOFT_RESET,
> +			       OP_REPORT_BASELINE_MASK);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to send report baseline command. %d\n",
> +			ret);
> +		goto out;
> +	}
> +

+       tries = 3; /* try for 30 to 60 ms */
> +	do {
> +		usleep_range(10000, 20000);
> +
> +		ret = cyapa_read_byte(cyapa, CYAPA_CMD_DEV_STATUS);
> +		if (ret < 0) {
> +			dev_err(dev, "Error reading dev status. err = %d\n",
> +				ret);
> +			goto out;
> +		}
> +		if ((ret & CYAPA_DEV_NORMAL) == CYAPA_DEV_NORMAL)
> +			break;
> +	} while (--tries);
> +
> +	if (tries == 0) {
> +		dev_err(dev, "Device timed out going to Normal state.\n");
> +		ret = -ETIMEDOUT;
> +		goto out;
> +	}
> +
> +	ret = cyapa_read_byte(cyapa, CYAPA_CMD_MAX_BASELINE);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to read max baseline. err = %d\n", ret);
> +		goto out;
> +	}
> +	max_baseline = ret;
> +
> +	ret = cyapa_read_byte(cyapa, CYAPA_CMD_MIN_BASELINE);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to read min baseline. err = %d\n", ret);
> +		goto out;
> +	}
> +	min_baseline = ret;
> +
> +	dev_dbg(dev, "Baseline report successful. Max: %d Min: %d\n",
> +		max_baseline, min_baseline);
> +	ret = scnprintf(buf, PAGE_SIZE, "%d %d\n", max_baseline, min_baseline);
> +
> +out:
> +	return ret;
> +}
> +
>  /*
>   * cyapa_get_wait_time_for_pwr_cmd
>   *
> @@ -1067,6 +1136,8 @@ const struct cyapa_dev_ops cyapa_gen3_ops = {
>  	.update_fw = cyapa_gen3_do_fw_update,
>  	.bl_deactivate = cyapa_gen3_bl_deactivate,
>  
> +	.show_baseline = cyapa_gen3_show_baseline,
> +
>  	.state_parse = cyapa_gen3_state_parse,
>  	.operational_check = cyapa_gen3_do_operational_check,
>  
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
- Jeremiah Mahler
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/