[PATCH 0/3] Add support for Fujitsu USB host controller

[Sneeker Yeh]

These patches add support for EHCI and XHCI compliant Host controller found
on Fujitsu Socs, and are based on
http://www.spinics.net/lists/arm-kernel/msg385573.html

First patch is EHCI platform glue driver. Patch 2 introduces Fujitsu
Specific Glue layer in Synopsis DesignWare USB3 IP driver. Patch 3
introduces a quirk with device disconnection management necessary for IPs
using the Synopsys Designware dwc3 core. It solves a problem where without
the quirk, that host controller will die after a usb device is disconnected
from port of root hub, which happened in Synopsis core with Fujitsu
config-free usb phy integrated.

Successfully tested on Fujitsu mb86s7x board.

Sneeker Yeh (3):
  usb: host: f_usb20ho: add support for Fujitsu ehci/ohci USB 2.0 host
    controller
  usb: dwc3: add Fujitsu Specific Glue layer
  usb: dwc3: add a quirk for device disconnection issue in Synopsis
    dwc3 core

 .../devicetree/bindings/usb/fujitsu-dwc3.txt       |   25 ++
 .../devicetree/bindings/usb/fujitsu-ehci.txt       |   22 ++
 drivers/usb/dwc3/Kconfig                           |   11 +
 drivers/usb/dwc3/Makefile                          |    1 +
 drivers/usb/dwc3/dwc3-mb86s70.c                    |  194 +++++++++++++
 drivers/usb/host/Kconfig                           |   11 +
 drivers/usb/host/Makefile                          |    1 +
 drivers/usb/host/f_usb20ho_hcd.c                   |  306 ++++++++++++++++++++
 drivers/usb/host/f_usb20ho_hcd.h                   |   35 +++
 drivers/usb/host/xhci-hub.c                        |    4 +
 drivers/usb/host/xhci-plat.c                       |    5 +
 drivers/usb/host/xhci.c                            |   29 ++
 drivers/usb/host/xhci.h                            |    7 +
 13 files changed, 651 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/fujitsu-dwc3.txt
 create mode 100644 Documentation/devicetree/bindings/usb/fujitsu-ehci.txt
 create mode 100644 drivers/usb/dwc3/dwc3-mb86s70.c
 create mode 100644 drivers/usb/host/f_usb20ho_hcd.c
 create mode 100644 drivers/usb/host/f_usb20ho_hcd.h

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/