[PATCH] spi: qup: Add SPI_CPOL configuration support

[Ivan T. Ivanov]

Device support SPI_CPOL, but driver have missed to add
support for this configuration.

Signed-off-by: Ivan T. Ivanov <iivanov@xxxxxxxxxx>
---
 drivers/spi/spi-qup.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
index 390ed71..1c3329c 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -337,7 +337,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
 static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 {
 	struct spi_qup *controller = spi_master_get_devdata(spi->master);
-	u32 config, iomode, mode;
+	u32 config, iomode, mode, control;
 	int ret, n_words, w_size;
 
 	if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
@@ -392,6 +392,15 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
 
 	writel_relaxed(iomode, controller->base + QUP_IO_M_MODES);
 
+	control = readl_relaxed(controller->base + SPI_IO_CONTROL);
+
+	if (spi->mode & SPI_CPOL)
+		control |= SPI_IO_C_CLK_IDLE_HIGH;
+	else
+		control &= ~SPI_IO_C_CLK_IDLE_HIGH;
+
+	writel_relaxed(control, controller->base + SPI_IO_CONTROL);
+
 	config = readl_relaxed(controller->base + SPI_CONFIG);
 
 	if (spi->mode & SPI_LOOP)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/