Re: [BUG, linux-next] spawn PID 1 without CLONE_FS, wireless inop

From: Jeremiah Mahler
Date: Tue Dec 16 2014 - 09:46:23 EST

Al Viro,

On Tue, Dec 16, 2014 at 02:25:42PM +0000, Al Viro wrote:
> On Tue, Dec 16, 2014 at 06:09:52AM -0800, Jeremiah Mahler wrote:
> > > ramdisk_execute_command = NULL;
> > > prepare_namespace();
> > > + {
> > > + /* HACK */
> > > + struct path old, new;
> > > + get_fs_root(current->fs, &new);
> > > + get_fs_root(&init_fs, &old);
> > > + chroot_fs_refs(&old, &new);
> > > + path_put(&old);
> > > + path_put(&new);
> > > + }
> > > }
> > >
> > > /*
> >
> > I tested the bad commit with your patch applied but it made no
> > difference, the wireless is still down.
>
> Interesting... What happens if you move that added piece (i.e. call of
> chroot_fs_refs()) just after that if, instead of the end of the body of
> the if?
>
> > Not sure if it helps, but the dmesg is included below. There are errors
> > about not being able to load the firmware that look interesting.
>
> Errors about not being able to load the firmware clearly indicate that we
> have an attempt to load it (from a kernel thread of some sort, e.g.
> workqueue worker) getting failing with ENOENT. So we have init_fs stuck
> behind, presumably still on initramfs under the overmounting rootfs.

Here is how I changed the code.

diff --git a/init/main.c b/init/main.c
index 36c29d6..961a8fa 100644
--- a/init/main.c
+++ b/init/main.c
@@ -1026,16 +1026,17 @@ static noinline void __init kernel_init_freeable(void)
if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
ramdisk_execute_command = NULL;
prepare_namespace();
- {
- /* HACK */
- struct path old, new;
- get_fs_root(current->fs, &new);
- get_fs_root(&init_fs, &old);
- chroot_fs_refs(&old, &new);
- path_put(&old);
- path_put(&new);
- }
}
+ {
+ /* HACK */
+ struct path old, new;
+ get_fs_root(current->fs, &new);
+ get_fs_root(&init_fs, &old);
+ chroot_fs_refs(&old, &new);
+ path_put(&old);
+ path_put(&new);
+ }
+

/*
* Ok, we have completed the initial bootup, and


And it still behaves the same. Below is the dmesg output.


[ 0.000000] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.0-rc6+ (jeri@hudson) (gcc version 4.9.2 (Debian 4.9.2-7) ) #204 SMP Tue Dec 16 06:35:15 PST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.18.0-rc6+ root=UUID=ce693de1-b8f1-4176-9dda-e3afdbf43a6f ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000ced48fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ced49000-0x00000000dae9efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dae9f000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 3443CTO/3443CTO, BIOS G6ET59WW (2.03 ) 09/11/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x11e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask FE0000000 write-back
[ 0.000000] 7 base 11F000000 mask FFF000000 uncachable
[ 0.000000] 8 base 11E800000 mask FFF800000 uncachable
[ 0.000000] 9 base 11E600000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xced49 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b18000, 0x01b18fff] PGTABLE
[ 0.000000] BRK [0x01b19000, 0x01b19fff] PGTABLE
[ 0.000000] BRK [0x01b1a000, 0x01b1afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11e400000-0x11e5fffff]
[ 0.000000] [mem 0x11e400000-0x11e5fffff] page 2M
[ 0.000000] BRK [0x01b1b000, 0x01b1bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11e3fffff]
[ 0.000000] [mem 0x11c000000-0x11e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff]
[ 0.000000] [mem 0x100000000-0x11bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b1c000, 0x01b1cfff] PGTABLE
[ 0.000000] BRK [0x01b1d000, 0x01b1dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xced48fff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xcebfffff] page 2M
[ 0.000000] [mem 0xcec00000-0xced48fff] page 4k
[ 0.000000] RAMDISK: [mem 0x35368000-0x369abfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000DAFFE170 0000CC (v01 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: FACP 0x00000000DAFE7000 00010C (v05 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DAFE9000 00FB6A (v01 LENOVO TP-G6 00002030 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000DAF5A000 000040
[ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 LENOVO TP-G6 00002030 PTL 00000001)
[ 0.000000] ACPI: TCPA 0x00000000DAFFC000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 0x00000000DAFE5000 000038 (v01 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000DAFE4000 000098 (v01 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DAFE3000 00003C (v01 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: ECDT 0x00000000DAFE2000 000052 (v01 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DAFE1000 000064 (v01 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: ASF! 0x00000000DAFE8000 0000A5 (v32 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFE0000 00003E (v01 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFDF000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 0x00000000DAFDE000 000055 (v03 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DAFDD000 000C1A (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFDC000 000A7E (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: DMAR 0x00000000DAFDB000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: UEFI 0x00000000DAFDA000 0002A6 (v01 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DAFD9000 000379 (v01 LENOVO AoacTabl 00001000 INTL 20061109)
[ 0.000000] ACPI: DBG2 0x00000000DAFD8000 0000B4 (v00 LENOVO TP-G6 00002030 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11e5f8000-0x11e5fcfff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011a000000-ffff88011d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x11e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xced48fff]
[ 0.000000] node 0: [mem 0x100000000-0x11e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x11e5fffff]
[ 0.000000] On node 0 totalpages: 970980
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11520 pages used for memmap
[ 0.000000] DMA32 zone: 842568 pages, LIFO batch:31
[ 0.000000] Normal zone: 1701 pages used for memmap
[ 0.000000] Normal zone: 124416 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xced49000-0xdae9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdae9f000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdafff000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88011e200000 s83648 r8192 d31040 u262144
[ 0.000000] pcpu-alloc: s83648 r8192 d31040 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 957682
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.0-rc6+ root=UUID=ce693de1-b8f1-4176-9dda-e3afdbf43a6f ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3726868K/3883920K available (5319K kernel code, 1043K rwdata, 1816K rodata, 1212K init, 880K bss, 157052K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.291 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.58 BogoMIPS (lpj=9977164)
[ 0.000048] pid_max: default: 32768 minimum: 301
[ 0.000058] ACPI: Core revision 20140926
[ 0.016123] ACPI: All ACPI Tables successfully acquired
[ 0.017154] Security Framework initialized
[ 0.017163] AppArmor: AppArmor disabled by boot time parameter
[ 0.017164] Yama: becoming mindful.
[ 0.017483] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018771] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.019351] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019359] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019622] Initializing cgroup subsys devices
[ 0.019626] Initializing cgroup subsys freezer
[ 0.019629] Initializing cgroup subsys net_cls
[ 0.019632] Initializing cgroup subsys blkio
[ 0.019634] Initializing cgroup subsys perf_event
[ 0.019638] Initializing cgroup subsys net_prio
[ 0.019671] CPU: Physical Processor ID: 0
[ 0.019672] CPU: Processor Core ID: 0
[ 0.019678] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.020166] mce: CPU supports 7 MCE banks
[ 0.020179] CPU0: Thermal monitoring enabled (TM1)
[ 0.020189] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.020323] Freeing SMP alternatives memory: 20K (ffffffff81a35000 - ffffffff81a3a000)
[ 0.021371] ftrace: allocating 21491 entries in 84 pages
[ 0.032662] dmar: Host address width 36
[ 0.032664] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.032671] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.032673] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.032677] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.032679] dmar: RMRR base: 0x000000da3ba000 end: 0x000000da3d0fff
[ 0.032680] dmar: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[ 0.032755] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.032757] HPET id 0 under DRHD base 0xfed91000
[ 0.032758] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.032936] Enabled IRQ remapping in x2apic mode
[ 0.032937] Enabling x2apic
[ 0.032938] Enabled x2apic
[ 0.032946] Switched APIC routing to cluster x2apic.
[ 0.033430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073159] smpboot: CPU0: Intel(R) Core(TM) i7-3667U CPU @ 2.00GHz (fam: 06, model: 3a, stepping: 09)
[ 0.073171] TSC deadline timer enabled
[ 0.073200] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.073225] ... version: 3
[ 0.073226] ... bit width: 48
[ 0.073227] ... generic registers: 4
[ 0.073228] ... value mask: 0000ffffffffffff
[ 0.073229] ... max period: 0000ffffffffffff
[ 0.073230] ... fixed-purpose events: 3
[ 0.073231] ... event mask: 000000070000000f
[ 0.074871] x86: Booting SMP configuration:
[ 0.074874] .... node #0, CPUs: #1
[ 0.088665] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088780] #2
[ 0.100185] CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.102959] #3
[ 0.116542] x86: Booted up 1 node, 4 CPUs
[ 0.116545] smpboot: Total of 4 processors activated (19954.32 BogoMIPS)
[ 0.121333] devtmpfs: initialized
[ 0.125441] PM: Registering ACPI NVS region [mem 0xdae9f000-0xdaf9efff] (1048576 bytes)
[ 0.126579] pinctrl core: initialized pinctrl subsystem
[ 0.126706] NET: Registered protocol family 16
[ 0.137132] cpuidle: using governor ladder
[ 0.146933] cpuidle: using governor menu
[ 0.147007] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.147009] ACPI: bus type PCI registered
[ 0.147011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.147219] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.147222] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.147316] PCI: Using configuration type 1 for base access
[ 0.157682] ACPI: Added _OSI(Module Device)
[ 0.157684] ACPI: Added _OSI(Processor Device)
[ 0.157686] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.157687] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.159513] ACPI : EC: EC description table is found, configuring boot EC
[ 0.165042] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.225998] ACPI: Dynamic OEM Table Load:
[ 0.226017] ACPI: SSDT 0xFFFF88011901D000 000A01 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.241636] ACPI: Dynamic OEM Table Load:
[ 0.241652] ACPI: SSDT 0xFFFF8801190A0C00 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.251237] ACPI: Dynamic OEM Table Load:
[ 0.251251] ACPI: SSDT 0xFFFF880119060E00 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.262137] ACPI: Interpreter enabled
[ 0.262145] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.262150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.262166] ACPI: (supports S0 S3 S4 S5)
[ 0.262168] ACPI: Using IOAPIC for interrupt routing
[ 0.262198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.277877] ACPI: Power Resource [PUBS] (on)
[ 0.278597] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[ 0.279663] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
[ 0.282794] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.282899] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.283002] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.283101] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.283181] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.283281] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.283382] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.283483] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.283595] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.283601] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.283740] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.283802] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.283805] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.283807] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.283809] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.284004] PCI host bridge to bus 0000:00
[ 0.284007] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.284010] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.284012] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.284014] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.284016] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfebfffff]
[ 0.284018] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff]
[ 0.284027] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.284131] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.284144] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.284151] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.284156] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.284278] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.284304] pci 0000:00:14.0: reg 0x10: [mem 0xf1500000-0xf150ffff 64bit]
[ 0.284385] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.284423] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.284484] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.284512] pci 0000:00:16.0: reg 0x10: [mem 0xf1515000-0xf151500f 64bit]
[ 0.284598] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.284689] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[ 0.284711] pci 0000:00:16.3: reg 0x10: [io 0x4090-0x4097]
[ 0.284722] pci 0000:00:16.3: reg 0x14: [mem 0xf151b000-0xf151bfff]
[ 0.284893] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.284918] pci 0000:00:1a.0: reg 0x10: [mem 0xf151a000-0xf151a3ff]
[ 0.285019] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.285057] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.285119] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.285138] pci 0000:00:1b.0: reg 0x10: [mem 0xf1510000-0xf1513fff 64bit]
[ 0.285224] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.285269] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.285329] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.285479] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.285585] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.285728] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.285776] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.285848] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.285873] pci 0000:00:1d.0: reg 0x10: [mem 0xf1519000-0xf15193ff]
[ 0.285975] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.286014] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.286072] pci 0000:00:1f.0: [8086:1e56] type 00 class 0x060100
[ 0.286265] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.286288] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.286298] pci 0000:00:1f.2: reg 0x14: [io 0x409c-0x409f]
[ 0.286307] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.286317] pci 0000:00:1f.2: reg 0x1c: [io 0x4098-0x409b]
[ 0.286326] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.286335] pci 0000:00:1f.2: reg 0x24: [mem 0xf1518000-0xf15187ff]
[ 0.286388] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.286473] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.286492] pci 0000:00:1f.3: reg 0x10: [mem 0xf1514000-0xf15140ff 64bit]
[ 0.286515] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.286847] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
[ 0.286872] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.286900] pci 0000:02:00.0: reg 0x10: [mem 0xf0d00000-0xf0d000ff]
[ 0.287146] pci 0000:02:00.0: supports D1 D2
[ 0.287148] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.297760] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.297765] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.297771] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.297780] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.298038] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
[ 0.298240] pci 0000:03:00.0: reg 0x10: [mem 0xf0c00000-0xf0c01fff 64bit]
[ 0.299050] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.309605] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.309615] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.310967] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.311043] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.311173] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.311175] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.311179] vgaarb: loaded
[ 0.311180] vgaarb: bridge control possible 0000:00:02.0
[ 0.311256] PCI: Using ACPI for IRQ routing
[ 0.312991] PCI: pci_cache_line_size set to 64 bytes
[ 0.313346] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.313348] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.313350] e820: reserve RAM buffer [mem 0xced49000-0xcfffffff]
[ 0.313352] e820: reserve RAM buffer [mem 0x11e600000-0x11fffffff]
[ 0.313530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.313537] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.316577] Switched to clocksource hpet
[ 0.324114] pnp: PnP ACPI init
[ 0.324638] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.324641] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.324643] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.324645] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.324647] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.324650] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.324652] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.324654] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.324656] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.324658] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.324661] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.324663] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.324665] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.324667] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.324670] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.324672] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.324674] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.324678] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.324782] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[ 0.324808] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 0.324810] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.324812] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.324815] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.324817] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.324820] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.324822] system 00:01: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.324825] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.324827] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.324829] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.324831] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.324834] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.324836] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.324911] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.324952] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[ 0.324989] pnp 00:04: Plug and Play ACPI device, IDs LEN0030 PNP0f13 (active)
[ 0.325046] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.325462] pnp: PnP ACPI: found 6 devices
[ 0.333034] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.333043] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.333050] pci 0000:00:1c.0: bridge window [mem 0xf0d00000-0xf14fffff]
[ 0.333056] pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.333065] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.333072] pci 0000:00:1c.1: bridge window [mem 0xf0c00000-0xf0cfffff]
[ 0.333085] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.333087] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.333089] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.333091] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.333093] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.333095] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.333097] pci_bus 0000:02: resource 1 [mem 0xf0d00000-0xf14fffff]
[ 0.333099] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.333101] pci_bus 0000:03: resource 1 [mem 0xf0c00000-0xf0cfffff]
[ 0.333176] NET: Registered protocol family 2
[ 0.333409] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.333538] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.333806] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.333824] TCP: reno registered
[ 0.333841] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.333904] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[ 0.334037] NET: Registered protocol family 1
[ 0.334054] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.334595] PCI: CLS 64 bytes, default 64
[ 0.334646] Unpacking initramfs...
[ 0.805861] Freeing initrd memory: 22800K (ffff880035368000 - ffff8800369ac000)
[ 0.805901] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.805904] software IO TLB [mem 0xcad49000-0xced49000] (64MB) mapped at [ffff8800cad49000-ffff8800ced48fff]
[ 0.806191] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.806328] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.806337] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.806344] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.806355] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.806433] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 0.806831] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.806900] audit: initializing netlink subsys (disabled)
[ 0.806922] audit: type=2000 audit(1418715362.796:1): initialized
[ 0.807405] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.807431] zpool: loaded
[ 0.807433] zbud: loaded
[ 0.807628] VFS: Disk quotas dquot_6.5.2
[ 0.807654] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.807727] msgmni has been set to 7323
[ 0.808229] alg: No test for stdrng (krng)
[ 0.808277] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.808333] io scheduler noop registered
[ 0.808338] io scheduler deadline registered
[ 0.808362] io scheduler cfq registered (default)
[ 0.808768] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.808790] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.808850] intel_idle: MWAIT substates: 0x21120
[ 0.808852] intel_idle: v0.4 model 0x3A
[ 0.808853] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.809168] GHES: HEST is not enabled!
[ 0.809267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.830064] serial 0000:00:16.3: ttyS0 at I/O 0x4090 (irq = 19, base_baud = 115200) is a 16550A
[ 0.830264] Linux agpgart interface v0.103
[ 0.830407] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.832176] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.832181] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.832325] mousedev: PS/2 mouse device common for all mice
[ 0.832387] rtc_cmos 00:02: RTC can wake from S4
[ 0.832562] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.832601] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.832614] Intel P-state driver initializing.
[ 0.832974] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.833855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.834839] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@xxxxxxx>
[ 0.834842] AMD IOMMUv2 functionality not available on this system
[ 0.835083] TCP: cubic registered
[ 0.835231] NET: Registered protocol family 10
[ 0.835809] mip6: Mobile IPv6
[ 0.835819] NET: Registered protocol family 17
[ 0.835835] mpls_gso: MPLS GSO support
[ 0.836926] registered taskstats version 1
[ 0.838496] rtc_cmos 00:02: setting system clock to 2014-12-16 07:36:03 UTC (1418715363)
[ 0.840844] Freeing unused kernel memory: 1212K (ffffffff81906000 - ffffffff81a35000)
[ 0.840848] Write protecting the kernel read-only data: 8192k
[ 0.845236] Freeing unused kernel memory: 812K (ffff880001535000 - ffff880001600000)
[ 0.846491] Freeing unused kernel memory: 232K (ffff8800017c6000 - ffff880001800000)
[ 0.867779] systemd-udevd[73]: starting version 215
[ 0.868797] random: systemd-udevd urandom read with 4 bits of entropy available
[ 0.904293] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.904300] ACPI: Thermal Zone [THM0] (46 C)
[ 0.905530] sdhci: Secure Digital Host Controller Interface driver
[ 0.905534] sdhci: Copyright(c) Pierre Ossman
[ 0.906613] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 7)
[ 0.907295] sdhci-pci 0000:02:00.0: No vmmc regulator found
[ 0.907300] sdhci-pci 0000:02:00.0: No vqmmc regulator found
[ 0.908647] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.910019] SCSI subsystem initialized
[ 0.912940] libata version 3.00 loaded.
[ 0.915694] ahci 0000:00:1f.2: version 3.0
[ 0.915910] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 0.915993] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.916000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.923046] scsi host0: ahci
[ 0.923809] scsi host1: ahci
[ 0.924017] scsi host2: ahci
[ 0.924501] scsi host3: ahci
[ 0.924732] scsi host4: ahci
[ 0.925004] scsi host5: ahci
[ 0.925161] ata1: SATA max UDMA/133 abar m2048@0xf1518000 port 0xf1518100 irq 26
[ 0.925165] ata2: DUMMY
[ 0.925167] ata3: DUMMY
[ 0.925169] ata4: DUMMY
[ 0.925171] ata5: DUMMY
[ 0.925182] ata6: DUMMY
[ 1.241787] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.242521] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.242531] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.246401] ata1.00: ATA-8: SanDisk SD5SG2256G1052E, 10.02.01, max UDMA/133
[ 1.246407] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.247240] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.247248] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.248312] ata1.00: configured for UDMA/133
[ 1.248641] scsi 0:0:0:0: Direct-Access ATA SanDisk SD5SG225 2.01 PQ: 0 ANSI: 5
[ 1.254360] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.254681] sd 0:0:0:0: [sda] Write Protect is off
[ 1.254690] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.254761] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.256146] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.257650] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.259155] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.315152] PM: Starting manual resume from disk
[ 1.353674] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 1.565056] systemd[1]: RTC configured in localtime, applying delta of -480 minutes to system time.
[ 1.782871] systemd[1]: Cannot add dependency job for unit slcand.service, ignoring: Unit slcand.service failed to load: No such file or directory.
[ 1.806294] tsc: Refined TSC clocksource calibration: 2494.342 MHz
[ 1.822382] fuse init (API version 7.23)
[ 1.826717] loop: module loaded
[ 1.863662] systemd-udevd[199]: starting version 215
[ 1.961019] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,discard
[ 2.094531] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.094652] ACPI: Lid Switch [LID]
[ 2.094713] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 2.094718] ACPI: Sleep Button [SLPB]
[ 2.094803] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.094807] ACPI: Power Button [PWRF]
[ 2.100462] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\_SB_.PCI0.LPC_.PMIO) (20140926/utaddress-258)
[ 2.100467] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.100471] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[ 2.100473] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.100474] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[ 2.100476] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.100477] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[ 2.100480] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.100480] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.119433] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
[ 2.124039] ACPI: AC Adapter [AC] (on-line)
[ 2.124667] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.133227] ACPI: Battery Slot [BAT0] (battery present)
[ 2.137138] wmi: Mapper loaded
[ 2.137373] Non-volatile memory driver v1.3
[ 2.143385] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.144654] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 2.147991] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[ 2.156441] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 2.156444] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.156445] thinkpad_acpi: ThinkPad BIOS G6ET59WW (2.03 ), EC unknown
[ 2.156446] thinkpad_acpi: Lenovo ThinkPad X1 Carbon, model 3443CTO
[ 2.156985] thinkpad_acpi: Unsupported brightness interface, please contact ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx
[ 2.157184] thinkpad_acpi: radio switch found; radios are enabled
[ 2.157304] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.157306] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.158847] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 2.159357] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.160702] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 2.161208] ACPI: bus type USB registered
[ 2.161313] usbcore: registered new interface driver usbfs
[ 2.161368] usbcore: registered new interface driver hub
[ 2.161403] usbcore: registered new device driver usb
[ 2.180816] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.180824] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.180912] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.180934] xhci_hcd 0000:00:14.0: irq 28 for MSI/MSI-X
[ 2.180998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.181000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.181001] usb usb1: Product: xHCI Host Controller
[ 2.181002] usb usb1: Manufacturer: Linux 3.18.0-rc6+ xhci-hcd
[ 2.181003] usb usb1: SerialNumber: 0000:00:14.0
[ 2.181122] hub 1-0:1.0: USB hub found
[ 2.181130] hub 1-0:1.0: 4 ports detected
[ 2.181543] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.181548] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.181589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.181591] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.181593] usb usb2: Product: xHCI Host Controller
[ 2.181594] usb usb2: Manufacturer: Linux 3.18.0-rc6+ xhci-hcd
[ 2.181596] usb usb2: SerialNumber: 0000:00:14.0
[ 2.181715] hub 2-0:1.0: USB hub found
[ 2.181727] hub 2-0:1.0: 4 ports detected
[ 2.181890] usb: failed to peer usb2-port2 and usb1-port1 by location (usb2-port2:none) (usb1-port1:usb2-port1)
[ 2.181891] usb usb2-port2: failed to peer to usb1-port1 (-16)
[ 2.181892] usb: port power management may be unreliable
[ 2.182078] usb: failed to peer usb2-port3 and usb1-port1 by location (usb2-port3:none) (usb1-port1:usb2-port1)
[ 2.182080] usb usb2-port3: failed to peer to usb1-port1 (-16)
[ 2.182192] usb: failed to peer usb2-port4 and usb1-port1 by location (usb2-port4:none) (usb1-port1:usb2-port1)
[ 2.182194] usb usb2-port4: failed to peer to usb1-port1 (-16)
[ 2.186705] iTCO_vendor_support: vendor-support=0
[ 2.189143] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.189180] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.189246] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.206778] tpm_tis 00:05: TPM is disabled/deactivated (0x6)
[ 2.209376] AVX version of gcm_enc/dec engaged.
[ 2.209379] AES CTR mode by8 optimization enabled
[ 2.211589] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.230955] alg: No test for crc32 (crc32-pclmul)
[ 2.240498] [drm] Initialized drm 1.1.0 20060810
[ 2.242923] cfg80211: Calling CRDA to update world regulatory domain
[ 2.247481] snd_hda_intel 0000:00:1b.0: irq 29 for MSI/MSI-X
[ 2.256459] sound hdaudioC0D0: No codec parser is available
[ 2.256737] sound hdaudioC0D3: No codec parser is available
[ 2.281006] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 2.281008] Copyright(c) 2003- 2014 Intel Corporation
[ 2.281165] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.281318] iwlwifi 0000:03:00.0: irq 30 for MSI/MSI-X
[ 2.281438] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000g2a-6.ucode failed with error -2
[ 2.281451] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000g2a-5.ucode failed with error -2
[ 2.281453] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-6000g2a-5.ucode' failed.
[ 2.281521] iwlwifi 0000:03:00.0: no suitable firmware found!
[ 2.303852] Adding 3785724k swap on /dev/sda7. Priority:-1 extents:1 across:3785724k SSFS
[ 2.305401] cfg80211: World regulatory domain updated:
[ 2.305403] cfg80211: DFS Master region: unset
[ 2.305404] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.305406] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.305407] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.305409] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.305410] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.305411] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2.305412] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2.305413] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.305414] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2.392117] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem
[ 2.393920] EXT4-fs (sda5): mounted filesystem without journal. Opts: (null)
[ 2.399659] [drm] Memory usable by graphics device = 2048M
[ 2.399662] [drm] Replacing VGA console driver
[ 2.400606] Console: switching to colour dummy device 80x25
[ 2.401978] systemd-journald[178]: Received request to flush runtime journal from PID 1
[ 2.423043] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 2.423058] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.423059] [drm] Driver supports precise vblank timestamp query.
[ 2.423130] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.475378] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 2.475457] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 2.475661] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 2.531157] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 2.603280] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 2.607130] RPC: Registered named UNIX socket transport module.
[ 2.607132] RPC: Registered udp transport module.
[ 2.607133] RPC: Registered tcp transport module.
[ 2.607134] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.615914] FS-Cache: Loaded
[ 2.620026] fbcon: inteldrmfb (fb0) is primary device
[ 2.653203] FS-Cache: Netfs 'nfs' registered for caching
[ 2.683476] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 2.807796] Switched to clocksource tsc
[ 2.903109] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 2.903111] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[ 2.992321] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00, board id: 2182, fw id: 1164733
[ 2.992340] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.031308] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 3.364902] Console: switching to colour frame buffer device 200x56
[ 3.373650] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.373652] i915 0000:00:02.0: registered panic notifier
[ 3.676431] random: nonblocking pool is initialized
[ 7.092288] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.286827] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9

--
- Jeremiah Mahler
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/