Re: [PATCH 3/3] i8k: Remove laptop specific config data (fan_mult, fan_max) from driver

[Pali RohÃr]

On Thursday 18 December 2014 16:08:51 Valdis.Kletnieks@xxxxxx 
wrote:
> On Thu, 18 Dec 2014 12:08:58 +0100, Pali RohÃr said:
> > So your BIOS cannot report nominal_rpm and because your
> > machine=20 is not in dmi list, all 3 patches do nothing for
> > your machine.
> > 
> > But you need to set multiplier to 1, right?
> > 
> > What about this patch? (on top of 3/3)
> > 
> > --- a/drivers/char/i8k.c
> > +++ b/drivers/char/i8k.c
> > @@ -850,6 +850,10 @@ static int __init i8k_probe(void)
> > 
> >  		 */
> >  		
> >  		for (fan = 0; fan < I8K_FAN_COUNT; ++fan) {
> >  		
> >  			i8k_fan_mult[fan] = I8K_FAN_DEFAULT_MULT;
> > 
> > +			if (i8k_get_fan_rpm(fan) > I8K_FAN_MAX_RPM) {
> > +				i8k_fan_mult[fan] = 1;
> > +				continue;
> > +			}
> > 
> >  			for (val = 0; val < 256; ++val) {
> 
> Dell Latitude E6530, linux-next 20141208 plus the 3 patches
> you posted on Nov 30 (support labels), plus the 4 of 3
> patches in this go around, and sensors reports:
> 
> i8k-virtual-0
> Adapter: Virtual device
> fan2:        2774 RPM
> 
> and under CPU load, that number rises to 3200 or so, so it
> seems to be working....
> 
> So you probably should fold this into the current set of
> patches, and feel free to put this in there:
> 
> Tested-By: Valdis Kletnieks <valdis.kletnieks@xxxxxx>

Thanks for testing. Anyway I would like to know if your dell 
machine supports i8k_get_fan_nominal_rpm(). Can you test without 
above 4 lines patch?

-- 
Pali RohÃr
pali.rohar@xxxxxxxxx

Attachment: signature.asc
Description: This is a digitally signed message part.