[RESEND PATCH v7 3/5] hwmon: ina2xx: don't accept shunt values greater than the calibration factor

[Bartosz Golaszewski]

Shunt resistance values greater than the chip's calibration factor make no
sense since the actual value written to the register equals:

	<calibration factor> / <shunt>

Bail-out from ina2xx_probe() if the configured value is greater than the
calibration factor.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
 drivers/hwmon/ina2xx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 39e017b..3234e57 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -313,7 +313,8 @@ static int ina2xx_probe(struct i2c_client *client,
 	data->config = &ina2xx_config[data->kind];
 	data->client = client;
 
-	if (data->rshunt <= 0)
+	if (data->rshunt <= 0 ||
+	    data->rshunt > data->config->calibration_factor)
 		return -ENODEV;
 
 	ret = ina2xx_init(data);
-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/