[PATCH 0/2] phy: ti-pipe3: fixes for 3.19-rc

[Roger Quadros]

Hi,

During system suspend L3INIT_960M_GFCLK and L3INIT_480M_GFCLK clocks remain
active on the DRA7 platform. This is because the pipe3 driver doesn't shut
them off as part of .suspend(). Patch 1 addresses this issue.

SATA on both OMAP5 and DRA7 breaks when SATA drive is plugged in after a
system suspend/resume or if  AHCI_PLATFORM driver is used as module.
Patch 2 fixes it.

Hope to get these 2 patches in through the 3.19-rc cycle.

Tony, patch 2 touches dra7.dtsi and omap5.dts and will need your Ack.
Hopefully it can go in through Kishon's PHY tree.

cheers,
-roger

Roger Quadros (2):
  phy: ti-pipe3: Disable clocks on system suspend
  phy: ti-pipe3: Fix SATA across suspend/resume

 arch/arm/boot/dts/dra7.dtsi  |   4 +-
 arch/arm/boot/dts/omap5.dtsi |   4 +-
 drivers/phy/phy-ti-pipe3.c   | 138 +++++++++++++++++++++++++++++++++----------
 3 files changed, 111 insertions(+), 35 deletions(-)

-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/