[PATCH v7 2/4] fpga manager: add sysfs interface document

[atull]

From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>

Add documentation under drivers/staging for new fpga manager's
sysfs interface.

Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
---
v5  : (actually second version, but keeping version numbers
      aligned with rest of patch series)
      Move document to drivers/staging/fpga/Documentation/ABI

v6  : No change in this patch for v6 of the patch set

v7  : No change in this patch for v7 of the patch set
---
 .../Documentation/ABI/sysfs-class-fpga-manager     |   38 ++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager

diff --git a/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager b/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager
new file mode 100644
index 0000000..eb600f2
--- /dev/null
+++ b/drivers/staging/fpga/Documentation/ABI/sysfs-class-fpga-manager
@@ -0,0 +1,38 @@
+What:		/sys/class/fpga_manager/<fpga>/name
+Date:		October 2014
+KernelVersion:	3.18
+Contact:	Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
+Description:	Name of low level driver.
+
+What:		/sys/class/fpga_manager/<fpga>/firmware
+Date:		October 2014
+KernelVersion:	3.18
+Contact:	Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
+Description:	Name of the FPGA image file to load using firmware class.
+
+What:		/sys/class/fpga_manager/<fpga>/reset
+Date:		October 2014
+KernelVersion:	3.18
+Contact:	Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
+Description:	Write 1 to reset the FPGA
+
+What:		/sys/class/fpga_manager/<fpga>/state
+Date:		October 2014
+KernelVersion:	3.18
+Contact:	Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
+Description:	Read state of fpga framework state machine as a string.
+		Valid states may vary by manufacturer; superset is:
+		* unknown		= can't determine state
+		* power_off		= FPGA power is off
+		* power_up		= FPGA reports power is up
+		* reset			= FPGA held in reset state
+		* firmware_request	= firmware class request in progress
+		* firmware_request_err	= firmware request failed
+		* write_init		= FPGA being prepared for programming
+		* write_init_err	= Error while preparing FPGA for
+					  programming
+		* write			= FPGA ready to receive image data
+		* write_err		= Error while programming
+		* write_complete	= Doing post programming steps
+		* write_complete_err	= Error while doing post programming
+		* operating		= FPGA is programmed and operating
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/