Re: e1000_netpoll(): disable_irq() triggers might_sleep() on linux-next

[Bart Van Assche]

On 12/02/14 17:35, Sabrina Dubroca wrote:
> Hello, sorry for the delay.
> 
> 2014-10-29, 20:36:03 +0100, Peter Zijlstra wrote:
>> On Wed, Oct 29, 2014 at 07:33:00PM +0100, Thomas Gleixner wrote:
>>> Yuck. No. You are just papering over the problem.
>>>
>>> What happens if you add 'threadirqs' to the kernel command line? Or if
>>> the interrupt line is shared with a real threaded interrupt user?
>>>
>>> The proper solution is to have a poll_lock for e1000 which serializes
>>> the hardware interrupt against netpoll instead of using
>>> disable/enable_irq().
>>>
>>> In fact that's less expensive than the disable/enable_irq() dance and
>>> the chance of contention is pretty low. If done right it will be a
>>> NOOP for the CONFIG_NET_POLL_CONTROLLER=n case.
>>>
>>
>> OK a little something like so then I suppose.. But I suspect most all
>> the network drivers will need this and maybe more, disable_irq() is a
>> popular little thing and we 'just' changed semantics on them.
>>
>> ---
>>  drivers/net/ethernet/intel/e1000/e1000.h      |  2 ++
>>  drivers/net/ethernet/intel/e1000/e1000_main.c | 22 +++++++++++++++++-----
>>  kernel/irq/manage.c                           |  2 +-
>>  3 files changed, 20 insertions(+), 6 deletions(-)
> 
> I've been running with variants of this patch, things seem ok.
> 
> As noted earlier, there are a lot of drivers doing this disable_irq +
> irq_handler + enable_irq sequence.  I found about 60.
> Many already take a lock in the interrupt handler, and look like we
> could just remove the call to disable_irq (example: cp_interrupt,
> drivers/net/ethernet/realtek/8139cp.c).
> 
> Here's how I modified your patch.  The locking compiles away if
> CONFIG_NET_POLL_CONTROLLER=n.
> 
> I can work on converting all the drivers from disable_irq to
> netpoll_irq_lock, if that's okay with you.
> 
> In igb there's also a synchronize_irq() called from the netpoll
> controller (in igb_irq_disable()), I think a similar locking scheme
> would work.
> I also saw a few disable_irq_nosync and disable_percpu_irq. These are
> okay?
> 
> [ ... ]

Hello,

Earlier today I ran into the bug mentioned at the start of this thread
with kernel 3.19-rc1 and the e1000e driver. Can anyone tell me what the
latest status is ?

Thanks,

Bart.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/