Re: regression bisected; KVM: entry failed, hardware error 0x80000021

[Chen, Tiejun]

On 2014/12/23 9:50, Chen, Tiejun wrote:
> On 2014/12/22 17:23, Jamie Heilman wrote:
> > Chen, Tiejun wrote:
> > > On 2014/12/21 20:46, Jamie Heilman wrote:
> > > > With v3.19-rc1 when I run qemu-system-x86_64 -machine pc,accel=kvm I
> > > > get:
> > > >
> > > > KVM: entry failed, hardware error 0x80000021
> > >
> > > Looks some MSR writing issues such a failed entry.
> > >
> > > > If you're running a guest on an Intel machine without unrestricted mode
> > > > support, the failure can be most likely due to the guest entering an
> > > > invalid
> > > > state for Intel VT. For example, the guest maybe running in big real
> > > > mode
> > > > which is not supported on less recent Intel processors.
> > > >
> > > > EAX=00000000 EBX=00000000 ECX=00000000 EDX=00000663
> > > > ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
> > > > EIP=0000e05b EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
> > > > ES =0000 00000000 0000ffff 00009300
> > > > CS =f000 000f0000 0000ffff 00009b00
> > > > SS =0000 00000000 0000ffff 00009300
> > > > DS =0000 00000000 0000ffff 00009300
> > > > FS =0000 00000000 0000ffff 00009300
> > > > GS =0000 00000000 0000ffff 00009300
> > > > LDT=0000 00000000 0000ffff 00008200
> > > > TR =0000 00000000 0000ffff 00008b00
> > > > GDT=     00000000 0000ffff
> > > > IDT=     00000000 0000ffff
> > > > CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000
> > > > DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
> > > > DR3=0000000000000000
> > > > DR6=00000000ffff0ff0 DR7=0000000000000400
> > > > EFER=0000000000000000
> > >
> > > And I don't see any obvious wrong as well. Any valuable info from dmesg?
> >
> > With the simple qemu command above, on 3.18.1 I see:
> >
> > kern.info: kvm: zapping shadow pages for mmio generation wraparound
> >
> > when I fire up a full guest that's actually useful I get:
> >
> > kern.info: kvm: zapping shadow pages for mmio generation wraparound
> > kern.err: kvm [4073]: vcpu0 disabled perfctr wrmsr: 0xc1 data 0xffff
> >
> > On 3.18.0-rc3-00042-g34a1cd6 nothing appears in the dmesg, just the
> > message I mention above to stderr.  Same thing with a stock
> > 3.19.0-rc1.  Once I apply your patch the simple test command produces
> > the same zapping shadow pages messages as 3.18.1, and a test guest of
> > a Debian Jessie image (w/stock distro kernel) produces the same thing
> > with disabled perfctr wrmsr message.  However, it doesn't look like
>
> Sorry I'm not sure if I understood current status. Looks 3.19-rc1 & my
> patch just fix that error above,
>
> KVM: entry failed, hardware error 0x80000021
> ...
>
> Right?
>
> > I'm entirely out of the woods, because one of my other guest VMs with a
> > custom kernel that works great under 3.18.1 now fails to run.  Nothing
> > in dmesg, but here's the stderr:
>
> But even you revert 34a1cd60d17 or just apply my patch, something else
> introduced between 3.18.1 and 3.19-rc1 led this error below, right?
>
> > KVM internal error. Suberror: 1
> > emulation failure
> > EAX=000de494 EBX=00000000 ECX=00000000 EDX=00000cfd
> > ESI=00000059 EDI=00000000 EBP=00000000 ESP=00006fb4
> > EIP=000f15c1 EFL=00010016 [----AP-] CPL=0 II=0 A20=1 SMM=0 HLT=0
> > ES =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
> > CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA]
> > SS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
> > DS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
> > FS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
> > GS =0010 00000000 ffffffff 00c09300 DPL=0 DS   [-WA]
> > LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
> > TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
> > GDT=     000f6be8 00000037
> > IDT=     000f6c26 00000000
> > CR0=60000011 CR2=00000000 CR3=00000000 CR4=00000000
> > DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000
> > DR3=0000000000000000
> > DR6=00000000ffff0ff0 DR7=0000000000000400
> > EFER=0000000000000000
> > Code=e8 ae fc ff ff 89 f2 a8 10 89 d8 75 0a b9 41 15 ff ff ff d1 <5b>
> > 5e c3 5b 5e e9 76 ff ff ff b0 11 e6 20 e6 a0 b0 08 e6 21 b0 70 e6 a1
> > b0 04 e6 21 b0 02
> >
> > FWIW, I get the same thing with 34a1cd60d17 reverted.  Maybe there are
> > two bugs, maybe there's more to this first one.  I can repro this
>
> So if my understanding is correct, this is probably another bug. And
> especially, I already saw the same log in another thread, "Cleaning up
> the KVM clock". Maybe you can continue to `git bisect` to locate that
> bad commit.

Looks just now Andy found that commit, 
0e60b0799fedc495a5c57dbd669de3c10d72edd2 "kvm: change memslot sorting 
rule from size to GFN", maybe you can try to revert this to try yours again.

Thanks
Tiejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/