Re: [PATCH 1/2] MIPS: Move device-trees into vendor sub-directories

From: Florian Fainelli
Date: Tue Dec 23 2014 - 11:08:36 EST

Next message: Gmail: "Re: [PATCH 1/1] staging: skein: Delete a useless white space line"
Previous message: Gmail: "Re: [PATCH 1/1] staging: skein: Delete a useless white space line"
In reply to: Andrew Bresticker: "[PATCH 2/2] MIPS: Add dtbs_install target"
Next in thread: Kevin Cernekee: "Re: [PATCH 1/2] MIPS: Move device-trees into vendor sub-directories"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

2014-12-22 15:27 GMT-08:00 Andrew Bresticker <abrestic@xxxxxxxxxxxx>:
> Move the MIPS device-trees into the appropriate vendor sub-directories.
>
> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
> ---
> arch/mips/Makefile | 2 +-
> arch/mips/boot/dts/Makefile | 33 ++++++++--------------
> arch/mips/boot/dts/bcm/Makefile | 9 ++++++
> arch/mips/boot/dts/{ => bcm}/bcm3384.dtsi | 0
> arch/mips/boot/dts/{ => bcm}/bcm93384wvg.dts | 0

Let's use brcm here, which is the DT vendor prefix, or go full name
with broadcom, there has been enough debate in the past about this ;)

Thanks!

> arch/mips/boot/dts/cavium-octeon/Makefile | 9 ++++++
> .../boot/dts/{ => cavium-octeon}/octeon_3xxx.dts | 0
> .../boot/dts/{ => cavium-octeon}/octeon_68xx.dts | 0
> arch/mips/boot/dts/lantiq/Makefile | 9 ++++++
> arch/mips/boot/dts/{ => lantiq}/danube.dtsi | 0
> arch/mips/boot/dts/{ => lantiq}/easy50712.dts | 0
> arch/mips/boot/dts/mti/Makefile | 9 ++++++
> arch/mips/boot/dts/{ => mti}/sead3.dts | 0
> arch/mips/boot/dts/netlogic/Makefile | 12 ++++++++
> arch/mips/boot/dts/{ => netlogic}/xlp_evp.dts | 0
> arch/mips/boot/dts/{ => netlogic}/xlp_fvp.dts | 0
> arch/mips/boot/dts/{ => netlogic}/xlp_gvp.dts | 0
> arch/mips/boot/dts/{ => netlogic}/xlp_svp.dts | 0
> arch/mips/boot/dts/ralink/Makefile | 12 ++++++++
> arch/mips/boot/dts/{ => ralink}/mt7620a.dtsi | 0
> arch/mips/boot/dts/{ => ralink}/mt7620a_eval.dts | 0
> arch/mips/boot/dts/{ => ralink}/rt2880.dtsi | 0
> arch/mips/boot/dts/{ => ralink}/rt2880_eval.dts | 0
> arch/mips/boot/dts/{ => ralink}/rt3050.dtsi | 0
> arch/mips/boot/dts/{ => ralink}/rt3052_eval.dts | 0
> arch/mips/boot/dts/{ => ralink}/rt3883.dtsi | 0
> arch/mips/boot/dts/{ => ralink}/rt3883_eval.dts | 0
> 27 files changed, 73 insertions(+), 22 deletions(-)
> create mode 100644 arch/mips/boot/dts/bcm/Makefile
> rename arch/mips/boot/dts/{ => bcm}/bcm3384.dtsi (100%)
> rename arch/mips/boot/dts/{ => bcm}/bcm93384wvg.dts (100%)
> create mode 100644 arch/mips/boot/dts/cavium-octeon/Makefile
> rename arch/mips/boot/dts/{ => cavium-octeon}/octeon_3xxx.dts (100%)
> rename arch/mips/boot/dts/{ => cavium-octeon}/octeon_68xx.dts (100%)
> create mode 100644 arch/mips/boot/dts/lantiq/Makefile
> rename arch/mips/boot/dts/{ => lantiq}/danube.dtsi (100%)
> rename arch/mips/boot/dts/{ => lantiq}/easy50712.dts (100%)
> create mode 100644 arch/mips/boot/dts/mti/Makefile
> rename arch/mips/boot/dts/{ => mti}/sead3.dts (100%)
> create mode 100644 arch/mips/boot/dts/netlogic/Makefile
> rename arch/mips/boot/dts/{ => netlogic}/xlp_evp.dts (100%)
> rename arch/mips/boot/dts/{ => netlogic}/xlp_fvp.dts (100%)
> rename arch/mips/boot/dts/{ => netlogic}/xlp_gvp.dts (100%)
> rename arch/mips/boot/dts/{ => netlogic}/xlp_svp.dts (100%)
> create mode 100644 arch/mips/boot/dts/ralink/Makefile
> rename arch/mips/boot/dts/{ => ralink}/mt7620a.dtsi (100%)
> rename arch/mips/boot/dts/{ => ralink}/mt7620a_eval.dts (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt2880.dtsi (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt2880_eval.dts (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt3050.dtsi (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt3052_eval.dts (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt3883.dtsi (100%)
> rename arch/mips/boot/dts/{ => ralink}/rt3883_eval.dts (100%)
>
> diff --git a/arch/mips/Makefile b/arch/mips/Makefile
> index 37fce70..9c4b9c8 100644
> --- a/arch/mips/Makefile
> +++ b/arch/mips/Makefile
> @@ -354,7 +354,7 @@ core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
>
> PHONY += dtbs
> dtbs: scripts
> - $(Q)$(MAKE) $(build)=arch/mips/boot/dts dtbs
> + $(Q)$(MAKE) $(build)=arch/mips/boot/dts
>
> archprepare:
> ifdef CONFIG_MIPS32_N32
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 4f49fa4..90d1fbc 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -1,21 +1,12 @@
> -dtb-$(CONFIG_BCM3384) += bcm93384wvg.dtb
> -dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
> -dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
> -dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
> -dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
> -dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb
> -dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb
> -dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb
> -dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb
> -dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb
> -dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
> -dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
> -
> -obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> -
> -targets += dtbs
> -targets += $(dtb-y)
> -
> -dtbs: $(addprefix $(obj)/, $(dtb-y))
> -
> -clean-files += *.dtb *.dtb.S
> +dts-dirs += bcm
> +dts-dirs += cavium-octeon
> +dts-dirs += lantiq
> +dts-dirs += mti
> +dts-dirs += netlogic
> +dts-dirs += ralink
> +
> +obj-y := $(addsuffix /, $(dts-dirs))
> +
> +always := $(dtb-y)
> +subdir-y := $(dts-dirs)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/bcm/Makefile b/arch/mips/boot/dts/bcm/Makefile
> new file mode 100644
> index 0000000..a353d4e
> --- /dev/null
> +++ b/arch/mips/boot/dts/bcm/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_BCM3384) += bcm93384wvg.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/bcm3384.dtsi b/arch/mips/boot/dts/bcm/bcm3384.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/bcm3384.dtsi
> rename to arch/mips/boot/dts/bcm/bcm3384.dtsi
> diff --git a/arch/mips/boot/dts/bcm93384wvg.dts b/arch/mips/boot/dts/bcm/bcm93384wvg.dts
> similarity index 100%
> rename from arch/mips/boot/dts/bcm93384wvg.dts
> rename to arch/mips/boot/dts/bcm/bcm93384wvg.dts
> diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile
> new file mode 100644
> index 0000000..5b99c40
> --- /dev/null
> +++ b/arch/mips/boot/dts/cavium-octeon/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
> similarity index 100%
> rename from arch/mips/boot/dts/octeon_3xxx.dts
> rename to arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts
> diff --git a/arch/mips/boot/dts/octeon_68xx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
> similarity index 100%
> rename from arch/mips/boot/dts/octeon_68xx.dts
> rename to arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts
> diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile
> new file mode 100644
> index 0000000..0906c62
> --- /dev/null
> +++ b/arch/mips/boot/dts/lantiq/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/danube.dtsi
> rename to arch/mips/boot/dts/lantiq/danube.dtsi
> diff --git a/arch/mips/boot/dts/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts
> similarity index 100%
> rename from arch/mips/boot/dts/easy50712.dts
> rename to arch/mips/boot/dts/lantiq/easy50712.dts
> diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile
> new file mode 100644
> index 0000000..ef1f3db
> --- /dev/null
> +++ b/arch/mips/boot/dts/mti/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts
> similarity index 100%
> rename from arch/mips/boot/dts/sead3.dts
> rename to arch/mips/boot/dts/mti/sead3.dts
> diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile
> new file mode 100644
> index 0000000..e126cd3
> --- /dev/null
> +++ b/arch/mips/boot/dts/netlogic/Makefile
> @@ -0,0 +1,12 @@
> +dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb
> +dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb
> +dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb
> +dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/xlp_evp.dts b/arch/mips/boot/dts/netlogic/xlp_evp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_evp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_evp.dts
> diff --git a/arch/mips/boot/dts/xlp_fvp.dts b/arch/mips/boot/dts/netlogic/xlp_fvp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_fvp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_fvp.dts
> diff --git a/arch/mips/boot/dts/xlp_gvp.dts b/arch/mips/boot/dts/netlogic/xlp_gvp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_gvp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_gvp.dts
> diff --git a/arch/mips/boot/dts/xlp_svp.dts b/arch/mips/boot/dts/netlogic/xlp_svp.dts
> similarity index 100%
> rename from arch/mips/boot/dts/xlp_svp.dts
> rename to arch/mips/boot/dts/netlogic/xlp_svp.dts
> diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile
> new file mode 100644
> index 0000000..2a72259
> --- /dev/null
> +++ b/arch/mips/boot/dts/ralink/Makefile
> @@ -0,0 +1,12 @@
> +dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb
> +dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb
> +dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb
> +dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/mt7620a.dtsi
> rename to arch/mips/boot/dts/ralink/mt7620a.dtsi
> diff --git a/arch/mips/boot/dts/mt7620a_eval.dts b/arch/mips/boot/dts/ralink/mt7620a_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/mt7620a_eval.dts
> rename to arch/mips/boot/dts/ralink/mt7620a_eval.dts
> diff --git a/arch/mips/boot/dts/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt2880.dtsi
> rename to arch/mips/boot/dts/ralink/rt2880.dtsi
> diff --git a/arch/mips/boot/dts/rt2880_eval.dts b/arch/mips/boot/dts/ralink/rt2880_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt2880_eval.dts
> rename to arch/mips/boot/dts/ralink/rt2880_eval.dts
> diff --git a/arch/mips/boot/dts/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt3050.dtsi
> rename to arch/mips/boot/dts/ralink/rt3050.dtsi
> diff --git a/arch/mips/boot/dts/rt3052_eval.dts b/arch/mips/boot/dts/ralink/rt3052_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt3052_eval.dts
> rename to arch/mips/boot/dts/ralink/rt3052_eval.dts
> diff --git a/arch/mips/boot/dts/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi
> similarity index 100%
> rename from arch/mips/boot/dts/rt3883.dtsi
> rename to arch/mips/boot/dts/ralink/rt3883.dtsi
> diff --git a/arch/mips/boot/dts/rt3883_eval.dts b/arch/mips/boot/dts/ralink/rt3883_eval.dts
> similarity index 100%
> rename from arch/mips/boot/dts/rt3883_eval.dts
> rename to arch/mips/boot/dts/ralink/rt3883_eval.dts
> --
> 2.2.0.rc0.207.ga3a616c
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Gmail: "Re: [PATCH 1/1] staging: skein: Delete a useless white space line"
Previous message: Gmail: "Re: [PATCH 1/1] staging: skein: Delete a useless white space line"
In reply to: Andrew Bresticker: "[PATCH 2/2] MIPS: Add dtbs_install target"
Next in thread: Kevin Cernekee: "Re: [PATCH 1/2] MIPS: Move device-trees into vendor sub-directories"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]