Re: [PATCH 2/4] mtd: nand: atmel: Update DT documentation after splitting NFC and NAND

[Josh Wu]

Hi, Boris

Thanks for the patch.

You need to rebase on the top of current mtd-l2 git tree. As I had some 
change on the binding document.

Best Regards,
Josh Wu

On 12/5/2014 6:30 AM, Boris Brezillon wrote:
> The NAND and NFC (NAND Flash Controller) were linked together with a
> parent <-> child relationship.
>
> This model has several drawbacks:
> - it does not allow for multiple NAND chip handling while the controller
>    support multi-chip (even though the driver is not ready yet)
> - it mixes NAND partitions and NFC nodes at the same level (which is a bit
>    disturbing)
> - the introduction of the EBI bus implies defining NAND chips under the
>    EBI node, and the ranges available under the EBI node should be
>    restricted to EBI address space, while the NFC references several
>    registers outside of these EBI ranges.
>
> Move the NFC node outside of the NAND node, to get a more future-proof
> model.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
> ---
>   .../devicetree/bindings/mtd/atmel-nand.txt         | 46 ++++++++++++----------
>   1 file changed, 26 insertions(+), 20 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> index 6edc3b6..8896850 100644
> --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
> @@ -30,15 +30,19 @@ Optional properties:
>     sector size 1024.
>   - nand-bus-width : 8 or 16 bus width if not present 8
>   - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
> -- Nand Flash Controller(NFC) is a slave driver under Atmel nand flash
> -  - Required properties:
> -    - compatible : "atmel,sama5d3-nfc".
> -    - reg : should specify the address and size used for NFC command registers,
> -            NFC registers and NFC Sram. NFC Sram address and size can be absent
> -            if don't want to use it.
> -    - clocks: phandle to the peripheral clock
> -  - Optional properties:
> -    - atmel,write-by-sram: boolean to enable NFC write by sram.
> +- atmel,nfc: phandle referencing the NAND Flash Controller, if available.
> +
> +The NAND Flash Controller (NFC) is an advanced NAND controller and should be
> +used in conjunction with the NAND flash device.
> +Required properties:
> + - compatible : "atmel,sama5d3-nfc".
> + - reg : should specify the address and size used for NFC command registers,
> +         NFC registers and NFC Sram. NFC Sram address and size can be absent
> +         if you don't want to use it.
> + - clocks: phandle to the peripheral clock
> +
> +Optional properties:
> + - atmel,write-by-sram: boolean to enable NFC write by sram.
>   
>   Examples:
>   nand0: nand@40000000,0 {
> @@ -89,21 +93,23 @@ nand0: nand@40000000 {
>   };
>   
>   /* for NFC supported chips */
> +nfc: nfc@70000000 {
> +	compatible = "atmel,sama5d3-nfc";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	clocks = <&hsmc_clk>
> +	reg = <
> +		0x70000000 0x10000000	/* NFC Command Registers */
> +		0xffffc000 0x00000070	/* NFC HSMC regs */
> +		0x00200000 0x00100000	/* NFC SRAM banks */
> +	>;
> +};
> +
>   nand0: nand@40000000 {
>   	compatible = "atmel,at91rm9200-nand";
>   	#address-cells = <1>;
>   	#size-cells = <1>;
>   	ranges;
> +	atmel,nfc = <&nfc>;
>           ...
> -        nfc@70000000 {
> -		compatible = "atmel,sama5d3-nfc";
> -		#address-cells = <1>;
> -		#size-cells = <1>;
> -		clocks = <&hsmc_clk>
> -		reg = <
> -			0x70000000 0x10000000	/* NFC Command Registers */
> -			0xffffc000 0x00000070	/* NFC HSMC regs */
> -			0x00200000 0x00100000	/* NFC SRAM banks */
> -		>;
> -	};
>   };

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/