Re: [PATCH] bfin_can: move the header file to arch independent location

From: Oliver Hartkopp
Date: Sat Dec 27 2014 - 06:10:07 EST

Next message: Koshy George: "[PATCH] NFS: nfs4_fs.h: Fix for checkpatch warnings"
Previous message: Gregory CLEMENT: "[PATCH 3/3] ata: libahci: Allow to use multiple regulators"
In reply to: Aaron Wu: "[PATCH] bfin_can: move the header file to arch independent location"
Next in thread: Wu, Aaron: "RE: [PATCH] bfin_can: move the header file to arch independent location"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

NACK!

As bfin_can.c is the only user of defines from this include file just add the
needed(!) defines directly to bfin_can.c

Currently bfin_can.h holds a *lot* of defines that are NOT referenced
anywhere, e.g. search for MC0 - MC31, MD0 - MD31, RMP0 - RMP31, RML0 - RML31
and lots more in bfin_can.c ...

So the correct way is to check which defines are *really* referenced and add
these directly to bfin_can.c (the only user) when removing bfin_can.h

Best regards,
Oliver

On 12/26/2014 04:07 AM, Aaron Wu wrote:
> bfin_can: move the header file to arch independent location
>
> Signed-off-by: Aaron Wu <Aaron.wu@xxxxxxxxxx>
> ---
> arch/blackfin/include/asm/bfin_can.h | 728 ----------------------------------
> drivers/net/can/bfin_can.c | 2 +-
> drivers/net/can/bfin_can.h | 728 ++++++++++++++++++++++++++++++++++
> 3 files changed, 729 insertions(+), 729 deletions(-)
> delete mode 100644 arch/blackfin/include/asm/bfin_can.h
> create mode 100644 drivers/net/can/bfin_can.h
>
> diff --git a/arch/blackfin/include/asm/bfin_can.h b/arch/blackfin/include/asm/bfin_can.h
> deleted file mode 100644
> index b1492e0..0000000
> --- a/arch/blackfin/include/asm/bfin_can.h
> +++ /dev/null
> @@ -1,728 +0,0 @@
> -/*
> - * bfin_can.h - interface to Blackfin CANs
> - *
> - * Copyright 2004-2009 Analog Devices Inc.
> - *
> - * Licensed under the GPL-2 or later.
> - */
> -
> -#ifndef __ASM_BFIN_CAN_H__
> -#define __ASM_BFIN_CAN_H__
> -
> -/*
> - * transmit and receive channels
> - */
> -#define TRANSMIT_CHL 24
> -#define RECEIVE_STD_CHL 0
> -#define RECEIVE_EXT_CHL 4
> -#define RECEIVE_RTR_CHL 8
> -#define RECEIVE_EXT_RTR_CHL 12
> -#define MAX_CHL_NUMBER 32
> -
> -/*
> - * All Blackfin system MMRs are padded to 32bits even if the register
> - * itself is only 16bits. So use a helper macro to streamline this.
> - */
> -#define __BFP(m) u16 m; u16 __pad_##m
> -
> -/*
> - * bfin can registers layout
> - */
> -struct bfin_can_mask_regs {
> - __BFP(aml);
> - __BFP(amh);
> -};
> -
> -struct bfin_can_channel_regs {
> - /* data[0,2,4,6] -> data{0,1,2,3} while data[1,3,5,7] is padding */
> - u16 data[8];
> - __BFP(dlc);
> - __BFP(tsv);
> - __BFP(id0);
> - __BFP(id1);
> -};
> -
> -struct bfin_can_regs {
> - /*
> - * global control and status registers
> - */
> - __BFP(mc1); /* offset 0x00 */
> - __BFP(md1); /* offset 0x04 */
> - __BFP(trs1); /* offset 0x08 */
> - __BFP(trr1); /* offset 0x0c */
> - __BFP(ta1); /* offset 0x10 */
> - __BFP(aa1); /* offset 0x14 */
> - __BFP(rmp1); /* offset 0x18 */
> - __BFP(rml1); /* offset 0x1c */
> - __BFP(mbtif1); /* offset 0x20 */
> - __BFP(mbrif1); /* offset 0x24 */
> - __BFP(mbim1); /* offset 0x28 */
> - __BFP(rfh1); /* offset 0x2c */
> - __BFP(opss1); /* offset 0x30 */
> - u32 __pad1[3];
> - __BFP(mc2); /* offset 0x40 */
> - __BFP(md2); /* offset 0x44 */
> - __BFP(trs2); /* offset 0x48 */
> - __BFP(trr2); /* offset 0x4c */
> - __BFP(ta2); /* offset 0x50 */
> - __BFP(aa2); /* offset 0x54 */
> - __BFP(rmp2); /* offset 0x58 */
> - __BFP(rml2); /* offset 0x5c */
> - __BFP(mbtif2); /* offset 0x60 */
> - __BFP(mbrif2); /* offset 0x64 */
> - __BFP(mbim2); /* offset 0x68 */
> - __BFP(rfh2); /* offset 0x6c */
> - __BFP(opss2); /* offset 0x70 */
> - u32 __pad2[3];
> - __BFP(clock); /* offset 0x80 */
> - __BFP(timing); /* offset 0x84 */
> - __BFP(debug); /* offset 0x88 */
> - __BFP(status); /* offset 0x8c */
> - __BFP(cec); /* offset 0x90 */
> - __BFP(gis); /* offset 0x94 */
> - __BFP(gim); /* offset 0x98 */
> - __BFP(gif); /* offset 0x9c */
> - __BFP(control); /* offset 0xa0 */
> - __BFP(intr); /* offset 0xa4 */
> - __BFP(version); /* offset 0xa8 */
> - __BFP(mbtd); /* offset 0xac */
> - __BFP(ewr); /* offset 0xb0 */
> - __BFP(esr); /* offset 0xb4 */
> - u32 __pad3[2];
> - __BFP(ucreg); /* offset 0xc0 */
> - __BFP(uccnt); /* offset 0xc4 */
> - __BFP(ucrc); /* offset 0xc8 */
> - __BFP(uccnf); /* offset 0xcc */
> - u32 __pad4[1];
> - __BFP(version2); /* offset 0xd4 */
> - u32 __pad5[10];
> -
> - /*
> - * channel(mailbox) mask and message registers
> - */
> - struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */
> - struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */
> -};
> -
> -#undef __BFP
> -
> -/* CAN_CONTROL Masks */
> -#define SRS 0x0001 /* Software Reset */
> -#define DNM 0x0002 /* Device Net Mode */
> -#define ABO 0x0004 /* Auto-Bus On Enable */
> -#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */
> -#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */
> -#define SMR 0x0020 /* Sleep Mode Request */
> -#define CSR 0x0040 /* CAN Suspend Mode Request */
> -#define CCR 0x0080 /* CAN Configuration Mode Request */
> -
> -/* CAN_STATUS Masks */
> -#define WT 0x0001 /* TX Warning Flag */
> -#define WR 0x0002 /* RX Warning Flag */
> -#define EP 0x0004 /* Error Passive Mode */
> -#define EBO 0x0008 /* Error Bus Off Mode */
> -#define SMA 0x0020 /* Sleep Mode Acknowledge */
> -#define CSA 0x0040 /* Suspend Mode Acknowledge */
> -#define CCA 0x0080 /* Configuration Mode Acknowledge */
> -#define MBPTR 0x1F00 /* Mailbox Pointer */
> -#define TRM 0x4000 /* Transmit Mode */
> -#define REC 0x8000 /* Receive Mode */
> -
> -/* CAN_CLOCK Masks */
> -#define BRP 0x03FF /* Bit-Rate Pre-Scaler */
> -
> -/* CAN_TIMING Masks */
> -#define TSEG1 0x000F /* Time Segment 1 */
> -#define TSEG2 0x0070 /* Time Segment 2 */
> -#define SAM 0x0080 /* Sampling */
> -#define SJW 0x0300 /* Synchronization Jump Width */
> -
> -/* CAN_DEBUG Masks */
> -#define DEC 0x0001 /* Disable CAN Error Counters */
> -#define DRI 0x0002 /* Disable CAN RX Input */
> -#define DTO 0x0004 /* Disable CAN TX Output */
> -#define DIL 0x0008 /* Disable CAN Internal Loop */
> -#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */
> -#define MRB 0x0020 /* Mode Read Back Enable */
> -#define CDE 0x8000 /* CAN Debug Enable */
> -
> -/* CAN_CEC Masks */
> -#define RXECNT 0x00FF /* Receive Error Counter */
> -#define TXECNT 0xFF00 /* Transmit Error Counter */
> -
> -/* CAN_INTR Masks */
> -#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */
> -#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */
> -#define GIRQ 0x0004 /* Global Interrupt */
> -#define SMACK 0x0008 /* Sleep Mode Acknowledge */
> -#define CANTX 0x0040 /* CAN TX Bus Value */
> -#define CANRX 0x0080 /* CAN RX Bus Value */
> -
> -/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
> -#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */
> -#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */
> -#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */
> -#define BASEID 0x1FFC /* Base Identifier */
> -#define IDE 0x2000 /* Identifier Extension */
> -#define RTR 0x4000 /* Remote Frame Transmission Request */
> -#define AME 0x8000 /* Acceptance Mask Enable */
> -
> -/* CAN_MBxx_TIMESTAMP Masks */
> -#define TSV 0xFFFF /* Timestamp */
> -
> -/* CAN_MBxx_LENGTH Masks */
> -#define DLC 0x000F /* Data Length Code */
> -
> -/* CAN_AMxxH and CAN_AMxxL Masks */
> -#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */
> -#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
> -#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
> -#define BASEID 0x1FFC /* Base Identifier */
> -#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */
> -#define FMD 0x4000 /* Full Mask Data Field Enable */
> -#define FDF 0x8000 /* Filter On Data Field Enable */
> -
> -/* CAN_MC1 Masks */
> -#define MC0 0x0001 /* Enable Mailbox 0 */
> -#define MC1 0x0002 /* Enable Mailbox 1 */
> -#define MC2 0x0004 /* Enable Mailbox 2 */
> -#define MC3 0x0008 /* Enable Mailbox 3 */
> -#define MC4 0x0010 /* Enable Mailbox 4 */
> -#define MC5 0x0020 /* Enable Mailbox 5 */
> -#define MC6 0x0040 /* Enable Mailbox 6 */
> -#define MC7 0x0080 /* Enable Mailbox 7 */
> -#define MC8 0x0100 /* Enable Mailbox 8 */
> -#define MC9 0x0200 /* Enable Mailbox 9 */
> -#define MC10 0x0400 /* Enable Mailbox 10 */
> -#define MC11 0x0800 /* Enable Mailbox 11 */
> -#define MC12 0x1000 /* Enable Mailbox 12 */
> -#define MC13 0x2000 /* Enable Mailbox 13 */
> -#define MC14 0x4000 /* Enable Mailbox 14 */
> -#define MC15 0x8000 /* Enable Mailbox 15 */
> -
> -/* CAN_MC2 Masks */
> -#define MC16 0x0001 /* Enable Mailbox 16 */
> -#define MC17 0x0002 /* Enable Mailbox 17 */
> -#define MC18 0x0004 /* Enable Mailbox 18 */
> -#define MC19 0x0008 /* Enable Mailbox 19 */
> -#define MC20 0x0010 /* Enable Mailbox 20 */
> -#define MC21 0x0020 /* Enable Mailbox 21 */
> -#define MC22 0x0040 /* Enable Mailbox 22 */
> -#define MC23 0x0080 /* Enable Mailbox 23 */
> -#define MC24 0x0100 /* Enable Mailbox 24 */
> -#define MC25 0x0200 /* Enable Mailbox 25 */
> -#define MC26 0x0400 /* Enable Mailbox 26 */
> -#define MC27 0x0800 /* Enable Mailbox 27 */
> -#define MC28 0x1000 /* Enable Mailbox 28 */
> -#define MC29 0x2000 /* Enable Mailbox 29 */
> -#define MC30 0x4000 /* Enable Mailbox 30 */
> -#define MC31 0x8000 /* Enable Mailbox 31 */
> -
> -/* CAN_MD1 Masks */
> -#define MD0 0x0001 /* Enable Mailbox 0 For Receive */
> -#define MD1 0x0002 /* Enable Mailbox 1 For Receive */
> -#define MD2 0x0004 /* Enable Mailbox 2 For Receive */
> -#define MD3 0x0008 /* Enable Mailbox 3 For Receive */
> -#define MD4 0x0010 /* Enable Mailbox 4 For Receive */
> -#define MD5 0x0020 /* Enable Mailbox 5 For Receive */
> -#define MD6 0x0040 /* Enable Mailbox 6 For Receive */
> -#define MD7 0x0080 /* Enable Mailbox 7 For Receive */
> -#define MD8 0x0100 /* Enable Mailbox 8 For Receive */
> -#define MD9 0x0200 /* Enable Mailbox 9 For Receive */
> -#define MD10 0x0400 /* Enable Mailbox 10 For Receive */
> -#define MD11 0x0800 /* Enable Mailbox 11 For Receive */
> -#define MD12 0x1000 /* Enable Mailbox 12 For Receive */
> -#define MD13 0x2000 /* Enable Mailbox 13 For Receive */
> -#define MD14 0x4000 /* Enable Mailbox 14 For Receive */
> -#define MD15 0x8000 /* Enable Mailbox 15 For Receive */
> -
> -/* CAN_MD2 Masks */
> -#define MD16 0x0001 /* Enable Mailbox 16 For Receive */
> -#define MD17 0x0002 /* Enable Mailbox 17 For Receive */
> -#define MD18 0x0004 /* Enable Mailbox 18 For Receive */
> -#define MD19 0x0008 /* Enable Mailbox 19 For Receive */
> -#define MD20 0x0010 /* Enable Mailbox 20 For Receive */
> -#define MD21 0x0020 /* Enable Mailbox 21 For Receive */
> -#define MD22 0x0040 /* Enable Mailbox 22 For Receive */
> -#define MD23 0x0080 /* Enable Mailbox 23 For Receive */
> -#define MD24 0x0100 /* Enable Mailbox 24 For Receive */
> -#define MD25 0x0200 /* Enable Mailbox 25 For Receive */
> -#define MD26 0x0400 /* Enable Mailbox 26 For Receive */
> -#define MD27 0x0800 /* Enable Mailbox 27 For Receive */
> -#define MD28 0x1000 /* Enable Mailbox 28 For Receive */
> -#define MD29 0x2000 /* Enable Mailbox 29 For Receive */
> -#define MD30 0x4000 /* Enable Mailbox 30 For Receive */
> -#define MD31 0x8000 /* Enable Mailbox 31 For Receive */
> -
> -/* CAN_RMP1 Masks */
> -#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */
> -#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */
> -#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */
> -#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */
> -#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */
> -#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */
> -#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */
> -#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */
> -#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */
> -#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */
> -#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */
> -#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */
> -#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */
> -#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */
> -#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */
> -#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */
> -
> -/* CAN_RMP2 Masks */
> -#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */
> -#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */
> -#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */
> -#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */
> -#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */
> -#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */
> -#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */
> -#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */
> -#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */
> -#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */
> -#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */
> -#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */
> -#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */
> -#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */
> -#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */
> -#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */
> -
> -/* CAN_RML1 Masks */
> -#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */
> -#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */
> -#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */
> -#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */
> -#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */
> -#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */
> -#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */
> -#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */
> -#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */
> -#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */
> -#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */
> -#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */
> -#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */
> -#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */
> -#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */
> -#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */
> -
> -/* CAN_RML2 Masks */
> -#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */
> -#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */
> -#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */
> -#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */
> -#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */
> -#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */
> -#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */
> -#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */
> -#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */
> -#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */
> -#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */
> -#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */
> -#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */
> -#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */
> -#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */
> -#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */
> -
> -/* CAN_OPSS1 Masks */
> -#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
> -#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
> -#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
> -#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
> -#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
> -#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
> -#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
> -#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
> -#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
> -#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
> -#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
> -#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
> -#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
> -#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
> -#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
> -#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
> -
> -/* CAN_OPSS2 Masks */
> -#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
> -#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
> -#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
> -#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
> -#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
> -#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
> -#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
> -#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
> -#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
> -#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
> -#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
> -#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
> -#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
> -#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
> -#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
> -#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
> -
> -/* CAN_TRR1 Masks */
> -#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */
> -#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */
> -#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */
> -#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */
> -#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */
> -#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */
> -#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */
> -#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */
> -#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */
> -#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */
> -#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */
> -#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */
> -#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */
> -#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */
> -#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */
> -#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */
> -
> -/* CAN_TRR2 Masks */
> -#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */
> -#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */
> -#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */
> -#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */
> -#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */
> -#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */
> -#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */
> -#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */
> -#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */
> -#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */
> -#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */
> -#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */
> -#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */
> -#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */
> -#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */
> -#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */
> -
> -/* CAN_TRS1 Masks */
> -#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */
> -#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */
> -#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */
> -#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */
> -#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */
> -#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */
> -#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */
> -#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */
> -#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */
> -#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */
> -#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */
> -#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */
> -#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */
> -#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */
> -#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */
> -#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */
> -
> -/* CAN_TRS2 Masks */
> -#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */
> -#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */
> -#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */
> -#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */
> -#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */
> -#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */
> -#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */
> -#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */
> -#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */
> -#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */
> -#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */
> -#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */
> -#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */
> -#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */
> -#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */
> -#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */
> -
> -/* CAN_AA1 Masks */
> -#define AA0 0x0001 /* Aborted Message In Mailbox 0 */
> -#define AA1 0x0002 /* Aborted Message In Mailbox 1 */
> -#define AA2 0x0004 /* Aborted Message In Mailbox 2 */
> -#define AA3 0x0008 /* Aborted Message In Mailbox 3 */
> -#define AA4 0x0010 /* Aborted Message In Mailbox 4 */
> -#define AA5 0x0020 /* Aborted Message In Mailbox 5 */
> -#define AA6 0x0040 /* Aborted Message In Mailbox 6 */
> -#define AA7 0x0080 /* Aborted Message In Mailbox 7 */
> -#define AA8 0x0100 /* Aborted Message In Mailbox 8 */
> -#define AA9 0x0200 /* Aborted Message In Mailbox 9 */
> -#define AA10 0x0400 /* Aborted Message In Mailbox 10 */
> -#define AA11 0x0800 /* Aborted Message In Mailbox 11 */
> -#define AA12 0x1000 /* Aborted Message In Mailbox 12 */
> -#define AA13 0x2000 /* Aborted Message In Mailbox 13 */
> -#define AA14 0x4000 /* Aborted Message In Mailbox 14 */
> -#define AA15 0x8000 /* Aborted Message In Mailbox 15 */
> -
> -/* CAN_AA2 Masks */
> -#define AA16 0x0001 /* Aborted Message In Mailbox 16 */
> -#define AA17 0x0002 /* Aborted Message In Mailbox 17 */
> -#define AA18 0x0004 /* Aborted Message In Mailbox 18 */
> -#define AA19 0x0008 /* Aborted Message In Mailbox 19 */
> -#define AA20 0x0010 /* Aborted Message In Mailbox 20 */
> -#define AA21 0x0020 /* Aborted Message In Mailbox 21 */
> -#define AA22 0x0040 /* Aborted Message In Mailbox 22 */
> -#define AA23 0x0080 /* Aborted Message In Mailbox 23 */
> -#define AA24 0x0100 /* Aborted Message In Mailbox 24 */
> -#define AA25 0x0200 /* Aborted Message In Mailbox 25 */
> -#define AA26 0x0400 /* Aborted Message In Mailbox 26 */
> -#define AA27 0x0800 /* Aborted Message In Mailbox 27 */
> -#define AA28 0x1000 /* Aborted Message In Mailbox 28 */
> -#define AA29 0x2000 /* Aborted Message In Mailbox 29 */
> -#define AA30 0x4000 /* Aborted Message In Mailbox 30 */
> -#define AA31 0x8000 /* Aborted Message In Mailbox 31 */
> -
> -/* CAN_TA1 Masks */
> -#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */
> -#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */
> -#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */
> -#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */
> -#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */
> -#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */
> -#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */
> -#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */
> -#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */
> -#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */
> -#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */
> -#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */
> -#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */
> -#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */
> -#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */
> -#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */
> -
> -/* CAN_TA2 Masks */
> -#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */
> -#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */
> -#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */
> -#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */
> -#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */
> -#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */
> -#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */
> -#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */
> -#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */
> -#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */
> -#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */
> -#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */
> -#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */
> -#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */
> -#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */
> -#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */
> -
> -/* CAN_MBTD Masks */
> -#define TDPTR 0x001F /* Mailbox To Temporarily Disable */
> -#define TDA 0x0040 /* Temporary Disable Acknowledge */
> -#define TDR 0x0080 /* Temporary Disable Request */
> -
> -/* CAN_RFH1 Masks */
> -#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */
> -#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */
> -#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */
> -#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */
> -#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */
> -#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */
> -#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */
> -#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */
> -#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */
> -#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */
> -#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */
> -#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */
> -#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */
> -#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */
> -#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */
> -#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */
> -
> -/* CAN_RFH2 Masks */
> -#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */
> -#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */
> -#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */
> -#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */
> -#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */
> -#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */
> -#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */
> -#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */
> -#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */
> -#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */
> -#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */
> -#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */
> -#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */
> -#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */
> -#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */
> -#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */
> -
> -/* CAN_MBTIF1 Masks */
> -#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */
> -#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */
> -#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */
> -#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */
> -#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */
> -#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */
> -#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */
> -#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */
> -#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */
> -#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */
> -#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */
> -#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */
> -#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */
> -#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */
> -#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */
> -#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */
> -
> -/* CAN_MBTIF2 Masks */
> -#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */
> -#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */
> -#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */
> -#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */
> -#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */
> -#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */
> -#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */
> -#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */
> -#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */
> -#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */
> -#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */
> -#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */
> -#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */
> -#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */
> -#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */
> -#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */
> -
> -/* CAN_MBRIF1 Masks */
> -#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */
> -#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */
> -#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */
> -#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */
> -#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */
> -#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */
> -#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */
> -#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */
> -#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */
> -#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */
> -#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */
> -#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */
> -#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */
> -#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */
> -#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */
> -#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */
> -
> -/* CAN_MBRIF2 Masks */
> -#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */
> -#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */
> -#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */
> -#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */
> -#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */
> -#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */
> -#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */
> -#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */
> -#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */
> -#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */
> -#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */
> -#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */
> -#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */
> -#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */
> -#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */
> -#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */
> -
> -/* CAN_MBIM1 Masks */
> -#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */
> -#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */
> -#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */
> -#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */
> -#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */
> -#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */
> -#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */
> -#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */
> -#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */
> -#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */
> -#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */
> -#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */
> -#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */
> -#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */
> -#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */
> -#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */
> -
> -/* CAN_MBIM2 Masks */
> -#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */
> -#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */
> -#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */
> -#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */
> -#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */
> -#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */
> -#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */
> -#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */
> -#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */
> -#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */
> -#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */
> -#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */
> -#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */
> -#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */
> -#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */
> -#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */
> -
> -/* CAN_GIM Masks */
> -#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */
> -#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */
> -#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */
> -#define BOIM 0x0008 /* Enable Bus Off Interrupt */
> -#define WUIM 0x0010 /* Enable Wake-Up Interrupt */
> -#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */
> -#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */
> -#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */
> -#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */
> -#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */
> -#define ADIM 0x0400 /* Enable Access Denied Interrupt */
> -
> -/* CAN_GIS Masks */
> -#define EWTIS 0x0001 /* TX Error Count IRQ Status */
> -#define EWRIS 0x0002 /* RX Error Count IRQ Status */
> -#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */
> -#define BOIS 0x0008 /* Bus Off IRQ Status */
> -#define WUIS 0x0010 /* Wake-Up IRQ Status */
> -#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */
> -#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */
> -#define RMLIS 0x0080 /* RX Message Lost IRQ Status */
> -#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */
> -#define EXTIS 0x0200 /* External Trigger Output IRQ Status */
> -#define ADIS 0x0400 /* Access Denied IRQ Status */
> -
> -/* CAN_GIF Masks */
> -#define EWTIF 0x0001 /* TX Error Count IRQ Flag */
> -#define EWRIF 0x0002 /* RX Error Count IRQ Flag */
> -#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */
> -#define BOIF 0x0008 /* Bus Off IRQ Flag */
> -#define WUIF 0x0010 /* Wake-Up IRQ Flag */
> -#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */
> -#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */
> -#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */
> -#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */
> -#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */
> -#define ADIF 0x0400 /* Access Denied IRQ Flag */
> -
> -/* CAN_UCCNF Masks */
> -#define UCCNF 0x000F /* Universal Counter Mode */
> -#define UC_STAMP 0x0001 /* Timestamp Mode */
> -#define UC_WDOG 0x0002 /* Watchdog Mode */
> -#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */
> -#define UC_ERROR 0x0006 /* CAN Error Frame Count */
> -#define UC_OVER 0x0007 /* CAN Overload Frame Count */
> -#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */
> -#define UC_AA 0x0009 /* TX Abort Count */
> -#define UC_TA 0x000A /* TX Successful Count */
> -#define UC_REJECT 0x000B /* RX Message Rejected Count */
> -#define UC_RML 0x000C /* RX Message Lost Count */
> -#define UC_RX 0x000D /* Total Successful RX Messages Count */
> -#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */
> -#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */
> -#define UCRC 0x0020 /* Universal Counter Reload/Clear */
> -#define UCCT 0x0040 /* Universal Counter CAN Trigger */
> -#define UCE 0x0080 /* Universal Counter Enable */
> -
> -/* CAN_ESR Masks */
> -#define ACKE 0x0004 /* Acknowledge Error */
> -#define SER 0x0008 /* Stuff Error */
> -#define CRCE 0x0010 /* CRC Error */
> -#define SA0 0x0020 /* Stuck At Dominant Error */
> -#define BEF 0x0040 /* Bit Error Flag */
> -#define FER 0x0080 /* Form Error Flag */
> -
> -/* CAN_EWR Masks */
> -#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */
> -#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */
> -
> -#endif
> diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
> index 34c6607..f47893d 100644
> --- a/drivers/net/can/bfin_can.c
> +++ b/drivers/net/can/bfin_can.c
> @@ -20,8 +20,8 @@
> #include <linux/can/dev.h>
> #include <linux/can/error.h>
>
> -#include <asm/bfin_can.h>
> #include <asm/portmux.h>
> +#include "bfin_can.h"
>
> #define DRV_NAME "bfin_can"
> #define BFIN_CAN_TIMEOUT 100
> diff --git a/drivers/net/can/bfin_can.h b/drivers/net/can/bfin_can.h
> new file mode 100644
> index 0000000..b1492e0
> --- /dev/null
> +++ b/drivers/net/can/bfin_can.h
> @@ -0,0 +1,728 @@
> +/*
> + * bfin_can.h - interface to Blackfin CANs
> + *
> + * Copyright 2004-2009 Analog Devices Inc.
> + *
> + * Licensed under the GPL-2 or later.
> + */
> +
> +#ifndef __ASM_BFIN_CAN_H__
> +#define __ASM_BFIN_CAN_H__
> +
> +/*
> + * transmit and receive channels
> + */
> +#define TRANSMIT_CHL 24
> +#define RECEIVE_STD_CHL 0
> +#define RECEIVE_EXT_CHL 4
> +#define RECEIVE_RTR_CHL 8
> +#define RECEIVE_EXT_RTR_CHL 12
> +#define MAX_CHL_NUMBER 32
> +
> +/*
> + * All Blackfin system MMRs are padded to 32bits even if the register
> + * itself is only 16bits. So use a helper macro to streamline this.
> + */
> +#define __BFP(m) u16 m; u16 __pad_##m
> +
> +/*
> + * bfin can registers layout
> + */
> +struct bfin_can_mask_regs {
> + __BFP(aml);
> + __BFP(amh);
> +};
> +
> +struct bfin_can_channel_regs {
> + /* data[0,2,4,6] -> data{0,1,2,3} while data[1,3,5,7] is padding */
> + u16 data[8];
> + __BFP(dlc);
> + __BFP(tsv);
> + __BFP(id0);
> + __BFP(id1);
> +};
> +
> +struct bfin_can_regs {
> + /*
> + * global control and status registers
> + */
> + __BFP(mc1); /* offset 0x00 */
> + __BFP(md1); /* offset 0x04 */
> + __BFP(trs1); /* offset 0x08 */
> + __BFP(trr1); /* offset 0x0c */
> + __BFP(ta1); /* offset 0x10 */
> + __BFP(aa1); /* offset 0x14 */
> + __BFP(rmp1); /* offset 0x18 */
> + __BFP(rml1); /* offset 0x1c */
> + __BFP(mbtif1); /* offset 0x20 */
> + __BFP(mbrif1); /* offset 0x24 */
> + __BFP(mbim1); /* offset 0x28 */
> + __BFP(rfh1); /* offset 0x2c */
> + __BFP(opss1); /* offset 0x30 */
> + u32 __pad1[3];
> + __BFP(mc2); /* offset 0x40 */
> + __BFP(md2); /* offset 0x44 */
> + __BFP(trs2); /* offset 0x48 */
> + __BFP(trr2); /* offset 0x4c */
> + __BFP(ta2); /* offset 0x50 */
> + __BFP(aa2); /* offset 0x54 */
> + __BFP(rmp2); /* offset 0x58 */
> + __BFP(rml2); /* offset 0x5c */
> + __BFP(mbtif2); /* offset 0x60 */
> + __BFP(mbrif2); /* offset 0x64 */
> + __BFP(mbim2); /* offset 0x68 */
> + __BFP(rfh2); /* offset 0x6c */
> + __BFP(opss2); /* offset 0x70 */
> + u32 __pad2[3];
> + __BFP(clock); /* offset 0x80 */
> + __BFP(timing); /* offset 0x84 */
> + __BFP(debug); /* offset 0x88 */
> + __BFP(status); /* offset 0x8c */
> + __BFP(cec); /* offset 0x90 */
> + __BFP(gis); /* offset 0x94 */
> + __BFP(gim); /* offset 0x98 */
> + __BFP(gif); /* offset 0x9c */
> + __BFP(control); /* offset 0xa0 */
> + __BFP(intr); /* offset 0xa4 */
> + __BFP(version); /* offset 0xa8 */
> + __BFP(mbtd); /* offset 0xac */
> + __BFP(ewr); /* offset 0xb0 */
> + __BFP(esr); /* offset 0xb4 */
> + u32 __pad3[2];
> + __BFP(ucreg); /* offset 0xc0 */
> + __BFP(uccnt); /* offset 0xc4 */
> + __BFP(ucrc); /* offset 0xc8 */
> + __BFP(uccnf); /* offset 0xcc */
> + u32 __pad4[1];
> + __BFP(version2); /* offset 0xd4 */
> + u32 __pad5[10];
> +
> + /*
> + * channel(mailbox) mask and message registers
> + */
> + struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */
> + struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */
> +};
> +
> +#undef __BFP
> +
> +/* CAN_CONTROL Masks */
> +#define SRS 0x0001 /* Software Reset */
> +#define DNM 0x0002 /* Device Net Mode */
> +#define ABO 0x0004 /* Auto-Bus On Enable */
> +#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */
> +#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */
> +#define SMR 0x0020 /* Sleep Mode Request */
> +#define CSR 0x0040 /* CAN Suspend Mode Request */
> +#define CCR 0x0080 /* CAN Configuration Mode Request */
> +
> +/* CAN_STATUS Masks */
> +#define WT 0x0001 /* TX Warning Flag */
> +#define WR 0x0002 /* RX Warning Flag */
> +#define EP 0x0004 /* Error Passive Mode */
> +#define EBO 0x0008 /* Error Bus Off Mode */
> +#define SMA 0x0020 /* Sleep Mode Acknowledge */
> +#define CSA 0x0040 /* Suspend Mode Acknowledge */
> +#define CCA 0x0080 /* Configuration Mode Acknowledge */
> +#define MBPTR 0x1F00 /* Mailbox Pointer */
> +#define TRM 0x4000 /* Transmit Mode */
> +#define REC 0x8000 /* Receive Mode */
> +
> +/* CAN_CLOCK Masks */
> +#define BRP 0x03FF /* Bit-Rate Pre-Scaler */
> +
> +/* CAN_TIMING Masks */
> +#define TSEG1 0x000F /* Time Segment 1 */
> +#define TSEG2 0x0070 /* Time Segment 2 */
> +#define SAM 0x0080 /* Sampling */
> +#define SJW 0x0300 /* Synchronization Jump Width */
> +
> +/* CAN_DEBUG Masks */
> +#define DEC 0x0001 /* Disable CAN Error Counters */
> +#define DRI 0x0002 /* Disable CAN RX Input */
> +#define DTO 0x0004 /* Disable CAN TX Output */
> +#define DIL 0x0008 /* Disable CAN Internal Loop */
> +#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */
> +#define MRB 0x0020 /* Mode Read Back Enable */
> +#define CDE 0x8000 /* CAN Debug Enable */
> +
> +/* CAN_CEC Masks */
> +#define RXECNT 0x00FF /* Receive Error Counter */
> +#define TXECNT 0xFF00 /* Transmit Error Counter */
> +
> +/* CAN_INTR Masks */
> +#define MBRIRQ 0x0001 /* Mailbox Receive Interrupt */
> +#define MBTIRQ 0x0002 /* Mailbox Transmit Interrupt */
> +#define GIRQ 0x0004 /* Global Interrupt */
> +#define SMACK 0x0008 /* Sleep Mode Acknowledge */
> +#define CANTX 0x0040 /* CAN TX Bus Value */
> +#define CANRX 0x0080 /* CAN RX Bus Value */
> +
> +/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */
> +#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */
> +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */
> +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */
> +#define BASEID 0x1FFC /* Base Identifier */
> +#define IDE 0x2000 /* Identifier Extension */
> +#define RTR 0x4000 /* Remote Frame Transmission Request */
> +#define AME 0x8000 /* Acceptance Mask Enable */
> +
> +/* CAN_MBxx_TIMESTAMP Masks */
> +#define TSV 0xFFFF /* Timestamp */
> +
> +/* CAN_MBxx_LENGTH Masks */
> +#define DLC 0x000F /* Data Length Code */
> +
> +/* CAN_AMxxH and CAN_AMxxL Masks */
> +#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */
> +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */
> +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */
> +#define BASEID 0x1FFC /* Base Identifier */
> +#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */
> +#define FMD 0x4000 /* Full Mask Data Field Enable */
> +#define FDF 0x8000 /* Filter On Data Field Enable */
> +
> +/* CAN_MC1 Masks */
> +#define MC0 0x0001 /* Enable Mailbox 0 */
> +#define MC1 0x0002 /* Enable Mailbox 1 */
> +#define MC2 0x0004 /* Enable Mailbox 2 */
> +#define MC3 0x0008 /* Enable Mailbox 3 */
> +#define MC4 0x0010 /* Enable Mailbox 4 */
> +#define MC5 0x0020 /* Enable Mailbox 5 */
> +#define MC6 0x0040 /* Enable Mailbox 6 */
> +#define MC7 0x0080 /* Enable Mailbox 7 */
> +#define MC8 0x0100 /* Enable Mailbox 8 */
> +#define MC9 0x0200 /* Enable Mailbox 9 */
> +#define MC10 0x0400 /* Enable Mailbox 10 */
> +#define MC11 0x0800 /* Enable Mailbox 11 */
> +#define MC12 0x1000 /* Enable Mailbox 12 */
> +#define MC13 0x2000 /* Enable Mailbox 13 */
> +#define MC14 0x4000 /* Enable Mailbox 14 */
> +#define MC15 0x8000 /* Enable Mailbox 15 */
> +
> +/* CAN_MC2 Masks */
> +#define MC16 0x0001 /* Enable Mailbox 16 */
> +#define MC17 0x0002 /* Enable Mailbox 17 */
> +#define MC18 0x0004 /* Enable Mailbox 18 */
> +#define MC19 0x0008 /* Enable Mailbox 19 */
> +#define MC20 0x0010 /* Enable Mailbox 20 */
> +#define MC21 0x0020 /* Enable Mailbox 21 */
> +#define MC22 0x0040 /* Enable Mailbox 22 */
> +#define MC23 0x0080 /* Enable Mailbox 23 */
> +#define MC24 0x0100 /* Enable Mailbox 24 */
> +#define MC25 0x0200 /* Enable Mailbox 25 */
> +#define MC26 0x0400 /* Enable Mailbox 26 */
> +#define MC27 0x0800 /* Enable Mailbox 27 */
> +#define MC28 0x1000 /* Enable Mailbox 28 */
> +#define MC29 0x2000 /* Enable Mailbox 29 */
> +#define MC30 0x4000 /* Enable Mailbox 30 */
> +#define MC31 0x8000 /* Enable Mailbox 31 */
> +
> +/* CAN_MD1 Masks */
> +#define MD0 0x0001 /* Enable Mailbox 0 For Receive */
> +#define MD1 0x0002 /* Enable Mailbox 1 For Receive */
> +#define MD2 0x0004 /* Enable Mailbox 2 For Receive */
> +#define MD3 0x0008 /* Enable Mailbox 3 For Receive */
> +#define MD4 0x0010 /* Enable Mailbox 4 For Receive */
> +#define MD5 0x0020 /* Enable Mailbox 5 For Receive */
> +#define MD6 0x0040 /* Enable Mailbox 6 For Receive */
> +#define MD7 0x0080 /* Enable Mailbox 7 For Receive */
> +#define MD8 0x0100 /* Enable Mailbox 8 For Receive */
> +#define MD9 0x0200 /* Enable Mailbox 9 For Receive */
> +#define MD10 0x0400 /* Enable Mailbox 10 For Receive */
> +#define MD11 0x0800 /* Enable Mailbox 11 For Receive */
> +#define MD12 0x1000 /* Enable Mailbox 12 For Receive */
> +#define MD13 0x2000 /* Enable Mailbox 13 For Receive */
> +#define MD14 0x4000 /* Enable Mailbox 14 For Receive */
> +#define MD15 0x8000 /* Enable Mailbox 15 For Receive */
> +
> +/* CAN_MD2 Masks */
> +#define MD16 0x0001 /* Enable Mailbox 16 For Receive */
> +#define MD17 0x0002 /* Enable Mailbox 17 For Receive */
> +#define MD18 0x0004 /* Enable Mailbox 18 For Receive */
> +#define MD19 0x0008 /* Enable Mailbox 19 For Receive */
> +#define MD20 0x0010 /* Enable Mailbox 20 For Receive */
> +#define MD21 0x0020 /* Enable Mailbox 21 For Receive */
> +#define MD22 0x0040 /* Enable Mailbox 22 For Receive */
> +#define MD23 0x0080 /* Enable Mailbox 23 For Receive */
> +#define MD24 0x0100 /* Enable Mailbox 24 For Receive */
> +#define MD25 0x0200 /* Enable Mailbox 25 For Receive */
> +#define MD26 0x0400 /* Enable Mailbox 26 For Receive */
> +#define MD27 0x0800 /* Enable Mailbox 27 For Receive */
> +#define MD28 0x1000 /* Enable Mailbox 28 For Receive */
> +#define MD29 0x2000 /* Enable Mailbox 29 For Receive */
> +#define MD30 0x4000 /* Enable Mailbox 30 For Receive */
> +#define MD31 0x8000 /* Enable Mailbox 31 For Receive */
> +
> +/* CAN_RMP1 Masks */
> +#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */
> +#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */
> +#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */
> +#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */
> +#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */
> +#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */
> +#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */
> +#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */
> +#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */
> +#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */
> +#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */
> +#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */
> +#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */
> +#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */
> +#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */
> +#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */
> +
> +/* CAN_RMP2 Masks */
> +#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */
> +#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */
> +#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */
> +#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */
> +#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */
> +#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */
> +#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */
> +#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */
> +#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */
> +#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */
> +#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */
> +#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */
> +#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */
> +#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */
> +#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */
> +#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */
> +
> +/* CAN_RML1 Masks */
> +#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */
> +#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */
> +#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */
> +#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */
> +#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */
> +#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */
> +#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */
> +#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */
> +#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */
> +#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */
> +#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */
> +#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */
> +#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */
> +#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */
> +#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */
> +#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */
> +
> +/* CAN_RML2 Masks */
> +#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */
> +#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */
> +#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */
> +#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */
> +#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */
> +#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */
> +#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */
> +#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */
> +#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */
> +#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */
> +#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */
> +#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */
> +#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */
> +#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */
> +#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */
> +#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */
> +
> +/* CAN_OPSS1 Masks */
> +#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */
> +#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */
> +#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */
> +#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */
> +#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */
> +#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */
> +#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */
> +#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */
> +#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */
> +#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */
> +#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */
> +#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */
> +#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */
> +#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */
> +#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */
> +#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */
> +
> +/* CAN_OPSS2 Masks */
> +#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */
> +#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */
> +#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */
> +#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */
> +#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */
> +#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */
> +#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */
> +#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */
> +#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */
> +#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */
> +#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */
> +#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */
> +#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */
> +#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */
> +#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */
> +#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */
> +
> +/* CAN_TRR1 Masks */
> +#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */
> +#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */
> +#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */
> +#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */
> +#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */
> +#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */
> +#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */
> +#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */
> +#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */
> +#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */
> +#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */
> +#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */
> +#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */
> +#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */
> +#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */
> +#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */
> +
> +/* CAN_TRR2 Masks */
> +#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */
> +#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */
> +#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */
> +#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */
> +#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */
> +#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */
> +#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */
> +#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */
> +#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */
> +#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */
> +#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */
> +#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */
> +#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */
> +#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */
> +#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */
> +#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */
> +
> +/* CAN_TRS1 Masks */
> +#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */
> +#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */
> +#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */
> +#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */
> +#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */
> +#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */
> +#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */
> +#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */
> +#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */
> +#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */
> +#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */
> +#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */
> +#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */
> +#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */
> +#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */
> +#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */
> +
> +/* CAN_TRS2 Masks */
> +#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */
> +#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */
> +#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */
> +#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */
> +#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */
> +#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */
> +#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */
> +#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */
> +#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */
> +#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */
> +#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */
> +#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */
> +#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */
> +#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */
> +#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */
> +#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */
> +
> +/* CAN_AA1 Masks */
> +#define AA0 0x0001 /* Aborted Message In Mailbox 0 */
> +#define AA1 0x0002 /* Aborted Message In Mailbox 1 */
> +#define AA2 0x0004 /* Aborted Message In Mailbox 2 */
> +#define AA3 0x0008 /* Aborted Message In Mailbox 3 */
> +#define AA4 0x0010 /* Aborted Message In Mailbox 4 */
> +#define AA5 0x0020 /* Aborted Message In Mailbox 5 */
> +#define AA6 0x0040 /* Aborted Message In Mailbox 6 */
> +#define AA7 0x0080 /* Aborted Message In Mailbox 7 */
> +#define AA8 0x0100 /* Aborted Message In Mailbox 8 */
> +#define AA9 0x0200 /* Aborted Message In Mailbox 9 */
> +#define AA10 0x0400 /* Aborted Message In Mailbox 10 */
> +#define AA11 0x0800 /* Aborted Message In Mailbox 11 */
> +#define AA12 0x1000 /* Aborted Message In Mailbox 12 */
> +#define AA13 0x2000 /* Aborted Message In Mailbox 13 */
> +#define AA14 0x4000 /* Aborted Message In Mailbox 14 */
> +#define AA15 0x8000 /* Aborted Message In Mailbox 15 */
> +
> +/* CAN_AA2 Masks */
> +#define AA16 0x0001 /* Aborted Message In Mailbox 16 */
> +#define AA17 0x0002 /* Aborted Message In Mailbox 17 */
> +#define AA18 0x0004 /* Aborted Message In Mailbox 18 */
> +#define AA19 0x0008 /* Aborted Message In Mailbox 19 */
> +#define AA20 0x0010 /* Aborted Message In Mailbox 20 */
> +#define AA21 0x0020 /* Aborted Message In Mailbox 21 */
> +#define AA22 0x0040 /* Aborted Message In Mailbox 22 */
> +#define AA23 0x0080 /* Aborted Message In Mailbox 23 */
> +#define AA24 0x0100 /* Aborted Message In Mailbox 24 */
> +#define AA25 0x0200 /* Aborted Message In Mailbox 25 */
> +#define AA26 0x0400 /* Aborted Message In Mailbox 26 */
> +#define AA27 0x0800 /* Aborted Message In Mailbox 27 */
> +#define AA28 0x1000 /* Aborted Message In Mailbox 28 */
> +#define AA29 0x2000 /* Aborted Message In Mailbox 29 */
> +#define AA30 0x4000 /* Aborted Message In Mailbox 30 */
> +#define AA31 0x8000 /* Aborted Message In Mailbox 31 */
> +
> +/* CAN_TA1 Masks */
> +#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */
> +#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */
> +#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */
> +#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */
> +#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */
> +#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */
> +#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */
> +#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */
> +#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */
> +#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */
> +#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */
> +#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */
> +#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */
> +#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */
> +#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */
> +#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */
> +
> +/* CAN_TA2 Masks */
> +#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */
> +#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */
> +#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */
> +#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */
> +#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */
> +#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */
> +#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */
> +#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */
> +#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */
> +#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */
> +#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */
> +#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */
> +#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */
> +#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */
> +#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */
> +#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */
> +
> +/* CAN_MBTD Masks */
> +#define TDPTR 0x001F /* Mailbox To Temporarily Disable */
> +#define TDA 0x0040 /* Temporary Disable Acknowledge */
> +#define TDR 0x0080 /* Temporary Disable Request */
> +
> +/* CAN_RFH1 Masks */
> +#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */
> +#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */
> +#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */
> +#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */
> +#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */
> +#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */
> +#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */
> +#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */
> +#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */
> +#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */
> +#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */
> +#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */
> +#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */
> +#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */
> +#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */
> +#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */
> +
> +/* CAN_RFH2 Masks */
> +#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */
> +#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */
> +#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */
> +#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */
> +#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */
> +#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */
> +#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */
> +#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */
> +#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */
> +#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */
> +#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */
> +#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */
> +#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */
> +#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */
> +#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */
> +#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */
> +
> +/* CAN_MBTIF1 Masks */
> +#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */
> +#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */
> +#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */
> +#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */
> +#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */
> +#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */
> +#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */
> +#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */
> +#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */
> +#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */
> +#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */
> +#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */
> +#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */
> +#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */
> +#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */
> +#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */
> +
> +/* CAN_MBTIF2 Masks */
> +#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */
> +#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */
> +#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */
> +#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */
> +#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */
> +#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */
> +#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */
> +#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */
> +#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */
> +#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */
> +#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */
> +#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */
> +#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */
> +#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */
> +#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */
> +#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */
> +
> +/* CAN_MBRIF1 Masks */
> +#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */
> +#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */
> +#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */
> +#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */
> +#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */
> +#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */
> +#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */
> +#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */
> +#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */
> +#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */
> +#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */
> +#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */
> +#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */
> +#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */
> +#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */
> +#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */
> +
> +/* CAN_MBRIF2 Masks */
> +#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */
> +#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */
> +#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */
> +#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */
> +#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */
> +#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */
> +#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */
> +#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */
> +#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */
> +#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */
> +#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */
> +#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */
> +#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */
> +#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */
> +#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */
> +#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */
> +
> +/* CAN_MBIM1 Masks */
> +#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */
> +#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */
> +#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */
> +#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */
> +#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */
> +#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */
> +#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */
> +#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */
> +#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */
> +#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */
> +#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */
> +#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */
> +#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */
> +#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */
> +#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */
> +#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */
> +
> +/* CAN_MBIM2 Masks */
> +#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */
> +#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */
> +#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */
> +#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */
> +#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */
> +#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */
> +#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */
> +#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */
> +#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */
> +#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */
> +#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */
> +#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */
> +#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */
> +#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */
> +#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */
> +#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */
> +
> +/* CAN_GIM Masks */
> +#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */
> +#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */
> +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */
> +#define BOIM 0x0008 /* Enable Bus Off Interrupt */
> +#define WUIM 0x0010 /* Enable Wake-Up Interrupt */
> +#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */
> +#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */
> +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */
> +#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */
> +#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */
> +#define ADIM 0x0400 /* Enable Access Denied Interrupt */
> +
> +/* CAN_GIS Masks */
> +#define EWTIS 0x0001 /* TX Error Count IRQ Status */
> +#define EWRIS 0x0002 /* RX Error Count IRQ Status */
> +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */
> +#define BOIS 0x0008 /* Bus Off IRQ Status */
> +#define WUIS 0x0010 /* Wake-Up IRQ Status */
> +#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */
> +#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */
> +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */
> +#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */
> +#define EXTIS 0x0200 /* External Trigger Output IRQ Status */
> +#define ADIS 0x0400 /* Access Denied IRQ Status */
> +
> +/* CAN_GIF Masks */
> +#define EWTIF 0x0001 /* TX Error Count IRQ Flag */
> +#define EWRIF 0x0002 /* RX Error Count IRQ Flag */
> +#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */
> +#define BOIF 0x0008 /* Bus Off IRQ Flag */
> +#define WUIF 0x0010 /* Wake-Up IRQ Flag */
> +#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */
> +#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */
> +#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */
> +#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */
> +#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */
> +#define ADIF 0x0400 /* Access Denied IRQ Flag */
> +
> +/* CAN_UCCNF Masks */
> +#define UCCNF 0x000F /* Universal Counter Mode */
> +#define UC_STAMP 0x0001 /* Timestamp Mode */
> +#define UC_WDOG 0x0002 /* Watchdog Mode */
> +#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */
> +#define UC_ERROR 0x0006 /* CAN Error Frame Count */
> +#define UC_OVER 0x0007 /* CAN Overload Frame Count */
> +#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */
> +#define UC_AA 0x0009 /* TX Abort Count */
> +#define UC_TA 0x000A /* TX Successful Count */
> +#define UC_REJECT 0x000B /* RX Message Rejected Count */
> +#define UC_RML 0x000C /* RX Message Lost Count */
> +#define UC_RX 0x000D /* Total Successful RX Messages Count */
> +#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */
> +#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */
> +#define UCRC 0x0020 /* Universal Counter Reload/Clear */
> +#define UCCT 0x0040 /* Universal Counter CAN Trigger */
> +#define UCE 0x0080 /* Universal Counter Enable */
> +
> +/* CAN_ESR Masks */
> +#define ACKE 0x0004 /* Acknowledge Error */
> +#define SER 0x0008 /* Stuff Error */
> +#define CRCE 0x0010 /* CRC Error */
> +#define SA0 0x0020 /* Stuck At Dominant Error */
> +#define BEF 0x0040 /* Bit Error Flag */
> +#define FER 0x0080 /* Form Error Flag */
> +
> +/* CAN_EWR Masks */
> +#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */
> +#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */
> +
> +#endif
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Koshy George: "[PATCH] NFS: nfs4_fs.h: Fix for checkpatch warnings"
Previous message: Gregory CLEMENT: "[PATCH 3/3] ata: libahci: Allow to use multiple regulators"
In reply to: Aaron Wu: "[PATCH] bfin_can: move the header file to arch independent location"
Next in thread: Wu, Aaron: "RE: [PATCH] bfin_can: move the header file to arch independent location"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]