Re: [PATCH v6 14/17] ARM64 / ACPI: Parse GTDT to initialize arch timer
From: Suthikulpanit, Suravee
Date: Mon Jan 05 2015 - 02:55:44 EST
On 1/4/15, 04:55, "Hanjun Guo" <hanjun.guo@xxxxxxxxxx> wrote:
>Using the information presented by GTDT to initialize the arch
>timer (not memory-mapped).
>
>Originally-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
>Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
>Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
>---
> arch/arm64/kernel/time.c | 7 ++
> drivers/clocksource/arm_arch_timer.c | 132
>++++++++++++++++++++++++++++-------
> include/linux/clocksource.h | 6 ++
> 3 files changed, 118 insertions(+), 27 deletions(-)
>
>diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
>index 1a7125c..42f9195 100644
>--- a/arch/arm64/kernel/time.c
>+++ b/arch/arm64/kernel/time.c
>@@ -35,6 +35,7 @@
> #include <linux/delay.h>
> #include <linux/clocksource.h>
> #include <linux/clk-provider.h>
>+#include <linux/acpi.h>
>
> #include <clocksource/arm_arch_timer.h>
>
>@@ -72,6 +73,12 @@ void __init time_init(void)
>
> tick_setup_hrtimer_broadcast();
>
>+ /*
>+ * Since ACPI or FDT will only one be available in the system,
>+ * we can use acpi_generic_timer_init() here safely
>+ */
>+ acpi_generic_timer_init();
>+
> arch_timer_rate = arch_timer_get_rate();
> if (!arch_timer_rate)
> panic("Unable to initialise architected timer.\n");
>diff --git a/drivers/clocksource/arm_arch_timer.c
>b/drivers/clocksource/arm_arch_timer.c
>index 6a79fc4..612f2a0 100644
>--- a/drivers/clocksource/arm_arch_timer.c
>+++ b/drivers/clocksource/arm_arch_timer.c
>@@ -21,6 +21,7 @@
> #include <linux/io.h>
> #include <linux/slab.h>
> #include <linux/sched_clock.h>
>+#include <linux/acpi.h>
>
> #include <asm/arch_timer.h>
> #include <asm/virt.h>
>@@ -370,8 +371,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct
>device_node *np)
> if (arch_timer_rate)
> return;
>
>- /* Try to determine the frequency from the device tree or CNTFRQ */
>- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
>+ /*
>+ * Try to determine the frequency from the device tree or CNTFRQ,
>+ * if ACPI is enabled, get the frequency from CNTFRQ ONLY.
>+ */
>+ if (!acpi_disabled ||
>+ of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
> if (cntbase)
> arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
> else
>@@ -690,28 +695,8 @@ static void __init arch_timer_common_init(void)
> arch_timer_arch_init();
> }
>
>-static void __init arch_timer_init(struct device_node *np)
>+static void __init arch_timer_init(void)
> {
>- int i;
>-
>- if (arch_timers_present & ARCH_CP15_TIMER) {
>- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
>- return;
>- }
>-
>- arch_timers_present |= ARCH_CP15_TIMER;
>- for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
>- arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
>- arch_timer_detect_rate(NULL, np);
>-
>- /*
>- * If we cannot rely on firmware initializing the timer registers then
>- * we should use the physical timers instead.
>- */
>- if (IS_ENABLED(CONFIG_ARM) &&
>- of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
>- arch_timer_use_virtual = false;
>-
> /*
> * If HYP mode is available, we know that the physical timer
> * has been configured to be accessible from PL1. Use it, so
>@@ -730,13 +715,39 @@ static void __init arch_timer_init(struct
>device_node *np)
> }
> }
>
>- arch_timer_c3stop = !of_property_read_bool(np, "always-on");
>-
> arch_timer_register();
> arch_timer_common_init();
> }
>-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer",
>arch_timer_init);
>-CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer",
>arch_timer_init);
>+
>+static void __init arch_timer_of_init(struct device_node *np)
>+{
>+ int i;
>+
>+ if (arch_timers_present & ARCH_CP15_TIMER) {
>+ pr_warn("arch_timer: multiple nodes in dt, skipping\n");
>+ return;
>+ }
>+
>+ arch_timers_present |= ARCH_CP15_TIMER;
>+ for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
>+ arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
>+
>+ arch_timer_detect_rate(NULL, np);
>+
>+ arch_timer_c3stop = !of_property_read_bool(np, "always-on");
>+
>+ /*
>+ * If we cannot rely on firmware initializing the timer registers then
>+ * we should use the physical timers instead.
>+ */
>+ if (IS_ENABLED(CONFIG_ARM) &&
>+ of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
>+ arch_timer_use_virtual = false;
>+
>+ arch_timer_init();
>+}
>+CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer",
>arch_timer_of_init);
>+CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer",
>arch_timer_of_init);
Hanjun,
FYI, it seems that the tree that you have rebased the patch series has an
issue determining clocksource in ARM64 introduced by this commit.
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=0
b46b8a718c6e90910a1b1b0fe797be3c167e186
Here is the fix from Catalin that already went upstream:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drive
rs/clocksource/arm_arch_timer.c?id=d6ad36913083d683aad4e02e53580c995f1a6ede
Thanks,
Suravee
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/