Re: [RFC 2/2] x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader
From: Marcelo Tosatti
Date: Mon Jan 05 2015 - 17:49:26 EST
On Mon, Jan 05, 2015 at 02:38:46PM -0800, Andy Lutomirski wrote:
> On Mon, Jan 5, 2015 at 11:17 AM, Marcelo Tosatti <mtosatti@xxxxxxxxxx> wrote:
> > On Mon, Jan 05, 2015 at 10:56:07AM -0800, Andy Lutomirski wrote:
> >> On Mon, Jan 5, 2015 at 7:25 AM, Marcelo Tosatti <mtosatti@xxxxxxxxxx> wrote:
> >> > On Mon, Dec 22, 2014 at 04:39:57PM -0800, Andy Lutomirski wrote:
> >> >> The pvclock vdso code was too abstracted to understand easily and
> >> >> excessively paranoid. Simplify it for a huge speedup.
> >> >>
> >> >> This opens the door for additional simplifications, as the vdso no
> >> >> longer accesses the pvti for any vcpu other than vcpu 0.
> >> >>
> >> >> Before, vclock_gettime using kvm-clock took about 64ns on my machine.
> >> >> With this change, it takes 19ns, which is almost as fast as the pure TSC
> >> >> implementation.
> >> >>
> >> >> Signed-off-by: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
> >> >> ---
> >> >> arch/x86/vdso/vclock_gettime.c | 82 ++++++++++++++++++++++++------------------
> >> >> 1 file changed, 47 insertions(+), 35 deletions(-)
> >> >>
> >> >> diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
> >> >> index 9793322751e0..f2e0396d5629 100644
> >> >> --- a/arch/x86/vdso/vclock_gettime.c
> >> >> +++ b/arch/x86/vdso/vclock_gettime.c
> >> >> @@ -78,47 +78,59 @@ static notrace const struct pvclock_vsyscall_time_info *get_pvti(int cpu)
> >> >>
> >> >> static notrace cycle_t vread_pvclock(int *mode)
> >> >> {
> >> >> - const struct pvclock_vsyscall_time_info *pvti;
> >> >> + const struct pvclock_vcpu_time_info *pvti = &get_pvti(0)->pvti;
> >> >> cycle_t ret;
> >> >> - u64 last;
> >> >> - u32 version;
> >> >> - u8 flags;
> >> >> - unsigned cpu, cpu1;
> >> >> -
> >> >> + u64 tsc, pvti_tsc;
> >> >> + u64 last, delta, pvti_system_time;
> >> >> + u32 version, pvti_tsc_to_system_mul, pvti_tsc_shift;
> >> >>
> >> >> /*
> >> >> - * Note: hypervisor must guarantee that:
> >> >> - * 1. cpu ID number maps 1:1 to per-CPU pvclock time info.
> >> >> - * 2. that per-CPU pvclock time info is updated if the
> >> >> - * underlying CPU changes.
> >> >> - * 3. that version is increased whenever underlying CPU
> >> >> - * changes.
> >> >> + * Note: The kernel and hypervisor must guarantee that cpu ID
> >> >> + * number maps 1:1 to per-CPU pvclock time info.
> >> >> + *
> >> >> + * Because the hypervisor is entirely unaware of guest userspace
> >> >> + * preemption, it cannot guarantee that per-CPU pvclock time
> >> >> + * info is updated if the underlying CPU changes or that that
> >> >> + * version is increased whenever underlying CPU changes.
> >> >> + *
> >> >> + * On KVM, we are guaranteed that pvti updates for any vCPU are
> >> >> + * atomic as seen by *all* vCPUs. This is an even stronger
> >> >> + * guarantee than we get with a normal seqlock.
> >> >> *
> >> >> + * On Xen, we don't appear to have that guarantee, but Xen still
> >> >> + * supplies a valid seqlock using the version field.
> >> >> +
> >> >> + * We only do pvclock vdso timing at all if
> >> >> + * PVCLOCK_TSC_STABLE_BIT is set, and we interpret that bit to
> >> >> + * mean that all vCPUs have matching pvti and that the TSC is
> >> >> + * synced, so we can just look at vCPU 0's pvti.
> >> >> */
> >> >
> >> > Can Xen guarantee that ?
> >>
> >> I think so, vacuously. Xen doesn't seem to set PVCLOCK_TSC_STABLE_BIT
> >> at all. I have no idea going forward, though.
> >>
> >> Xen people?
> >>
> >> >
> >> >> - do {
> >> >> - cpu = __getcpu() & VGETCPU_CPU_MASK;
> >> >> - /* TODO: We can put vcpu id into higher bits of pvti.version.
> >> >> - * This will save a couple of cycles by getting rid of
> >> >> - * __getcpu() calls (Gleb).
> >> >> - */
> >> >> -
> >> >> - pvti = get_pvti(cpu);
> >> >> -
> >> >> - version = __pvclock_read_cycles(&pvti->pvti, &ret, &flags);
> >> >> -
> >> >> - /*
> >> >> - * Test we're still on the cpu as well as the version.
> >> >> - * We could have been migrated just after the first
> >> >> - * vgetcpu but before fetching the version, so we
> >> >> - * wouldn't notice a version change.
> >> >> - */
> >> >> - cpu1 = __getcpu() & VGETCPU_CPU_MASK;
> >> >> - } while (unlikely(cpu != cpu1 ||
> >> >> - (pvti->pvti.version & 1) ||
> >> >> - pvti->pvti.version != version));
> >> >> -
> >> >> - if (unlikely(!(flags & PVCLOCK_TSC_STABLE_BIT)))
> >> >> +
> >> >> + if (unlikely(!(pvti->flags & PVCLOCK_TSC_STABLE_BIT))) {
> >> >> *mode = VCLOCK_NONE;
> >> >> + return 0;
> >> >> + }
> >> >
> >> > This check must be performed after reading a stable pvti.
> >> >
> >>
> >> We can even read it in the middle, guarded by the version checks.
> >> I'll do that for v2.
> >>
> >> >> +
> >> >> + do {
> >> >> + version = pvti->version;
> >> >> +
> >> >> + /* This is also a read barrier, so we'll read version first. */
> >> >> + rdtsc_barrier();
> >> >> + tsc = __native_read_tsc();
> >> >> +
> >> >> + pvti_tsc_to_system_mul = pvti->tsc_to_system_mul;
> >> >> + pvti_tsc_shift = pvti->tsc_shift;
> >> >> + pvti_system_time = pvti->system_time;
> >> >> + pvti_tsc = pvti->tsc_timestamp;
> >> >> +
> >> >> + /* Make sure that the version double-check is last. */
> >> >> + smp_rmb();
> >> >> + } while (unlikely((version & 1) || version != pvti->version));
> >> >> +
> >> >> + delta = tsc - pvti_tsc;
> >> >> + ret = pvti_system_time +
> >> >> + pvclock_scale_delta(delta, pvti_tsc_to_system_mul,
> >> >> + pvti_tsc_shift);
> >> >
> >> > The following is possible:
> >> >
> >> > 1) State: all pvtis marked as PVCLOCK_TSC_STABLE_BIT.
> >> > 1) Update request for all vcpus, for a TSC_STABLE_BIT -> ~TSC_STABLE_BIT
> >> > transition.
> >> > 2) vCPU-1 updates its pvti with new values.
> >> > 3) vCPU-0 still has not updated its pvti with new values.
> >> > 4) vCPU-1 VM-enters, uses vCPU-0 values, even though it has been
> >> > notified of a TSC_STABLE_BIT -> ~TSC_STABLE_BIT transition.
> >> >
> >> > The update is not actually atomic across all vCPUs, its atomic in
> >> > the sense of not allowing visibility of distinct
> >> > system_timestamp/tsc_timestamp values.
> >> >
> >>
> >> Hmm. In step 4, is there a guarantee that vCPU-0 won't VM-enter until
> >> it gets marked unstable?
> >
> > Yes. It will VM-enter after pvti is updated.
> >
> >> Otherwise the vdso could could just as
> >> easily be called from vCPU-1, migrated to vCPU-0, read the data
> >> complete with stale stable bit, and get migrated back to vCPU-1.
> >
> > Right.
> >
> >> But I thought that KVM currently froze all vCPUs when updating pvti
> >> for any of them. How can this happen? I admit I don't really
> >> understand the update request code.
> >
> > The update is performed as follows:
> >
> > - Stop guest instruction execution on every vCPU, parking them in the host.
> > - Request KVMCLOCK update for every vCPU.
> > - Resume guest instruction execution.
> >
> > The KVMCLOCK update (==pvti update) is guaranteed to be performed before
> > guest instructions are executed again.
> >
> > But there is no guarantee that vCPU-N has updated its pvti when
> > vCPU-M resumes guest instruction execution.
>
> Still confused. So we can freeze all vCPUs in the host, then update
> pvti 1, then resume vCPU 1, then update pvti 0? In that case, we have
> a problem, because vCPU 1 can observe pvti 0 mid-update, and KVM
> doesn't increment the version pre-update, and we can return completely
> bogus results.
Yes.
> > So the cost this patch removes is mainly from __getcpu (==RDTSCP?) ?
>
> It removes a whole bunch of code, an extra barrier, and two __getcpus.
>
> > Perhaps you can use Gleb's idea to stick vcpu id into version field ?
>
> I don't understand how that's useful at all. If you're reading pvti,
> you clearly know the vcpu id.
Replace the return value of __getcpus by value read from pvti.version.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/