Re: [PATCH] dmaengine: qcom_bam_dma: add one more optional clock

[Stanimir Varbanov]

Hi Andy,

On 09/07/2014 08:55 PM, Stanimir Varbanov wrote:
> The BAM is tightly coupled with the peripheral to which it
> belongs. In that sprit to access the BAM configuration
> registers the driver needs to enable some peripheral
> clocks. Currently the DT node enables bamclk which seems
> is not enough for some peripherals (for example the crypto
> engine wants core and iface clocks). This change attempts
> to solve this issue by adding one more optional clock
> in bam_dma driver.
> 

What is your opinion on this patch?

> Signed-off-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/dma/qcom_bam_dma.txt       | 12 ++++--
>  drivers/dma/qcom_bam_dma.c                         | 44 +++++++++++++++-------
>  2 files changed, 38 insertions(+), 18 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> index d75a9d7..2376897 100644
> --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> @@ -6,8 +6,11 @@ Required properties:
>  - interrupts: Should contain the one interrupt shared by all channels
>  - #dma-cells: must be <1>, the cell in the dmas property of the client device
>    represents the channel number
> -- clocks: required clock
> -- clock-names: must contain "bam_clk" entry
> +- clocks: list of required clock plus one optional clock. The optional clock
> +          is needed for some peripherals and can be omitted.
> +- clock-names: must contain "core" clock name representing the required clock
> +               plus the optional "iface" clock name depending on
> +               peripheral needs.
>  - qcom,ee : indicates the active Execution Environment identifier (0-7) used in
>    the secure world.
>  
> @@ -17,8 +20,9 @@ Example:
>  		compatible = "qcom,bam-v1.4.0";
>  		reg = <0xf9984000 0x15000>;
>  		interrupts = <0 94 0>;
> -		clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
> -		clock-names = "bam_clk";
> +		clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
> +			 <&gcc GCC_BLSP1_AHB_CLK>;
> +		clock-names = "core", "iface";
>  		#dma-cells = <1>;
>  		qcom,ee = <0>;
>  	};



-- 
regards,
Stan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/