Re: [PATCH v3 2/2] powerpc/8xx: use _PAGE_RO instead of _PAGE_RW

[Scott Wood]

On Tue, 2015-01-06 at 08:03 +0100, leroy christophe wrote:
> Le 05/01/2015 19:12, Joakim Tjernlund a Ãcrit :
> > On Mon, 2014-12-22 at 11:14 +0100, Christophe Leroy wrote:
> >> On powerpc 8xx, in TLB entries, 0x400 bit is set to 1 for read-only pages
> >> and is set to 0 for RW pages. So we should use _PAGE_RO instead of _PAGE_RW
> >>
> >> Signed-off-by: Christophe Leroy <christophe.leroy@xxxxxx>
> > Hi Christophe, been meaning to look over all you recent 8xx MMU/TLB patches
> > but got so little time :(
> >
> > This is very cool (not sure if there will be a performance gain)  but ..
> I think every saved cycle is worth it.
> Before I did any modification:
> * ITLBMiss was 28 instructions.
> * DTLBMiss was 32 instructions.
> Now, (No MODULES, no CPU6, no CPU15):
> * ITLBMiss is 15 instructions
> * DTLBMiss is 24 instructions
> >>
> >>
> >> diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
> >> index caf094a..b4e0c3b 100644
> >> --- a/arch/powerpc/include/asm/pgtable-ppc32.h
> >> +++ b/arch/powerpc/include/asm/pgtable-ppc32.h
> >> @@ -178,9 +178,10 @@ static inline unsigned long pte_update(pte_t *p,
> >>          andc    %1,%0,%5\n\
> >>          or      %1,%1,%6\n\
> >>          /* 0x200 == Extended encoding, bit 22 */ \
> >> -       /* Bit 22 has to be 1 if neither _PAGE_USER nor _PAGE_RW are set */ \
> >> +       /* Bit 22 has to be 1 when _PAGE_USER is unset and _PAGE_RO is set */ \
> >>          rlwimi  %1,%1,32-2,0x200\n /* get _PAGE_USER */ \
> >> -       rlwinm  %3,%1,32-1,0x200\n /* get _PAGE_RW */ \
> >> +       rlwinm  %3,%1,32-1,0x200\n /* get _PAGE_RO */ \
> >> +       xori    %3,%3,0x200\n \
> >>          or      %1,%3,%1\n\
> >>          xori    %1,%1,0x200\n"
> >>   "      stwcx.  %1,0,%4\n\
> > ... here I expected to loose the existing xori insn instead of adding one?
> >
> >
> Well, I could have xored the PAGE_USER bit instead, but in that case, it 
> is not anymore an 'or' but an 'and' that has to be performed between the 
> bits, and then all other bits must be set to 1, or the result of the 
> 'and' shall be inserted using 'rlwimi'. So it would be more 
> modifications than just adding an xori, and not less instructions.

How about "andc %3,%3,%1; rlwimi %1,%3,0,0x200" instead of the "xori,
or, xori" sequence?

-Scott


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/