Re: [PATCH v2 2/3] ARM: dts: berlin: add PPI cpu mask to twd timer interrupts

[Sebastian Hesselbarth]

On 26.12.2014 09:58, Jisheng Zhang wrote:
> According to the gic binding document, "bits[15:8] PPI interrupt cpu
> mask.  Each bit corresponds to each of the 8 possible cpus attached to
> the GIC.  A bit set to '1' indicated the interrupt is wired to that
> CPU." This patch wants to add the PPI cpu mask for completeness.
>
> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>

Applied to berlin/dt.

Thanks!

> ---
>   arch/arm/boot/dts/berlin2.dtsi   | 2 +-
>   arch/arm/boot/dts/berlin2cd.dtsi | 2 +-
>   arch/arm/boot/dts/berlin2q.dtsi  | 2 +-
>   3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
> index 015a06c..63d00a6 100644
> --- a/arch/arm/boot/dts/berlin2.dtsi
> +++ b/arch/arm/boot/dts/berlin2.dtsi
> @@ -104,7 +104,7 @@
>   		local-timer@ad0600 {
>   			compatible = "arm,cortex-a9-twd-timer";
>   			reg = <0xad0600 0x20>;
> -			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
>   			clocks = <&chip CLKID_TWD>;
>   		};
>
> diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
> index a318bc3..81b670a 100644
> --- a/arch/arm/boot/dts/berlin2cd.dtsi
> +++ b/arch/arm/boot/dts/berlin2cd.dtsi
> @@ -76,7 +76,7 @@
>   		local-timer@ad0600 {
>   			compatible = "arm,cortex-a9-twd-timer";
>   			reg = <0xad0600 0x20>;
> -			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
>   			clocks = <&chip CLKID_TWD>;
>   		};
>
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 933dcbb..41a683f 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -112,7 +112,7 @@
>   			compatible = "arm,cortex-a9-twd-timer";
>   			reg = <0xad0600 0x20>;
>   			clocks = <&chip CLKID_TWD>;
> -			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>   		};
>
>   		gic: interrupt-controller@ad1000 {

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/