Re: [PATCH v9 1/4] drm/i2c: tda998x: Add DT support for audio

[Andrew Jackson]

On 01/07/15 17:08, Jean-Francois Moine wrote:
> On Wed, 07 Jan 2015 14:39:13 +0000
> Andrew Jackson <Andrew.Jackson@xxxxxxx> wrote:
> 
>>> +  - audio-ports: must contain one or two values selecting the source
>>> +	in the audio port.
>>> +	The source type is given by the corresponding entry in
>>> +	the audio-port-names property.  
>>
>> I think that this entry might benefit from a little more explanation.
>> The value specified here selects which pins on the chip provide the
>> audio input doesn't it?  In the outline datasheet that I have these are
>> listed in table 17:
>>
>> Audio port 	Input configuration
>> 		S/PDIF 		I2S-bus
>> AP0 		- 		WS (word select)
>> AP1 		S/PDIF input 	I2S-bus channel 0
>> AP2 		S/PDIF input 	I2S-bus channel 1
>> AP3[1] 				I2S-bus channel 2
>> AP4[1] 				I2S-bus channel 3
>> ACLK 		- 		SCK (I2S-bus clock)
>>
>> [1] Depending on package.
> 
> Your table is close to the one in the TDA9983B documentation I have,
> but the pins are not exactly the same:
> 
> AP0 		WS (word select)
> AP1 		I2S-bus port 0
> AP2 		I2S-bus port 1
> AP3 		I2S-bus port 2
> AP4 		I2S-bus port 3
> AP5		MCLK (master clock for S/PDIF)
> AP6		S/PDIF input
> AP7		AUX (internal test)
> ACLK 		SCK (I2S-bus clock)
> 
> That's why I did not know clearly why I had to set AP2 for S/PDIF input
> and (AP0 + AP1) for I2S input in the Cubox.
> 
> Then, the only more explanation I could give is "have a look at the
> audio input format and at the register 0x1e page 0 in the documentation
> of the TDA998x chip".
> 
> BTW, the tda998x driver supports only the TDA9989, TDA19988 and
> TDA19989 chips. If the TDA9983B would be supported, the audio port
> definitions would be of no use.
> 
> So, what would you see as an explanation?
> 

I understand your difficulty!  I was just wanting something to clarify the 
meaning of the value without reference to the driver source.

You could add something like this to your existing explanation: "The value
describes which audio input pins are selected; this varies depending
on chip type so consult the section on audio port configuration in the 
relevant datasheet.".  

	Andrew

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/