Re: [PATCH v1] input: make use of the input_set_capability helper

[Dmitry Torokhov]

On Wed, Jan 07, 2015 at 10:41:24AM +0100, Olliver Schinagl wrote:
> HEy Dmitry,
> 
> On 07-01-15 09:26, Dmitry Torokhov wrote:
> >On Wed, Jan 07, 2015 at 09:19:28AM +0100, Olliver Schinagl wrote:
> >>Hey Dmitry,
> >>
> >>On 07-01-15 08:57, Dmitry Torokhov wrote:
> >>>Hi Olliver,
> >>>
> >>>On Wed, Jan 07, 2015 at 08:31:06AM +0100, Olliver Schinagl wrote:
> >>>>From: Olliver Schinagl <oliver@xxxxxxxxxxx>
> >>>>
> >>>>Almost all of the speaker drivers under input manipulate the ev bits
> >>>>directly, which is not needed, as there is a helper available.
> >>>>
> >>>>This patch makes use of the helper for the speaker drivers.
> >>>>
> >>>>Signed-off-by: Olliver Schinagl <oliver@xxxxxxxxxxx>
> >>>>---
> >>>>  drivers/input/misc/cm109.c         | 4 ++--
> >>>>  drivers/input/misc/ixp4xx-beeper.c | 5 ++---
> >>>>  drivers/input/misc/m68kspkr.c      | 5 ++---
> >>>>  drivers/input/misc/pcspkr.c        | 5 ++---
> >>>>  drivers/input/misc/pwm-beeper.c    | 5 +----
> >>>>  drivers/input/misc/sparcspkr.c     | 6 ++----
> >>>>  6 files changed, 11 insertions(+), 19 deletions(-)
> >>>>
> >>>>diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
> >>>>index 9365535..8e41070 100644
> >>>>--- a/drivers/input/misc/cm109.c
> >>>>+++ b/drivers/input/misc/cm109.c
> >>>>@@ -767,10 +767,10 @@ static int cm109_usb_probe(struct usb_interface *intf,
> >>>>  	input_dev->keycodesize = sizeof(unsigned char);
> >>>>  	input_dev->keycodemax = ARRAY_SIZE(dev->keymap);
> >>>>-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_SND);
> >>>>-	input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
> >>>>+	input_set_capability(input_dev, EV_SND, SND_BELL | SND_TONE);
> >>>No, input_set_capability() takes single event code, not bitmask. The
> >>>fact that it works for these 2 values of SND events is pure coincidence
> >>>(the old code wasn't much better though).
> >Ah, not, it does not work at all. Instead of setting bits 1 and 2 your
> >code sets bit 3 in dev->sndbit.
> >
> >>What do you suggest we should do then? Fix input_set_capability to
> >>take bit masks? or multiline events?
> >>I'm not sure why __set_bits() wouldn't work for bitmasks, could you
> >>educate me?
> >Call it once per event:
> >
> >	input_set_capability(input_dev, EV_SND, SND_BELL);
> >	input_set_capability(input_dev, EV_SND, SND_TONE);
> roger, done
> >
> >>>>  	/* register available key events */
> >>>>+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
> >>>Would prefer __set_bit(EV_KEY, input_dev->evbit); here instead.
> >>I only moved the EV_KEY bit from above to its appropiate place here.
> >The original code was setting combination of bits; here we set single
> >one and __set_bit() is cleaner IMO.
> The documentation contradicts this actually, it says to use
> set_bit() first, but favors the direct writing as above as it is
> 'shorter in some cases'.

Right, sometimes, when you need to set 3-4 values on evbit (that is
pretty much guaranteed to fit into one long word) it is shoerted to
write

	input->evbit[0] = BIT(EV_A) | BIT(EV_B) | BIT(EV_C);

it is shorted, but it is not that great as it relies on knowledge of
EV_* values. Now relying on that knowledge is pretty safe as they form
userspace ABI and will not be changed, only extended. But nowadays I
prefer using __set_bit() or input_set_capability() if possible.

> 
> Furthermore, I'm a little confused as what the purpose of
> input_set_capability() is, if we use set_bits (or __set_bits) here.
> It appears we use set_bits here because it is manipulating several
> entries in the array (well atleast index 0) and
> set_input_capability() doesn't handle arrays? But when I look at
> struct input_dev, all those entries are arrays, including sndbit. So
> we only use set_input_capabilities when manipulating index 0 when
> its the only one? Feels a little strange to me, but probably is my
> lack of knowledge herin, so appologies for that.

__set_bit() sets arbitrary bit in memory started at given address. So to
set bit 65 (or bit 1 in the 3rd element of u32 array a) on you do:

	__set_bit(65, a);

input_set_capability() is a wrapper that does set both evbit and
appropriate *bit for given event type and event code and caller does not
need to know all the details about bitmap names inside input device
structure.

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/