[PATCH v3 2/5] clk: iproc: add initial common clock support
From: Ray Jui
Date: Wed Jan 07 2015 - 14:23:12 EST
This adds basic and generic support for various iProc PLLs and clocks
including the ARMPLL, GENPLL, LCPLL, MIPIPLL, and ASIU clocks.
SoCs under the iProc architecture can define their specific register
offsets and clock parameters for their PLL and clock controllers. These
parameters can be passed as arugments into the generic iProc PLL and
clock setup functions
Derived from code originally provided by Jonathan Richardson
<jonathar@xxxxxxxxxxxx>
Signed-off-by: Ray Jui <rjui@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <sbranden@xxxxxxxxxxxx>
---
drivers/clk/bcm/Kconfig | 9 +
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-iproc-armpll.c | 286 +++++++++++++++++++++
drivers/clk/bcm/clk-iproc-asiu.c | 275 ++++++++++++++++++++
drivers/clk/bcm/clk-iproc-clk.c | 238 ++++++++++++++++++
drivers/clk/bcm/clk-iproc-pll.c | 483 ++++++++++++++++++++++++++++++++++++
drivers/clk/bcm/clk-iproc.h | 155 ++++++++++++
7 files changed, 1447 insertions(+)
create mode 100644 drivers/clk/bcm/clk-iproc-armpll.c
create mode 100644 drivers/clk/bcm/clk-iproc-asiu.c
create mode 100644 drivers/clk/bcm/clk-iproc-clk.c
create mode 100644 drivers/clk/bcm/clk-iproc-pll.c
create mode 100644 drivers/clk/bcm/clk-iproc.h
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index 75506e5..66b5b7f 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -7,3 +7,12 @@ config CLK_BCM_KONA
Enable common clock framework support for Broadcom SoCs
using "Kona" style clock control units, including those
in the BCM281xx and BCM21664 families.
+
+config COMMON_CLK_IPROC
+ bool "Broadcom iProc clock support"
+ depends on ARCH_BCM_IPROC
+ depends on COMMON_CLK
+ default y
+ help
+ Enable common clock framework support for Broadcom SoCs
+ based on the "iProc" architecture
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
index 6297d05..6926636 100644
--- a/drivers/clk/bcm/Makefile
+++ b/drivers/clk/bcm/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
+obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-clk.o clk-iproc-asiu.o
diff --git a/drivers/clk/bcm/clk-iproc-armpll.c b/drivers/clk/bcm/clk-iproc-armpll.c
new file mode 100644
index 0000000..ec9b130
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-armpll.c
@@ -0,0 +1,286 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+
+#define IPROC_CLK_MAX_FREQ_POLICY 0x3
+#define IPROC_CLK_POLICY_FREQ_OFFSET 0x008
+#define IPROC_CLK_POLICY_FREQ_POLICY_FREQ_SHIFT 8
+#define IPROC_CLK_POLICY_FREQ_POLICY_FREQ_MASK 0x7
+
+#define IPROC_CLK_PLLARMA_OFFSET 0xc00
+#define IPROC_CLK_PLLARMA_LOCK_SHIFT 28
+#define IPROC_CLK_PLLARMA_PDIV_SHIFT 24
+#define IPROC_CLK_PLLARMA_PDIV_MASK 0xf
+#define IPROC_CLK_PLLARMA_NDIV_INT_SHIFT 8
+#define IPROC_CLK_PLLARMA_NDIV_INT_MASK 0x3ff
+
+#define IPROC_CLK_PLLARMB_OFFSET 0xc04
+#define IPROC_CLK_PLLARMB_NDIV_FRAC_MASK 0xfffff
+
+#define IPROC_CLK_PLLARMC_OFFSET 0xc08
+#define IPROC_CLK_PLLARMC_BYPCLK_EN_SHIFT 8
+#define IPROC_CLK_PLLARMC_MDIV_MASK 0xff
+
+#define IPROC_CLK_PLLARMCTL5_OFFSET 0xc20
+#define IPROC_CLK_PLLARMCTL5_H_MDIV_MASK 0xff
+
+#define IPROC_CLK_PLLARM_OFFSET_OFFSET 0xc24
+#define IPROC_CLK_PLLARM_SW_CTL_SHIFT 29
+#define IPROC_CLK_PLLARM_NDIV_INT_OFFSET_SHIFT 20
+#define IPROC_CLK_PLLARM_NDIV_INT_OFFSET_MASK 0xff
+#define IPROC_CLK_PLLARM_NDIV_FRAC_OFFSET_MASK 0xfffff
+
+#define IPROC_CLK_ARM_DIV_OFFSET 0xe00
+#define IPROC_CLK_ARM_DIV_PLL_SELECT_OVERRIDE_SHIFT 4
+#define IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK 0xf
+
+#define IPROC_CLK_POLICY_DBG_OFFSET 0xec0
+#define IPROC_CLK_POLICY_DBG_ACT_FREQ_SHIFT 12
+#define IPROC_CLK_POLICY_DBG_ACT_FREQ_MASK 0x7
+
+enum iproc_arm_pll_fid {
+ ARM_PLL_FID_CRYSTAL_CLK = 0,
+ ARM_PLL_FID_SYS_CLK = 2,
+ ARM_PLL_FID_CH0_SLOW_CLK = 6,
+ ARM_PLL_FID_CH1_FAST_CLK = 7
+};
+
+struct iproc_arm_pll {
+ struct clk_hw hw;
+ void __iomem *base;
+ struct clk_onecell_data clk_data;
+ unsigned long rate;
+};
+
+#define to_iproc_arm_pll(hw) container_of(hw, struct iproc_arm_pll, hw)
+
+static unsigned int __get_fid(struct iproc_arm_pll *pll)
+{
+ u32 val;
+ unsigned int policy, fid, active_fid;
+
+ val = readl(pll->base + IPROC_CLK_ARM_DIV_OFFSET);
+ if (val & (1 << IPROC_CLK_ARM_DIV_PLL_SELECT_OVERRIDE_SHIFT))
+ policy = val & IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK;
+ else
+ policy = 0;
+
+ /* something is seriously wrong */
+ BUG_ON(policy > IPROC_CLK_MAX_FREQ_POLICY);
+
+ val = readl(pll->base + IPROC_CLK_POLICY_FREQ_OFFSET);
+ fid = (val >> (IPROC_CLK_POLICY_FREQ_POLICY_FREQ_SHIFT * policy)) &
+ IPROC_CLK_POLICY_FREQ_POLICY_FREQ_MASK;
+
+ val = readl(pll->base + IPROC_CLK_POLICY_DBG_OFFSET);
+ active_fid = IPROC_CLK_POLICY_DBG_ACT_FREQ_MASK &
+ (val >> IPROC_CLK_POLICY_DBG_ACT_FREQ_SHIFT);
+ if (fid != active_fid) {
+ pr_debug("%s: fid override %u->%u\n", __func__, fid,
+ active_fid);
+ fid = active_fid;
+ }
+
+ pr_debug("%s: active fid: %u\n", __func__, fid);
+
+ return fid;
+}
+
+/*
+ * Determine the mdiv (post divider) based on the frequency ID being used.
+ * There are 4 sources that can be used to derive the output clock rate:
+ * - 25 MHz Crystal
+ * - System clock
+ * - PLL channel 0 (slow clock)
+ * - PLL channel 1 (fast clock)
+ */
+static int __get_mdiv(struct iproc_arm_pll *pll)
+{
+ unsigned int fid;
+ int mdiv;
+ u32 val;
+
+ fid = __get_fid(pll);
+
+ switch (fid) {
+ case ARM_PLL_FID_CRYSTAL_CLK:
+ case ARM_PLL_FID_SYS_CLK:
+ mdiv = 1;
+ break;
+
+ case ARM_PLL_FID_CH0_SLOW_CLK:
+ val = readl(pll->base + IPROC_CLK_PLLARMC_OFFSET);
+ mdiv = val & IPROC_CLK_PLLARMC_MDIV_MASK;
+ if (mdiv == 0)
+ mdiv = 256;
+ break;
+
+ case ARM_PLL_FID_CH1_FAST_CLK:
+ val = readl(pll->base + IPROC_CLK_PLLARMCTL5_OFFSET);
+ mdiv = val & IPROC_CLK_PLLARMCTL5_H_MDIV_MASK;
+ if (mdiv == 0)
+ mdiv = 256;
+ break;
+
+ default:
+ mdiv = -EFAULT;
+ }
+
+ return mdiv;
+}
+
+static unsigned int __get_ndiv(struct iproc_arm_pll *pll)
+{
+ u32 val;
+ unsigned int ndiv_int, ndiv_frac, ndiv;
+
+ val = readl(pll->base + IPROC_CLK_PLLARM_OFFSET_OFFSET);
+ if (val & (1 << IPROC_CLK_PLLARM_SW_CTL_SHIFT)) {
+ /*
+ * offset mode is active. Read the ndiv from the PLLARM OFFSET
+ * register
+ */
+ ndiv_int = (val >> IPROC_CLK_PLLARM_NDIV_INT_OFFSET_SHIFT) &
+ IPROC_CLK_PLLARM_NDIV_INT_OFFSET_MASK;
+ if (ndiv_int == 0)
+ ndiv_int = 256;
+
+ ndiv_frac = val & IPROC_CLK_PLLARM_NDIV_FRAC_OFFSET_MASK;
+ } else {
+ /* offset mode not active */
+ val = readl(pll->base + IPROC_CLK_PLLARMA_OFFSET);
+ ndiv_int = (val >> IPROC_CLK_PLLARMA_NDIV_INT_SHIFT) &
+ IPROC_CLK_PLLARMA_NDIV_INT_MASK;
+ if (ndiv_int == 0)
+ ndiv_int = 1024;
+
+ val = readl(pll->base + IPROC_CLK_PLLARMB_OFFSET);
+ ndiv_frac = val & IPROC_CLK_PLLARMB_NDIV_FRAC_MASK;
+ }
+
+ ndiv = (ndiv_int << 20) | ndiv_frac;
+
+ return ndiv;
+}
+
+/*
+ * The output frequency of the ARM PLL is calculated based on the ARM PLL
+ * divider values:
+ * pdiv = ARM PLL pre-divider
+ * ndiv = ARM PLL multiplier
+ * mdiv = ARM PLL post divider
+ *
+ * The frequency is calculated by:
+ * ((ndiv * parent clock rate) / pdiv) / mdiv
+ */
+static unsigned long iproc_arm_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct iproc_arm_pll *pll = to_iproc_arm_pll(hw);
+ u32 val;
+ int mdiv;
+ u64 ndiv;
+ unsigned int pdiv;
+
+ /* in bypass mode, use parent rate */
+ val = readl(pll->base + IPROC_CLK_PLLARMC_OFFSET);
+ if (val & (1 << IPROC_CLK_PLLARMC_BYPCLK_EN_SHIFT)) {
+ pll->rate = parent_rate;
+ return pll->rate;
+ }
+
+ /* PLL needs to be locked */
+ val = readl(pll->base + IPROC_CLK_PLLARMA_OFFSET);
+ if (!(val & (1 << IPROC_CLK_PLLARMA_LOCK_SHIFT))) {
+ pll->rate = 0;
+ return 0;
+ }
+
+ pdiv = (val >> IPROC_CLK_PLLARMA_PDIV_SHIFT) &
+ IPROC_CLK_PLLARMA_PDIV_MASK;
+ if (pdiv == 0)
+ pdiv = 16;
+
+ ndiv = __get_ndiv(pll);
+ mdiv = __get_mdiv(pll);
+ if (mdiv <= 0) {
+ pll->rate = 0;
+ return 0;
+ }
+ pll->rate = (ndiv * parent_rate) >> 20;
+ pll->rate = (pll->rate / pdiv) / mdiv;
+
+ pr_debug("%s: ARM PLL rate: %lu. parent rate: %lu\n", __func__,
+ pll->rate, parent_rate);
+ pr_debug("%s: ndiv_int: %u, pdiv: %u, mdiv: %d\n", __func__,
+ (unsigned int)(ndiv >> 20), pdiv, mdiv);
+
+ return pll->rate;
+}
+
+static const struct clk_ops iproc_arm_pll_ops = {
+ .recalc_rate = iproc_arm_pll_recalc_rate,
+};
+
+void __init iproc_armpll_setup(struct device_node *node)
+{
+ int ret;
+ struct clk *clk;
+ struct iproc_arm_pll *pll;
+ struct clk_init_data init;
+ const char *parent_name;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (WARN_ON(!pll))
+ return;
+
+ pll->base = of_iomap(node, 0);
+ if (WARN_ON(!pll->base))
+ goto err_free_pll;
+
+ init.name = node->name;
+ init.ops = &iproc_arm_pll_ops;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ goto err_iounmap;
+
+ pll->clk_data.clk_num = 1;
+ pll->clk_data.clks = &clk;
+
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get, &pll->clk_data);
+ if (WARN_ON(ret))
+ goto err_clk_unregister;
+
+ return;
+
+err_clk_unregister:
+ clk_unregister(clk);
+err_iounmap:
+ iounmap(pll->base);
+err_free_pll:
+ kfree(pll);
+}
diff --git a/drivers/clk/bcm/clk-iproc-asiu.c b/drivers/clk/bcm/clk-iproc-asiu.c
new file mode 100644
index 0000000..ab86b8c
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-asiu.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include "clk-iproc.h"
+
+struct iproc_asiu;
+
+struct iproc_asiu_clk {
+ struct clk_hw hw;
+ const char *name;
+ struct iproc_asiu *asiu;
+ unsigned long rate;
+ struct iproc_asiu_div div;
+ struct iproc_asiu_gate gate;
+};
+
+struct iproc_asiu {
+ void __iomem *div_base;
+ void __iomem *gate_base;
+
+ struct clk_onecell_data clk_data;
+ struct iproc_asiu_clk *clks;
+};
+
+#define to_asiu_clk(hw) container_of(hw, struct iproc_asiu_clk, hw)
+
+static int iproc_asiu_clk_enable(struct clk_hw *hw)
+{
+ struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+ struct iproc_asiu *asiu = clk->asiu;
+ u32 val;
+
+ /* some clocks at the ASIU level are always enabled */
+ if (clk->gate.offset == IPROC_CLK_INVALID_OFFSET)
+ return 0;
+
+ val = readl(asiu->gate_base + clk->gate.offset);
+ val |= (1 << clk->gate.en_shift);
+ writel(val, asiu->gate_base + clk->gate.offset);
+
+ return 0;
+}
+
+static void iproc_asiu_clk_disable(struct clk_hw *hw)
+{
+ struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+ struct iproc_asiu *asiu = clk->asiu;
+ u32 val;
+
+ /* some clocks at the ASIU level are always enabled */
+ if (clk->gate.offset == IPROC_CLK_INVALID_OFFSET)
+ return;
+
+ val = readl(asiu->gate_base + clk->gate.offset);
+ val &= ~(1 << clk->gate.en_shift);
+ writel(val, asiu->gate_base + clk->gate.offset);
+}
+
+static unsigned long iproc_asiu_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+ struct iproc_asiu *asiu = clk->asiu;
+ u32 val;
+ unsigned int div_h, div_l;
+
+ if (parent_rate == 0) {
+ clk->rate = 0;
+ return 0;
+ }
+
+ /* if clock divisor is not enabled, simply return parent rate */
+ val = readl(asiu->div_base + clk->div.offset);
+ if ((val & (1 << clk->div.en_shift)) == 0) {
+ clk->rate = parent_rate;
+ return parent_rate;
+ }
+
+ /* clock rate = parent rate / (high_div + 1) + (low_div + 1) */
+ div_h = (val >> clk->div.high_shift) & bit_mask(clk->div.high_width);
+ div_h++;
+ div_l = (val >> clk->div.low_shift) & bit_mask(clk->div.low_width);
+ div_l++;
+
+ clk->rate = parent_rate / (div_h + div_l);
+ pr_debug("%s: rate: %lu. parent rate: %lu div_h: %u div_l: %u\n",
+ __func__, clk->rate, parent_rate, div_h, div_l);
+
+ return clk->rate;
+}
+
+static long iproc_asiu_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned int div;
+
+ if (rate == 0 || *parent_rate == 0)
+ return -EINVAL;
+
+ if (rate == *parent_rate)
+ return *parent_rate;
+
+ div = DIV_ROUND_UP(*parent_rate, rate);
+ if (div < 2)
+ return *parent_rate;
+
+ return *parent_rate / div;
+}
+
+static int iproc_asiu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+ struct iproc_asiu *asiu = clk->asiu;
+ unsigned int div, div_h, div_l;
+ u32 val;
+
+ if (rate == 0 || parent_rate == 0)
+ return -EINVAL;
+
+ /* simply disable the divisor if one wants the same rate as parent */
+ if (rate == parent_rate) {
+ val = readl(asiu->div_base + clk->div.offset);
+ val &= ~(1 << clk->div.en_shift);
+ writel(val, asiu->div_base + clk->div.offset);
+ return 0;
+ }
+
+ div = DIV_ROUND_UP(parent_rate, rate);
+ if (div < 2)
+ return -EINVAL;
+
+ div_h = div_l = div >> 1;
+ div_h--;
+ div_l--;
+
+ val = readl(asiu->div_base + clk->div.offset);
+ val |= 1 << clk->div.en_shift;
+ if (div_h) {
+ val &= ~(bit_mask(clk->div.high_width)
+ << clk->div.high_shift);
+ val |= div_h << clk->div.high_shift;
+ } else {
+ val &= ~(bit_mask(clk->div.high_width)
+ << clk->div.high_shift);
+ }
+ if (div_l) {
+ val &= ~(bit_mask(clk->div.low_width) << clk->div.low_shift);
+ val |= div_l << clk->div.low_shift;
+ } else {
+ val &= ~(bit_mask(clk->div.low_width) << clk->div.low_shift);
+ }
+ writel(val, asiu->div_base + clk->div.offset);
+
+ return 0;
+}
+
+static const struct clk_ops iproc_asiu_ops = {
+ .enable = iproc_asiu_clk_enable,
+ .disable = iproc_asiu_clk_disable,
+ .recalc_rate = iproc_asiu_clk_recalc_rate,
+ .round_rate = iproc_asiu_clk_round_rate,
+ .set_rate = iproc_asiu_clk_set_rate,
+};
+
+void __init iproc_asiu_setup(struct device_node *node,
+ const struct iproc_asiu_div *div,
+ const struct iproc_asiu_gate *gate, unsigned int num_clks)
+{
+ int i, ret;
+ struct iproc_asiu *asiu;
+
+ if (WARN_ON(!gate || !div))
+ return;
+
+ asiu = kzalloc(sizeof(*asiu), GFP_KERNEL);
+ if (WARN_ON(!asiu))
+ return;
+
+ asiu->clk_data.clk_num = num_clks;
+ asiu->clk_data.clks = kcalloc(num_clks, sizeof(*asiu->clk_data.clks),
+ GFP_KERNEL);
+ if (WARN_ON(!asiu->clk_data.clks))
+ goto err_clks;
+
+ asiu->clks = kcalloc(num_clks, sizeof(*asiu->clks), GFP_KERNEL);
+ if (WARN_ON(!asiu->clks))
+ goto err_asiu_clks;
+
+ asiu->div_base = of_iomap(node, 0);
+ if (WARN_ON(!asiu->div_base))
+ goto err_iomap_div;
+
+ asiu->gate_base = of_iomap(node, 1);
+ if (WARN_ON(!asiu->gate_base))
+ goto err_iomap_gate;
+
+ for (i = 0; i < num_clks; i++) {
+ struct clk_init_data init;
+ struct clk *clk;
+ const char *parent_name;
+ struct iproc_asiu_clk *asiu_clk;
+ const char *clk_name;
+
+ clk_name = kzalloc(IPROC_CLK_NAME_LEN, GFP_KERNEL);
+ if (WARN_ON(!clk_name))
+ goto err_clk_register;
+
+ ret = of_property_read_string_index(node, "clock-output-names",
+ i, &clk_name);
+ if (WARN_ON(ret))
+ goto err_clk_register;
+
+ asiu_clk = &asiu->clks[i];
+ asiu_clk->name = clk_name;
+ asiu_clk->asiu = asiu;
+ asiu_clk->div = div[i];
+ asiu_clk->gate = gate[i];
+ init.name = clk_name;
+ init.ops = &iproc_asiu_ops;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ asiu_clk->hw.init = &init;
+
+ clk = clk_register(NULL, &asiu_clk->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ goto err_clk_register;
+ asiu->clk_data.clks[i] = clk;
+ }
+
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get,
+ &asiu->clk_data);
+ if (WARN_ON(ret))
+ goto err_clk_register;
+
+ return;
+
+err_clk_register:
+ for (i = 0; i < num_clks; i++)
+ kfree(asiu->clks[i].name);
+ iounmap(asiu->gate_base);
+
+err_iomap_gate:
+ iounmap(asiu->div_base);
+
+err_iomap_div:
+ kfree(asiu->clks);
+
+err_asiu_clks:
+ kfree(asiu->clk_data.clks);
+
+err_clks:
+ kfree(asiu);
+}
diff --git a/drivers/clk/bcm/clk-iproc-clk.c b/drivers/clk/bcm/clk-iproc-clk.c
new file mode 100644
index 0000000..be3c42c
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-clk.c
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include "clk-iproc.h"
+
+struct iproc_pll;
+
+struct iproc_clk {
+ struct clk_hw hw;
+ const char *name;
+ struct iproc_pll *pll;
+ unsigned long rate;
+ const struct iproc_clk_ctrl *ctrl;
+};
+
+struct iproc_pll {
+ void __iomem *base;
+ struct clk_onecell_data clk_data;
+ struct iproc_clk *clks;
+};
+
+#define to_iproc_clk(hw) container_of(hw, struct iproc_clk, hw)
+
+static int iproc_clk_enable(struct clk_hw *hw)
+{
+ struct iproc_clk *clk = to_iproc_clk(hw);
+ const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+ struct iproc_pll *pll = clk->pll;
+ u32 val;
+
+ /* channel enable is active low */
+ val = readl(pll->base + ctrl->enable.offset);
+ val &= ~(1 << ctrl->enable.enable_shift);
+ writel(val, pll->base + ctrl->enable.offset);
+
+ /* also make sure channel is not held */
+ val = readl(pll->base + ctrl->enable.offset);
+ val &= ~(1 << ctrl->enable.hold_shift);
+ writel(val, pll->base + ctrl->enable.offset);
+
+ return 0;
+}
+
+static void iproc_clk_disable(struct clk_hw *hw)
+{
+ struct iproc_clk *clk = to_iproc_clk(hw);
+ const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+ struct iproc_pll *pll = clk->pll;
+ u32 val;
+
+ if (ctrl->flags & IPROC_CLK_AON)
+ return;
+
+ val = readl(pll->base + ctrl->enable.offset);
+ val |= 1 << ctrl->enable.enable_shift;
+ writel(val, pll->base + ctrl->enable.offset);
+}
+
+static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct iproc_clk *clk = to_iproc_clk(hw);
+ const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+ struct iproc_pll *pll = clk->pll;
+ u32 val;
+ unsigned int mdiv;
+
+ if (parent_rate == 0)
+ return 0;
+
+ val = readl(pll->base + ctrl->mdiv.offset);
+ mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
+ if (mdiv == 0)
+ mdiv = 256;
+
+ clk->rate = parent_rate / mdiv;
+
+ return clk->rate;
+}
+
+static long iproc_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ unsigned int div;
+
+ if (rate == 0 || *parent_rate == 0)
+ return -EINVAL;
+
+ if (rate == *parent_rate)
+ return *parent_rate;
+
+ div = DIV_ROUND_UP(*parent_rate, rate);
+ if (div < 2)
+ return *parent_rate;
+
+ if (div > 256)
+ div = 256;
+
+ return *parent_rate / div;
+}
+
+static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct iproc_clk *clk = to_iproc_clk(hw);
+ const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+ struct iproc_pll *pll = clk->pll;
+ u32 val;
+ unsigned int div;
+
+ if (rate == 0 || parent_rate == 0)
+ return -EINVAL;
+
+ div = DIV_ROUND_UP(parent_rate, rate);
+ if (div > 256)
+ return -EINVAL;
+
+ val = readl(pll->base + ctrl->mdiv.offset);
+ if (div == 256) {
+ val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+ } else {
+ val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+ val |= div << ctrl->mdiv.shift;
+ }
+ writel(val, pll->base + ctrl->mdiv.offset);
+ clk->rate = parent_rate / div;
+
+ return 0;
+}
+
+static const struct clk_ops iproc_clk_ops = {
+ .enable = iproc_clk_enable,
+ .disable = iproc_clk_disable,
+ .recalc_rate = iproc_clk_recalc_rate,
+ .round_rate = iproc_clk_round_rate,
+ .set_rate = iproc_clk_set_rate,
+};
+
+void __init iproc_clk_setup(struct device_node *node,
+ const struct iproc_clk_ctrl *ctrl, unsigned int num_clks)
+{
+ int i, ret;
+ struct iproc_pll *pll;
+
+ if (WARN_ON(!ctrl))
+ return;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (WARN_ON(!pll))
+ return;
+
+ pll->clk_data.clk_num = num_clks;
+ pll->clk_data.clks = kcalloc(num_clks, sizeof(*pll->clk_data.clks),
+ GFP_KERNEL);
+ if (WARN_ON(!pll->clk_data.clks))
+ goto err_clks;
+
+ pll->clks = kcalloc(num_clks, sizeof(*pll->clks), GFP_KERNEL);
+ if (WARN_ON(!pll->clks))
+ goto err_pll_clks;
+
+ pll->base = of_iomap(node, 0);
+ if (WARN_ON(!pll->base))
+ goto err_iomap;
+
+ for (i = 0; i < num_clks; i++) {
+ struct clk_init_data init;
+ struct clk *clk;
+ const char *parent_name;
+ struct iproc_clk *iclk;
+ const char *clk_name;
+
+ clk_name = kzalloc(IPROC_CLK_NAME_LEN, GFP_KERNEL);
+ if (WARN_ON(!clk_name))
+ goto err_clk_register;
+
+ ret = of_property_read_string_index(node, "clock-output-names",
+ i, &clk_name);
+ if (WARN_ON(ret))
+ goto err_clk_register;
+
+ iclk = &pll->clks[i];
+ iclk->name = clk_name;
+ iclk->pll = pll;
+ iclk->ctrl = &ctrl[i];
+ init.name = clk_name;
+ init.ops = &iproc_clk_ops;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ iclk->hw.init = &init;
+
+ clk = clk_register(NULL, &iclk->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ goto err_clk_register;
+ pll->clk_data.clks[i] = clk;
+ }
+
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get, &pll->clk_data);
+ if (WARN_ON(ret))
+ goto err_clk_register;
+
+ return;
+
+err_clk_register:
+ for (i = 0; i < num_clks; i++)
+ kfree(pll->clks[i].name);
+ iounmap(pll->base);
+
+err_iomap:
+ kfree(pll->clks);
+
+err_pll_clks:
+ kfree(pll->clk_data.clks);
+
+err_clks:
+ kfree(pll);
+}
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
new file mode 100644
index 0000000..cd3bd38
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -0,0 +1,483 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include "clk-iproc.h"
+
+#define PLL_VCO_HIGH_SHIFT 19
+#define PLL_VCO_LOW_SHIFT 30
+
+/* number of delay loops waiting for PLL to lock */
+#define LOCK_DELAY 100
+
+/* number of VCO frequency bands */
+#define NUM_FREQ_BANDS 8
+
+#define NUM_KP_BANDS 3
+enum kp_band {
+ KP_BAND_MID = 0,
+ KP_BAND_HIGH,
+ KP_BAND_HIGH_HIGH
+};
+
+static const unsigned int kp_table[NUM_KP_BANDS][NUM_FREQ_BANDS] = {
+ { 5, 6, 6, 7, 7, 8, 9, 10 },
+ { 4, 4, 5, 5, 6, 7, 8, 9 },
+ { 4, 5, 5, 6, 7, 8, 9, 10 },
+};
+
+static const unsigned long ref_freq_table[NUM_FREQ_BANDS][2] = {
+ { 10000000, 12500000 },
+ { 12500000, 15000000 },
+ { 15000000, 20000000 },
+ { 20000000, 25000000 },
+ { 25000000, 50000000 },
+ { 50000000, 75000000 },
+ { 75000000, 100000000 },
+ { 100000000, 125000000 },
+};
+
+enum vco_freq_range {
+ VCO_LOW = 700000000U,
+ VCO_MID = 1200000000U,
+ VCO_HIGH = 2200000000U,
+ VCO_HIGH_HIGH = 3100000000U,
+ VCO_MAX = 4000000000U,
+};
+
+struct iproc_pll {
+ struct clk_hw hw;
+ void __iomem *pll_base;
+ void __iomem *pwr_base;
+ void __iomem *asiu_base;
+ struct clk_onecell_data clk_data;
+ const char *name;
+ const struct iproc_pll_ctrl *ctrl;
+ const struct iproc_pll_vco_freq_param *vco_param;
+ unsigned int num_vco_entries;
+ unsigned long rate;
+};
+
+#define to_iproc_pll(hw) container_of(hw, struct iproc_pll, hw)
+
+/*
+ * Get the clock rate based on name
+ */
+static unsigned long __get_rate(const char *clk_name)
+{
+ struct clk *clk;
+
+ clk = __clk_lookup(clk_name);
+ if (!clk) {
+ pr_err("%s: unable to find clock by name: %s\n", __func__,
+ clk_name);
+ return 0;
+ }
+
+ return clk_get_rate(clk);
+}
+
+/*
+ * Based on the target frequency, find a match from the VCO frequency parameter
+ * table and return its index
+ */
+static int pll_get_rate_index(struct iproc_pll *pll, unsigned int target_rate)
+{
+ int i;
+
+ for (i = 0; i < pll->num_vco_entries; i++)
+ if (target_rate == pll->vco_param[i].rate)
+ break;
+
+ if (i >= pll->num_vco_entries)
+ return -EINVAL;
+
+ return i;
+}
+
+static int get_kp(unsigned long ref_freq, enum kp_band kp_index)
+{
+ int i;
+
+ if (ref_freq < ref_freq_table[0][0])
+ return -EINVAL;
+
+ for (i = 0; i < NUM_FREQ_BANDS; i++) {
+ if (ref_freq >= ref_freq_table[i][0] &&
+ ref_freq < ref_freq_table[i][1])
+ return kp_table[kp_index][i];
+ }
+ return -EINVAL;
+}
+
+static int pll_wait_for_lock(struct iproc_pll *pll)
+{
+ int i;
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+ for (i = 0; i < LOCK_DELAY; i++) {
+ u32 val = readl(pll->pll_base + ctrl->status.offset);
+
+ if (val & (1 << ctrl->status.shift))
+ return 0;
+ udelay(10);
+ }
+
+ return -EIO;
+}
+
+static void __pll_disable(struct iproc_pll *pll)
+{
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ u32 val;
+
+ if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+ val = readl(pll->asiu_base + ctrl->asiu.offset);
+ val &= ~(1 << ctrl->asiu.en_shift);
+ writel(val, pll->asiu_base + ctrl->asiu.offset);
+ }
+
+ /* latch input value so core power can be shut down */
+ val = readl(pll->pwr_base + ctrl->aon.offset);
+ val |= (1 << ctrl->aon.iso_shift);
+ writel(val, pll->pwr_base + ctrl->aon.offset);
+
+ /* power down the core */
+ val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+ writel(val, pll->pwr_base + ctrl->aon.offset);
+}
+
+static int __pll_enable(struct iproc_pll *pll)
+{
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ u32 val;
+
+ /* power up the PLL and make sure it's not latched */
+ val = readl(pll->pwr_base + ctrl->aon.offset);
+ val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+ val &= ~(1 << ctrl->aon.iso_shift);
+ writel(val, pll->pwr_base + ctrl->aon.offset);
+
+ /* certain PLLs also need to be ungated from the ASIU top level */
+ if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+ val = readl(pll->asiu_base + ctrl->asiu.offset);
+ val |= (1 << ctrl->asiu.en_shift);
+ writel(val, pll->asiu_base + ctrl->asiu.offset);
+ }
+
+ return 0;
+}
+
+static void __pll_put_in_reset(struct iproc_pll *pll)
+{
+ u32 val;
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+
+ val = readl(pll->pll_base + reset->offset);
+ val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
+ writel(val, pll->pll_base + reset->offset);
+}
+
+static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
+ unsigned int ka, unsigned int ki)
+{
+ u32 val;
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+
+ val = readl(pll->pll_base + reset->offset);
+ val &= ~(bit_mask(reset->ki_width) << reset->ki_shift |
+ bit_mask(reset->kp_width) << reset->kp_shift |
+ bit_mask(reset->ka_width) << reset->ka_shift);
+ val |= ki << reset->ki_shift | kp << reset->kp_shift |
+ ka << reset->ka_shift;
+ val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
+ writel(val, pll->pll_base + reset->offset);
+}
+
+static int pll_set_rate(struct iproc_pll *pll, unsigned int rate_index,
+ unsigned long parent_rate)
+{
+ const struct iproc_pll_vco_freq_param *vco =
+ &pll->vco_param[rate_index];
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ int ka = 0, ki, kp, ret;
+ unsigned long rate = vco->rate;
+ u32 val;
+ enum kp_band kp_index;
+ unsigned long ref_freq;
+
+ /*
+ * reference frequency = parent frequency / PDIV
+ * If PDIV = 0, then it becomes a multiplier (x2)
+ */
+ if (vco->pdiv == 0)
+ ref_freq = parent_rate * 2;
+ else
+ ref_freq = parent_rate / vco->pdiv;
+
+ /* determine Ki and Kp index based on target VCO frequency */
+ if (rate >= VCO_LOW && rate < VCO_HIGH) {
+ ki = 4;
+ kp_index = KP_BAND_MID;
+ } else if (rate >= VCO_HIGH && rate && rate < VCO_HIGH_HIGH) {
+ ki = 3;
+ kp_index = KP_BAND_HIGH;
+ } else if (rate >= VCO_HIGH_HIGH && rate < VCO_MAX) {
+ ki = 3;
+ kp_index = KP_BAND_HIGH_HIGH;
+ } else {
+ pr_err("%s: pll: %s has invalid rate: %lu\n", __func__,
+ pll->name, rate);
+ return -EINVAL;
+ }
+
+ kp = get_kp(ref_freq, kp_index);
+ if (kp < 0) {
+ pr_err("%s: pll: %s has invalid kp\n", __func__, pll->name);
+ return kp;
+ }
+
+ ret = __pll_enable(pll);
+ if (ret) {
+ pr_err("%s: pll: %s fails to enable\n", __func__, pll->name);
+ return ret;
+ }
+
+ /* put PLL in reset */
+ __pll_put_in_reset(pll);
+
+ writel(0, pll->pll_base + ctrl->vco_ctrl.u_offset);
+ val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
+
+ if (rate >= VCO_LOW && rate < VCO_MID)
+ val |= (1 << PLL_VCO_LOW_SHIFT);
+
+ if (rate < VCO_HIGH)
+ val &= ~(1 << PLL_VCO_HIGH_SHIFT);
+ else
+ val |= (1 << PLL_VCO_HIGH_SHIFT);
+
+ writel(val, pll->pll_base + ctrl->vco_ctrl.l_offset);
+
+ /* program integer part of NDIV */
+ val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+ val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
+ val |= vco->ndiv_int << ctrl->ndiv_int.shift;
+ writel(val, pll->pll_base + ctrl->ndiv_int.offset);
+
+ /* program fractional part of NDIV */
+ if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+ val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+ val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
+ ctrl->ndiv_frac.shift);
+ val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
+ writel(val, pll->pll_base + ctrl->ndiv_frac.offset);
+ }
+
+ /* program PDIV */
+ val = readl(pll->pll_base + ctrl->pdiv.offset);
+ val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
+ val |= vco->pdiv << ctrl->pdiv.shift;
+ writel(val, pll->pll_base + ctrl->pdiv.offset);
+
+ __pll_bring_out_reset(pll, kp, ka, ki);
+
+ ret = pll_wait_for_lock(pll);
+ if (ret < 0) {
+ pr_err("%s: pll: %s failed to lock\n", __func__, pll->name);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int iproc_pll_enable(struct clk_hw *hw)
+{
+ struct iproc_pll *pll = to_iproc_pll(hw);
+
+ return __pll_enable(pll);
+}
+
+static void iproc_pll_disable(struct clk_hw *hw)
+{
+ struct iproc_pll *pll = to_iproc_pll(hw);
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+ if (ctrl->flags & IPROC_CLK_AON)
+ return;
+
+ __pll_disable(pll);
+}
+
+static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct iproc_pll *pll = to_iproc_pll(hw);
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ u32 val;
+ u64 ndiv;
+ unsigned int ndiv_int, ndiv_frac, pdiv;
+
+ if (parent_rate == 0)
+ return 0;
+
+ /* PLL needs to be locked */
+ val = readl(pll->pll_base + ctrl->status.offset);
+ if ((val & (1 << ctrl->status.shift)) == 0) {
+ pll->rate = 0;
+ return 0;
+ }
+
+ /*
+ * PLL output frequency =
+ *
+ * ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
+ */
+ val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+ ndiv_int = (val >> ctrl->ndiv_int.shift) &
+ bit_mask(ctrl->ndiv_int.width);
+ ndiv = ndiv_int << ctrl->ndiv_int.shift;
+
+ if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+ val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+ ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
+ bit_mask(ctrl->ndiv_frac.width);
+
+ if (ndiv_frac != 0)
+ ndiv = (ndiv_int << ctrl->ndiv_int.shift) | ndiv_frac;
+ }
+
+ val = readl(pll->pll_base + ctrl->pdiv.offset);
+ pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
+
+ pll->rate = (ndiv * parent_rate) >> ctrl->ndiv_int.shift;
+
+ if (pdiv == 0)
+ pll->rate *= 2;
+ else
+ pll->rate /= pdiv;
+
+ return pll->rate;
+}
+
+static const struct clk_ops iproc_pll_ops = {
+ .enable = iproc_pll_enable,
+ .disable = iproc_pll_disable,
+ .recalc_rate = iproc_pll_recalc_rate,
+};
+
+void __init iproc_pll_setup(struct device_node *node,
+ const struct iproc_pll_ctrl *ctrl,
+ const struct iproc_pll_vco_freq_param *vco_param,
+ unsigned int num_vco_entries)
+{
+ int ret;
+ struct clk *clk;
+ struct iproc_pll *pll;
+ struct clk_init_data init;
+ const char *parent_name;
+ unsigned int rate;
+
+ if (WARN_ON(!ctrl))
+ return;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (WARN_ON(!pll))
+ return;
+
+ pll->pll_base = of_iomap(node, 0);
+ if (WARN_ON(!pll->pll_base))
+ goto err_pll_iomap;
+
+ pll->pwr_base = of_iomap(node, 1);
+ if (WARN_ON(!pll->pwr_base))
+ goto err_pwr_iomap;
+
+ /* some PLLs require gating control at the top ASIU level */
+ if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+ pll->asiu_base = of_iomap(node, 2);
+ if (WARN_ON(!pll->asiu_base))
+ goto err_asiu_iomap;
+ }
+
+ pll->ctrl = ctrl;
+ pll->name = node->name;
+ init.name = node->name;
+ init.ops = &iproc_pll_ops;
+ init.flags = 0;
+ parent_name = of_clk_get_parent_name(node, 0);
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+ pll->hw.init = &init;
+
+ /* configure the PLL to the desired VCO frequency if specified */
+ ret = of_property_read_u32(node, "clock-frequency", &rate);
+ if (!ret) {
+ unsigned long parent_rate;
+ int rate_index;
+
+ if (WARN_ON(!vco_param))
+ goto err_clk_register;
+
+ pll->num_vco_entries = num_vco_entries;
+ pll->vco_param = vco_param;
+
+ parent_rate = __get_rate(parent_name);
+ if (WARN_ON(!parent_rate))
+ goto err_clk_register;
+
+ rate_index = pll_get_rate_index(pll, rate);
+ if (WARN_ON(rate_index < 0))
+ goto err_clk_register;
+
+ ret = pll_set_rate(pll, rate_index, parent_rate);
+ if (WARN_ON(ret))
+ goto err_clk_register;
+ }
+
+ clk = clk_register(NULL, &pll->hw);
+ if (WARN_ON(IS_ERR(clk)))
+ goto err_clk_register;
+
+ pll->clk_data.clk_num = 1;
+ pll->clk_data.clks = &clk;
+
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get,
+ &pll->clk_data);
+ if (WARN_ON(ret))
+ goto err_clk_add;
+
+ return;
+
+err_clk_add:
+ clk_unregister(clk);
+err_clk_register:
+ if (pll->asiu_base)
+ iounmap(pll->asiu_base);
+err_asiu_iomap:
+ iounmap(pll->pwr_base);
+err_pwr_iomap:
+ iounmap(pll->pll_base);
+err_pll_iomap:
+ kfree(pll);
+}
diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h
new file mode 100644
index 0000000..4aa0479
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLK_IPROC_H
+#define _CLK_IPROC_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+
+#define IPROC_CLK_NAME_LEN 25
+#define IPROC_CLK_INVALID_OFFSET 0xffffffff
+#define bit_mask(width) ((1 << (width)) - 1)
+
+/* clock should not be disabled at runtime */
+#define IPROC_CLK_AON BIT(0)
+
+/* PLL requires gating through ASIU */
+#define IPROC_CLK_PLL_ASIU BIT(1)
+
+/* PLL has fractional part of the NDIV */
+#define IPROC_CLK_PLL_HAS_NDIV_FRAC BIT(2)
+
+/*
+ * Parameters for VCO frequency configuration
+ *
+ * VCO frequency =
+ * ((ndiv_int + ndiv_frac / 2^20) * (ref freqeuncy / pdiv)
+ */
+struct iproc_pll_vco_freq_param {
+ unsigned long rate;
+ unsigned int ndiv_int;
+ unsigned int ndiv_frac;
+ unsigned int pdiv;
+};
+
+struct iproc_clk_reg_op {
+ unsigned int offset;
+ unsigned int shift;
+ unsigned int width;
+};
+
+/*
+ * Clock gating control at the top ASIU level
+ */
+struct iproc_asiu_gate {
+ unsigned int offset;
+ unsigned int en_shift;
+};
+
+/*
+ * Control of powering on/off of a PLL
+ *
+ * Before powering off a PLL, input isolation (ISO) needs to be enabled
+ */
+struct iproc_pll_aon_pwr_ctrl {
+ unsigned int offset;
+ unsigned int pwr_width;
+ unsigned int pwr_shift;
+ unsigned int iso_shift;
+};
+
+/*
+ * Control of the PLL reset, with Ki, Kp, and Ka parameters
+ */
+struct iproc_pll_reset_ctrl {
+ unsigned int offset;
+ unsigned int reset_shift;
+ unsigned int p_reset_shift;
+ unsigned int ki_shift;
+ unsigned int ki_width;
+ unsigned int kp_shift;
+ unsigned int kp_width;
+ unsigned int ka_shift;
+ unsigned int ka_width;
+};
+
+struct iproc_pll_vco_ctrl {
+ unsigned int u_offset;
+ unsigned int l_offset;
+};
+
+/*
+ * Main PLL control parameters
+ */
+struct iproc_pll_ctrl {
+ unsigned long flags;
+ struct iproc_pll_aon_pwr_ctrl aon;
+ struct iproc_asiu_gate asiu;
+ struct iproc_pll_reset_ctrl reset;
+ struct iproc_clk_reg_op ndiv_int;
+ struct iproc_clk_reg_op ndiv_frac;
+ struct iproc_clk_reg_op pdiv;
+ struct iproc_pll_vco_ctrl vco_ctrl;
+ struct iproc_clk_reg_op status;
+};
+
+/*
+ * Controls enabling/disabling a PLL derived clock
+ */
+struct iproc_clk_enable_ctrl {
+ unsigned int offset;
+ unsigned int enable_shift;
+ unsigned int hold_shift;
+ unsigned int bypass_shift;
+};
+
+/*
+ * Main clock control parameters for clocks derived from the PLLs
+ */
+struct iproc_clk_ctrl {
+ unsigned int channel;
+ unsigned long flags;
+ struct iproc_clk_enable_ctrl enable;
+ struct iproc_clk_reg_op mdiv;
+};
+
+/*
+ * Divisor of the ASIU clocks
+ */
+struct iproc_asiu_div {
+ unsigned int offset;
+ unsigned int en_shift;
+ unsigned int high_shift;
+ unsigned int high_width;
+ unsigned int low_shift;
+ unsigned int low_width;
+};
+
+extern void __init iproc_armpll_setup(struct device_node *node);
+extern void __init iproc_pll_setup(struct device_node *node,
+ const struct iproc_pll_ctrl *ctrl,
+ const struct iproc_pll_vco_freq_param *vco_param,
+ unsigned int num_freqs);
+extern void __init iproc_clk_setup(struct device_node *node,
+ const struct iproc_clk_ctrl *ctrl, unsigned int num_clks);
+extern void __init iproc_asiu_setup(struct device_node *node,
+ const struct iproc_asiu_div *div,
+ const struct iproc_asiu_gate *gate, unsigned int num_clks);
+
+#endif /* _CLK_IPROC_H */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/