[PATCH][RFC] ide: pdc202xxx_new: Remove do_gettimeofday() usage for ktime_get

[John Stultz]

As part of the y2038 cleanups, this patch removes the do_gettimeofday
usage replacing it with ktime_get.

Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Cc: linux-ide@xxxxxxxxxxxxxxx
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
---
 drivers/ide/pdc202xx_new.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c
index df73cbd..94bd05f 100644
--- a/drivers/ide/pdc202xx_new.c
+++ b/drivers/ide/pdc202xx_new.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/ktime.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/init.h>
@@ -243,13 +244,13 @@ static long read_counter(u32 dma_base)
  */
 static long detect_pll_input_clock(unsigned long dma_base)
 {
-	struct timeval start_time, end_time;
+	ktime_t start_time, end_time;
 	long start_count, end_count;
 	long pll_input, usec_elapsed;
 	u8 scr1;
 
 	start_count = read_counter(dma_base);
-	do_gettimeofday(&start_time);
+	start_time = ktime_get();
 
 	/* Start the test mode */
 	outb(0x01, dma_base + 0x01);
@@ -261,7 +262,7 @@ static long detect_pll_input_clock(unsigned long dma_base)
 	mdelay(10);
 
 	end_count = read_counter(dma_base);
-	do_gettimeofday(&end_time);
+	end_time = ktime_get();
 
 	/* Stop the test mode */
 	outb(0x01, dma_base + 0x01);
@@ -273,8 +274,7 @@ static long detect_pll_input_clock(unsigned long dma_base)
 	 * Calculate the input clock in Hz
 	 * (the clock counter is 30 bit wide and counts down)
 	 */
-	usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
-		(end_time.tv_usec - start_time.tv_usec);
+	usec_elapsed = (long)ktime_to_ns(ktime_sub(end_time, start_time))/1000;
 	pll_input = ((start_count - end_count) & 0x3fffffff) / 10 *
 		(10000000 / usec_elapsed);
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/