Re: [PATCH 2/2] Chipidea: Set connect-at-fullspeed bit when entering host mode if CI_HDRC_FORCE_FULLSPEED is set in the platform data

[Peter Chen]

On Sun, Jan 04, 2015 at 01:14:59PM +1100, Daniel Tang wrote:
> PORTSC_PFSC is not set on entering host mode which means the USB OTG
> controller will attempt to enumerate USB devices at high speed even when the
> CI_HDRC_FORCE_FULLSPEED flag is set in the platform data.
> 
> This patch ensures it is set right before host mode operations begin if needed.
> 
> Signed-off-by: Daniel Tang <dt.tangr@xxxxxxxxx>
> ---
>  drivers/usb/chipidea/host.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> index c1694cf..f106d25 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -132,6 +132,9 @@ static int host_start(struct ci_hdrc *ci)
>  	if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
>  		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
>  
> +	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED)
> +		hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
> +
>  	return ret;
>  
>  put_hcd:
> -- 
> 2.1.3
> 

looks ok, will push

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/