[PATCH v2 03/22] [SCSI] mpt2sas, mpt3sas: Fail the host reset initiated due to discovery related I/O timeouts at driver load time

[Sreekanth Reddy]

When a flaky disk is there in a topology then during driver load,
discovery related I/O times out; which results in SCSI error recovery
initiating host reset and then the controller won't see any disk.

In this patch, The driver would return FAILED status to the host reset
initiated due to discovery related I/O timeout if ioc->is_driver_loading
is set. This flag would be set until we exit out of scsih_scan_finished().
i.e.
During device discovery if one of the disk is flaky
(which responds to some discovery commands and doesn't respond to some)
the driver wouldn't perform host reset for discovery related I/O timeout.
Instead it would return Failure for the host reset resulting in the
flaky disk getting removed by the SCSI Mid layer,
so other disks would be added correctly.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxxx>
Reviewed-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
---
 drivers/scsi/mpt2sas/mpt2sas_scsih.c | 9 +++++++++
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 ++++++++
 2 files changed, 17 insertions(+)

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index bbdea00..9803d8f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2729,9 +2729,18 @@ _scsih_host_reset(struct scsi_cmnd *scmd)
 	    ioc->name, scmd);
 	scsi_print_command(scmd);
 
+	if (ioc->is_driver_loading) {
+		printk(MPT2SAS_INFO_FMT "Blocking the host reset\n",
+							  ioc->name);
+		r = FAILED;
+		goto out;
+	}
+
 	retval = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 	    FORCE_BIG_HAMMER);
 	r = (retval < 0) ? FAILED : SUCCESS;
+
+ out:
 	printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n",
 	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index d36c304..8cbd078 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -2392,9 +2392,17 @@ _scsih_host_reset(struct scsi_cmnd *scmd)
 	    ioc->name, scmd);
 	scsi_print_command(scmd);
 
+	if (ioc->is_driver_loading) {
+		pr_info(MPT3SAS_FMT "Blocking the host reset\n",
+		    ioc->name);
+		r = FAILED;
+		goto out;
+	}
+
 	retval = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP,
 	    FORCE_BIG_HAMMER);
 	r = (retval < 0) ? FAILED : SUCCESS;
+out:
 	pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
 	    ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
 
-- 
2.0.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/