[PATCH char-misc-next v2 00/13] misc: mic: SCIF driver

From: Sudeep Dutt
Date: Mon Jan 12 2015 - 18:11:00 EST

Next message: Sudeep Dutt: "[PATCH char-misc-next v2 01/13] misc: mic: SCIF header file and IOCTL interface"
Previous message: Andrew Morton: "Re: [PATCH v12 18/20] dax: Add dax_zero_page_range"
Next in thread: Sudeep Dutt: "[PATCH char-misc-next v2 01/13] misc: mic: SCIF header file and IOCTL interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

ChangeLog:
=========
v1 => v2:
a) Use kernel-doc formatting for SCIF header file documentation, enhance
SCIF ring buffer documentation and formatting cleanup in patch 4 as
per feedback from Greg Kroah-Hartman
b) SCIF bug fixes and cleanups since initial post

v1: Initial post @ https://lkml.org/lkml/2014/12/10/546

Description:
============

The Symmetric Communication Interface (SCIF (pronounced as skiff)) is a low
level communications API across PCIe currently implemented for MIC. Currently
SCIF provides inter-node communication within a single host platform, where a
node is a MIC Coprocessor or Xeon based host. SCIF abstracts the details of
communicating over the PCIe bus while providing an API that is symmetric
across all the nodes in the PCIe network. An important design objective for SCIF
is to deliver the maximum possible performance given the communication
abilities of the hardware. SCIF has been used to implement an offload compiler
runtime and OFED support for MPI implementations for MIC coprocessors.

==== SCIF API Components ====
The SCIF API has the following parts:
1. Connection establishment using a client server model
2. Byte stream messaging intended for short messages
3. Node enumeration to determine online nodes
4. Poll semantics for detection of incoming connections and messages
5. Memory registration to pin down pages
6. Remote memory mapping for low latency CPU accesses via mmap
7. Remote DMA (RDMA) for high bandwidth DMA transfers
8. Fence APIs for RDMA synchronization

SCIF exposes the notion of a connection which can be used by peer processes on
nodes in a SCIF PCIe "network" to share memory "windows" and to communicate. A
process in a SCIF node initiates a SCIF connection to a peer process on a
different node via a SCIF "endpoint". SCIF endpoints support messaging APIs
which are similar to connection oriented socket APIs. Connected SCIF endpoints
can also register local memory which is followed by data transfer using either
DMA, CPU copies or remote memory mapping via mmap. SCIF supports both user and
kernel mode clients which are functionally equivalent.

==== SCIF Performance for MIC ====
DMA bandwidth comparison between the TCP (over ethernet over PCIe) stack versus
SCIF shows the performance advantages of SCIF for HPC applications and runtimes.

Comparison of TCP and SCIF based BW

Throughput (GB/sec)
8 + PCIe Bandwidth ******
+ TCP ######
7 + ************************************** SCIF %%%%%%
| %%%%%%%%%%%%%%%%%%%
6 + %%%%
| %%
| %%%
5 + %%
| %%
4 + %%
| %%
3 + %%
| %
2 + %%
| %%
| %
1 +
+ ######################################
0 +++---+++--+--+-+--+--+-++-+--+-++-+--+-++-+-
1 10 100 1000 10000 100000
Transfer Size (KBytes)

SCIF allows memory sharing via mmap(..) between processes on different PCIe
nodes and thus provides bare-metal PCIe latency. The round trip SCIF mmap
latency from the host to an x100 MIC for an 8 byte message is 0.44 usecs.

For more information on SCIF please refer to the Linux Con 2013 slides titled
"IntelÂ MIC x100 Coprocessor Driver - on the Frontiers of Linux & HPC" at
http://events.linuxfoundation.org/sites/events/files/slides/LinuxConMicDriver.pdf
The talk can also be viewed at https://www.youtube.com/watch?v=dylbmmQs4W0

This initial patch series introduces the SCIF API and implements the SCIF
connection, messaging and node enumeration APIs. SCIF poll, mmap, RDMA and
fence APIs will be submitted in a future patch series once the initial base
patches are accepted upstream.

This patch series is divided into 13 patches as follows:
1) SCIF header file documenting the API along with the IOCTL interface

2) SCIF ring buffer is a single producer, single consumer byte stream ring
buffer optimized for avoiding reads across the PCIe bus. The ring buffer is
used to implement a receive queue for SCIF driver messaging between nodes and
for byte stream messaging between SCIF endpoints. Each SCIF node has a
receive queue for every other SCIF node, and each connected endpoint has a
receive queue for messages from its peer. This pair of receive queues is
referred to as a SCIF queue pair.

3) SCIF hardware bus which abstracts the low level hardware details so that the
same SCIF driver can work without any changes on the host or the card as long
as the hardware bus operations are implemented.

4) SCIF peer bus is used to register and unregister SCIF peer devices internally
by the SCIF driver to signify the addition and removal of peer nodes
respectively from the SCIF network. This simplifies remote node handling
within SCIF and will also be used to support device probe/remove for SCIF
client drivers (e.g. netdev over SCIF)

5) Common MIC header file changes to enable SCIF

6) SCIF module initialization, DMA/remote memory mapping APIs and debugfs hooks.

7) SCIF node queue pair setup sets up the kernel mode private node
queue pairs between all the nodes to enable internal control
message communication.

8) SCIF character device file operations and kernel APIs for opening and
closing a user and kernel mode SCIF endpoint. This patch also enables
binding to a SCIF port and listening for incoming SCIF connections.

9) SCIF connection APIs which establish a SCIF connection between
a pair of user or kernel mode endpoints.

10) SCIF messaging APIs which allow sending messages between the SCIF endpoints
via a byte stream based ring buffer which has been optimized to avoid reads
across PCIe. The node enumeration API enables a user to query for the number
of online nodes.

11) MIC host driver specific changes to enable SCIF

12) MIC card driver specific changes to enable SCIF

13) Add support for loading/unloading SCIF driver

Nikhil Rao (1):
misc: mic: SCIF connections APIs i.e. accept and connect

Sudeep Dutt (12):
misc: mic: SCIF header file and IOCTL interface
misc: mic: SCIF ring buffer infrastructure
misc: mic: SCIF Hardware Bus
misc: mic: SCIF Peer Bus
misc: mic: Common MIC header file changes in preparation for SCIF
misc: mic: SCIF module initialization
misc: mic: SCIF node queue pair setup management
misc: mic: SCIF open close bind and listen APIs
misc: mic: SCIF messaging and node enumeration APIs
misc: mic: MIC host driver specific changes to enable SCIF
misc: mic: MIC card driver specific changes to enable SCIF
misc: mic: add support for loading/unloading SCIF driver

Documentation/mic/mic_overview.txt | 28 +-
Documentation/mic/scif_overview.txt | 62 ++
drivers/misc/mic/Kconfig | 40 +-
drivers/misc/mic/Makefile | 3 +-
drivers/misc/mic/bus/Makefile | 1 +
drivers/misc/mic/scif/Makefile | 15 +
include/uapi/linux/Kbuild | 1 +
drivers/misc/mic/bus/scif_bus.h | 129 ++++
drivers/misc/mic/card/mic_device.h | 11 +-
drivers/misc/mic/card/mic_x100.h | 1 +
drivers/misc/mic/common/mic_dev.h | 3 +
drivers/misc/mic/host/mic_device.h | 11 +-
drivers/misc/mic/host/mic_intr.h | 3 +-
drivers/misc/mic/host/mic_smpt.h | 1 +
drivers/misc/mic/scif/scif_epd.h | 160 ++++
drivers/misc/mic/scif/scif_main.h | 252 +++++++
drivers/misc/mic/scif/scif_map.h | 113 +++
drivers/misc/mic/scif/scif_nodeqp.h | 182 +++++
drivers/misc/mic/scif/scif_peer_bus.h | 65 ++
drivers/misc/mic/scif/scif_rb.h | 100 +++
include/linux/scif.h | 1125 ++++++++++++++++++++++++++++
include/uapi/linux/mic_common.h | 12 +
include/uapi/linux/scif_ioctl.h | 213 ++++++
drivers/misc/mic/bus/scif_bus.c | 210 ++++++
drivers/misc/mic/card/mic_device.c | 132 +++-
drivers/misc/mic/card/mic_x100.c | 61 +-
drivers/misc/mic/host/mic_boot.c | 264 ++++++-
drivers/misc/mic/host/mic_debugfs.c | 13 +
drivers/misc/mic/host/mic_main.c | 6 +
drivers/misc/mic/host/mic_smpt.c | 7 +-
drivers/misc/mic/host/mic_virtio.c | 6 +-
drivers/misc/mic/host/mic_x100.c | 3 +-
drivers/misc/mic/scif/scif_api.c | 1271 ++++++++++++++++++++++++++++++++
drivers/misc/mic/scif/scif_debugfs.c | 85 +++
drivers/misc/mic/scif/scif_epd.c | 353 +++++++++
drivers/misc/mic/scif/scif_fd.c | 303 ++++++++
drivers/misc/mic/scif/scif_main.c | 391 ++++++++++
drivers/misc/mic/scif/scif_nm.c | 237 ++++++
drivers/misc/mic/scif/scif_nodeqp.c | 1307 +++++++++++++++++++++++++++++++++
drivers/misc/mic/scif/scif_peer_bus.c | 124 ++++
drivers/misc/mic/scif/scif_ports.c | 124 ++++
drivers/misc/mic/scif/scif_rb.c | 248 +++++++
Documentation/mic/mpssd/mpss | 24 +-
43 files changed, 7644 insertions(+), 56 deletions(-)
create mode 100644 Documentation/mic/scif_overview.txt
create mode 100644 drivers/misc/mic/scif/Makefile
create mode 100644 drivers/misc/mic/bus/scif_bus.h
create mode 100644 drivers/misc/mic/scif/scif_epd.h
create mode 100644 drivers/misc/mic/scif/scif_main.h
create mode 100644 drivers/misc/mic/scif/scif_map.h
create mode 100644 drivers/misc/mic/scif/scif_nodeqp.h
create mode 100644 drivers/misc/mic/scif/scif_peer_bus.h
create mode 100644 drivers/misc/mic/scif/scif_rb.h
create mode 100644 include/linux/scif.h
create mode 100644 include/uapi/linux/scif_ioctl.h
create mode 100644 drivers/misc/mic/bus/scif_bus.c
create mode 100644 drivers/misc/mic/scif/scif_api.c
create mode 100644 drivers/misc/mic/scif/scif_debugfs.c
create mode 100644 drivers/misc/mic/scif/scif_epd.c
create mode 100644 drivers/misc/mic/scif/scif_fd.c
create mode 100644 drivers/misc/mic/scif/scif_main.c
create mode 100644 drivers/misc/mic/scif/scif_nm.c
create mode 100644 drivers/misc/mic/scif/scif_nodeqp.c
create mode 100644 drivers/misc/mic/scif/scif_peer_bus.c
create mode 100644 drivers/misc/mic/scif/scif_ports.c
create mode 100644 drivers/misc/mic/scif/scif_rb.c

--
1.8.2.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Sudeep Dutt: "[PATCH char-misc-next v2 01/13] misc: mic: SCIF header file and IOCTL interface"
Previous message: Andrew Morton: "Re: [PATCH v12 18/20] dax: Add dax_zero_page_range"
Next in thread: Sudeep Dutt: "[PATCH char-misc-next v2 01/13] misc: mic: SCIF header file and IOCTL interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]