Re: [PATCH v9 1/4] drm/i2c: tda998x: Add DT support for audio

[Jean-Francois Moine]

On Tue, 13 Jan 2015 12:27:15 +0000
Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> wrote:

> On Tue, Jan 13, 2015 at 01:21:58PM +0100, Philipp Zabel wrote:
> > I wonder if it wouldn't be nicer to have the AP# and type in the device
> > tree and then calculate the register value from that in the driver.
> > 
> > 	port@1 {
> > 		reg = <1>; /* AP1 */
> > 		nxp,audio-port = "i2s";
> > 		tda998x_i2s: endpoint {
> > 			remote-endpoint = <&audio1_i2s>;
> > 		};
> > 	};
> 
> What about the case where we have 4 I2S streams being supplied to the
> device on four separate AP inputs?

4 streams on 4 different APs (sources) should work, but 4 streams from
a same source should be detailed.

In an other way, the unit address (== first reg) does not need to be a
sequence number. It is the I/O base in most DTs.
So, it could be the port value: 

	port@230145 {
		port-type = "rgb";
		reg = <0x230145>;
		hdmi_0: endpoint {
			remote-endpoint = <&lcd0_0>;
		};
	};
	port@3 {			/* AP1 = I2S */
		port-type = "i2s";
		reg = <0x03>;
		tda998x_i2s: endpoint {
			remote-endpoint = <&audio1_i2s>;
		};
	};
	port@4 {			 /* AP2 = S/PDIF */
		port-type = "spdif";
		reg = <0x04>;
		tda998x_spdif: endpoint {
			remote-endpoint = <&audio1_spdif1>;
		};
	};

-- 
Ken ar c'hentaÃ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/