[PATCH] staging/iio/accel: checkpatch: fixed long lines by putting comments in seperate lines

From: Helene Gsaenger
Date: Wed Jan 14 2015 - 07:18:38 EST

Signed-off-by: Helene Gsaenger <helene.gsaenger@xxxxxxxxxxxxxx>
Signed-off-by: Simone Weiss <simone.weiss@xxxxxx>
---
drivers/staging/iio/accel/adis16203.h | 99 +++++++++++++++++++++++------------
1 file changed, 66 insertions(+), 33 deletions(-)

diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index acc688d..8d1e200 100644
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -3,43 +3,76 @@

#define ADIS16203_STARTUP_DELAY 220 /* ms */

-#define ADIS16203_FLASH_CNT 0x00 /* Flash memory write count */
-#define ADIS16203_SUPPLY_OUT 0x02 /* Output, power supply */
-#define ADIS16203_AUX_ADC 0x08 /* Output, auxiliary ADC input */
-#define ADIS16203_TEMP_OUT 0x0A /* Output, temperature */
-#define ADIS16203_XINCL_OUT 0x0C /* Output, x-axis inclination */
-#define ADIS16203_YINCL_OUT 0x0E /* Output, y-axis inclination */
-#define ADIS16203_INCL_NULL 0x18 /* Incline null calibration */
-#define ADIS16203_ALM_MAG1 0x20 /* Alarm 1 amplitude threshold */
-#define ADIS16203_ALM_MAG2 0x22 /* Alarm 2 amplitude threshold */
-#define ADIS16203_ALM_SMPL1 0x24 /* Alarm 1, sample period */
-#define ADIS16203_ALM_SMPL2 0x26 /* Alarm 2, sample period */
-#define ADIS16203_ALM_CTRL 0x28 /* Alarm control */
-#define ADIS16203_AUX_DAC 0x30 /* Auxiliary DAC data */
-#define ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital input/output control */
-#define ADIS16203_MSC_CTRL 0x34 /* Miscellaneous control */
-#define ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) control */
-#define ADIS16203_AVG_CNT 0x38 /* Operation, filter configuration */
-#define ADIS16203_SLP_CNT 0x3A /* Operation, sleep mode control */
-#define ADIS16203_DIAG_STAT 0x3C /* Diagnostics, system status register */
-#define ADIS16203_GLOB_CMD 0x3E /* Operation, system command register */
+/* Flash memory write count */
+#define ADIS16203_FLASH_CNT 0x00
+/* Output, power supply */
+#define ADIS16203_SUPPLY_OUT 0x02
+/* Output, auxiliary ADC input */
+#define ADIS16203_AUX_ADC 0x08
+/* Output, temperature */
+#define ADIS16203_TEMP_OUT 0x0A
+/* Output, x-axis inclination */
+#define ADIS16203_XINCL_OUT 0x0C
+/* Output, y-axis inclination */
+#define ADIS16203_YINCL_OUT 0x0E
+/* Incline null calibration */
+#define ADIS16203_INCL_NULL 0x18
+/* Alarm 1 amplitude threshold */
+#define ADIS16203_ALM_MAG1 0x20
+/* Alarm 2 amplitude threshold */
+#define ADIS16203_ALM_MAG2 0x22
+/* Alarm 1, sample period */
+#define ADIS16203_ALM_SMPL1 0x24
+/* Alarm 2, sample period */
+#define ADIS16203_ALM_SMPL2 0x26
+/* Alarm control */
+#define ADIS16203_ALM_CTRL 0x28
+/* Auxiliary DAC data */
+#define ADIS16203_AUX_DAC 0x30
+/* General-purpose digital input/output control */
+#define ADIS16203_GPIO_CTRL 0x32
+/* Miscellaneous control */
+#define ADIS16203_MSC_CTRL 0x34
+/* Internal sample period (rate) control */
+#define ADIS16203_SMPL_PRD 0x36
+/* Operation, filter configuration */
+#define ADIS16203_AVG_CNT 0x38
+/* Operation, sleep mode control */
+#define ADIS16203_SLP_CNT 0x3A
+/* Diagnostics, system status register */
+#define ADIS16203_DIAG_STAT 0x3C
+/* Operation, system command register */
+#define ADIS16203_GLOB_CMD 0x3E

/* MSC_CTRL */
-#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
-#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9) /* Reverses rotation of both inclination outputs */
-#define ADIS16203_MSC_CTRL_SELF_TEST_EN (1 << 8) /* Self-test enable */
-#define ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2) /* Data-ready enable: 1 = enabled, 0 = disabled */
-#define ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1) /* Data-ready polarity: 1 = active high, 0 = active low */
-#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
+/* Self-test at power-on: 1 = disabled, 0 = enabled */
+#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST (1 << 10)
+/* Reverses rotation of both inclination outputs */
+#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN (1 << 9)
+/* Self-test enable */
+#define ADIS16203_MSC_CTRL_SELF_TEST_EN (1 << 8)
+/* Data-ready enable: 1 = enabled, 0 = disabled */
+#define ADIS16203_MSC_CTRL_DATA_RDY_EN (1 << 2)
+/* Data-ready polarity: 1 = active high, 0 = active low */
+#define ADIS16203_MSC_CTRL_ACTIVE_HIGH (1 << 1)
+/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
+#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 (1 << 0)

/* DIAG_STAT */
-#define ADIS16203_DIAG_STAT_ALARM2 (1<<9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_ALARM1 (1<<8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
-#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */
-#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */
-#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */
-#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */
-#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 3.15 V */
+/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16203_DIAG_STAT_ALARM2 (1<<9)
+/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
+#define ADIS16203_DIAG_STAT_ALARM1 (1<<8)
+/* Self-test diagnostic error flag */
+#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
+/* SPI communications failure */
+#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3
+/* Flash update failure */
+#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2
+/* Power supply above 3.625 V */
+#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1
+/* Power supply below 3.15 V */
+#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0

/* GLOB_CMD */
#define ADIS16203_GLOB_CMD_SW_RESET (1<<7)
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/