[PATCH 03/11] x86: mass removal of ARGOFFSET
From: Denys Vlasenko
Date: Wed Jan 14 2015 - 16:49:26 EST
ARGOFFSET is zero now, removing it changes no code.
A few macros lost "offset" parameter, since it is always zero now too.
Signed-off-by: Denys Vlasenko <dvlasenk@xxxxxxxxxx>
CC: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
CC: Oleg Nesterov <oleg@xxxxxxxxxx>
CC: Borislav Petkov <bp@xxxxxxxxx>
CC: "H. Peter Anvin" <hpa@xxxxxxxxx>
CC: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
CC: Frederic Weisbecker <fweisbec@xxxxxxxxx>
CC: X86 ML <x86@xxxxxxxxxx>
CC: Alexei Starovoitov <ast@xxxxxxxxxxxx>
CC: Will Drewry <wad@xxxxxxxxxxxx>
CC: Kees Cook <keescook@xxxxxxxxxxxx>
CC: linux-kernel@xxxxxxxxxxxxxxx
---
arch/x86/ia32/ia32entry.S | 142 ++++++++++++++++++++---------------------
arch/x86/include/asm/calling.h | 2 -
arch/x86/kernel/entry_64.S | 64 +++++++++----------
3 files changed, 103 insertions(+), 105 deletions(-)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index f4bed49..e99f8a5 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -41,13 +41,13 @@
movl %edx,%edx /* zero extension */
.endm
- /* clobbers %eax */
- .macro CLEAR_RREGS offset=0, _r9=rax
+ /* clobbers %rax */
+ .macro CLEAR_RREGS _r9=rax
xorl %eax,%eax
- movq %rax,\offset+R11(%rsp)
- movq %rax,\offset+R10(%rsp)
- movq %\_r9,\offset+R9(%rsp)
- movq %rax,\offset+R8(%rsp)
+ movq %rax,R11(%rsp)
+ movq %rax,R10(%rsp)
+ movq %\_r9,R9(%rsp)
+ movq %rax,R8(%rsp)
.endm
/*
@@ -60,14 +60,14 @@
* If it's -1 to make us punt the syscall, then (u32)-1 is still
* an appropriately invalid value.
*/
- .macro LOAD_ARGS32 offset, _r9=0
+ .macro LOAD_ARGS32 _r9=0
.if \_r9
- movl \offset+R9(%rsp),%r9d
+ movl R9(%rsp),%r9d
.endif
- movl \offset+RCX(%rsp),%ecx
- movl \offset+RDX(%rsp),%edx
- movl \offset+RSI(%rsp),%esi
- movl \offset+RDI(%rsp),%edi
+ movl RCX(%rsp),%ecx
+ movl RDX(%rsp),%edx
+ movl RSI(%rsp),%esi
+ movl RDI(%rsp),%edi
movl %eax,%eax /* zero extension */
.endm
@@ -158,12 +158,12 @@ ENTRY(ia32_sysenter_target)
* ourselves. To save a few cycles, we can check whether
* NT was set instead of doing an unconditional popfq.
*/
- testl $X86_EFLAGS_NT,EFLAGS-ARGOFFSET(%rsp)
+ testl $X86_EFLAGS_NT,EFLAGS(%rsp)
jnz sysenter_fix_flags
sysenter_flags_fixed:
- orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP)
CFI_REMEMBER_STATE
jnz sysenter_tracesys
cmpq $(IA32_NR_syscalls-1),%rax
@@ -172,16 +172,16 @@ sysenter_do_call:
IA32_ARG_FIXUP
sysenter_dispatch:
call *ia32_sys_call_table(,%rax,8)
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP)
jnz sysexit_audit
sysexit_from_sys_call:
- andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
/* clear IF, that popfq doesn't enable interrupts early */
- andl $~0x200,EFLAGS-ARGOFFSET(%rsp)
- movl RIP-ARGOFFSET(%rsp),%edx /* User %eip */
+ andl $~0x200,EFLAGS(%rsp)
+ movl RIP(%rsp),%edx /* User %eip */
CFI_REGISTER rip,rdx
RESTORE_RSI_RDI
REMOVE_PT_GPREGS_FROM_STACK 3*8
@@ -207,18 +207,18 @@ sysexit_from_sys_call:
movl %ebx,%esi /* 2nd arg: 1st syscall arg */
movl %eax,%edi /* 1st arg: syscall number */
call __audit_syscall_entry
- movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall number */
+ movl RAX(%rsp),%eax /* reload syscall number */
cmpq $(IA32_NR_syscalls-1),%rax
ja ia32_badsys
movl %ebx,%edi /* reload 1st syscall arg */
- movl RCX-ARGOFFSET(%rsp),%esi /* reload 2nd syscall arg */
- movl RDX-ARGOFFSET(%rsp),%edx /* reload 3rd syscall arg */
- movl RSI-ARGOFFSET(%rsp),%ecx /* reload 4th syscall arg */
- movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */
+ movl RCX(%rsp),%esi /* reload 2nd syscall arg */
+ movl RDX(%rsp),%edx /* reload 3rd syscall arg */
+ movl RSI(%rsp),%ecx /* reload 4th syscall arg */
+ movl RDI(%rsp),%r8d /* reload 5th syscall arg */
.endm
.macro auditsys_exit exit
- testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP)
jnz ia32_ret_from_sys_call
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
@@ -229,13 +229,13 @@ sysexit_from_sys_call:
1: setbe %al /* 1 if error, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
call __audit_syscall_exit
- movq RAX-ARGOFFSET(%rsp),%rax /* reload syscall return value */
+ movq RAX(%rsp),%rax /* reload syscall return value */
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl %edi,TI_flags+THREAD_INFO(%rsp,RIP)
jz \exit
- CLEAR_RREGS -ARGOFFSET
+ CLEAR_RREGS
jmp int_with_check
.endm
@@ -255,7 +255,7 @@ sysenter_fix_flags:
sysenter_tracesys:
#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP)
jz sysenter_auditsys
#endif
SAVE_EXTRA_REGS
@@ -263,7 +263,7 @@ sysenter_tracesys:
movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
- LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
+ LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
RESTORE_EXTRA_REGS
cmpq $(IA32_NR_syscalls-1),%rax
ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
@@ -309,17 +309,17 @@ ENTRY(ia32_cstar_target)
ALLOC_PT_GPREGS_ON_STACK 8
SAVE_C_REGS_EXCEPT_RCX_R891011
movl %eax,%eax /* zero extension */
- movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
- movq %rcx,RIP-ARGOFFSET(%rsp)
- CFI_REL_OFFSET rip,RIP-ARGOFFSET
- movq %rbp,RCX-ARGOFFSET(%rsp) /* this lies slightly to ptrace */
+ movq %rax,ORIG_RAX(%rsp)
+ movq %rcx,RIP(%rsp)
+ CFI_REL_OFFSET rip,RIP
+ movq %rbp,RCX(%rsp) /* this lies slightly to ptrace */
movl %ebp,%ecx
- movq $__USER32_CS,CS-ARGOFFSET(%rsp)
- movq $__USER32_DS,SS-ARGOFFSET(%rsp)
- movq %r11,EFLAGS-ARGOFFSET(%rsp)
- /*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
- movq %r8,RSP-ARGOFFSET(%rsp)
- CFI_REL_OFFSET rsp,RSP-ARGOFFSET
+ movq $__USER32_CS,CS(%rsp)
+ movq $__USER32_DS,SS(%rsp)
+ movq %r11,EFLAGS(%rsp)
+ /*CFI_REL_OFFSET rflags,EFLAGS*/
+ movq %r8,RSP(%rsp)
+ CFI_REL_OFFSET rsp,RSP
/* no need to do an access_ok check here because r8 has been
32bit zero extended */
/* hardware stack frame is complete now */
@@ -327,8 +327,8 @@ ENTRY(ia32_cstar_target)
1: movl (%r8),%r9d
_ASM_EXTABLE(1b,ia32_badarg)
ASM_CLAC
- orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP)
CFI_REMEMBER_STATE
jnz cstar_tracesys
cmpq $IA32_NR_syscalls-1,%rax
@@ -337,32 +337,32 @@ cstar_do_call:
IA32_ARG_FIXUP 1
cstar_dispatch:
call *ia32_sys_call_table(,%rax,8)
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP)
jnz sysretl_audit
sysretl_from_sys_call:
- andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
RESTORE_RSI_RDI_RDX
- movl RIP-ARGOFFSET(%rsp),%ecx
+ movl RIP(%rsp),%ecx
CFI_REGISTER rip,rcx
- movl EFLAGS-ARGOFFSET(%rsp),%r11d
+ movl EFLAGS(%rsp),%r11d
/*CFI_REGISTER rflags,r11*/
xorq %r10,%r10
xorq %r9,%r9
xorq %r8,%r8
TRACE_IRQS_ON
- movl RSP-ARGOFFSET(%rsp),%esp
+ movl RSP(%rsp),%esp
CFI_RESTORE rsp
USERGS_SYSRET32
#ifdef CONFIG_AUDITSYSCALL
cstar_auditsys:
CFI_RESTORE_STATE
- movl %r9d,R9-ARGOFFSET(%rsp) /* register to be clobbered by call */
+ movl %r9d,R9(%rsp) /* register to be clobbered by call */
auditsys_entry_common
- movl R9-ARGOFFSET(%rsp),%r9d /* reload 6th syscall arg */
+ movl R9(%rsp),%r9d /* reload 6th syscall arg */
jmp cstar_dispatch
sysretl_audit:
@@ -371,16 +371,16 @@ sysretl_audit:
cstar_tracesys:
#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP)
jz cstar_auditsys
#endif
xchgl %r9d,%ebp
SAVE_EXTRA_REGS
- CLEAR_RREGS 0, r9
+ CLEAR_RREGS r9
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
- LOAD_ARGS32 ARGOFFSET, 1 /* reload args from stack in case ptrace changed it */
+ LOAD_ARGS32 1 /* reload args from stack in case ptrace changed it */
RESTORE_EXTRA_REGS
xchgl %ebp,%r9d
cmpq $(IA32_NR_syscalls-1),%rax
@@ -438,8 +438,8 @@ ENTRY(ia32_syscall)
this could be a problem. */
ALLOC_PT_GPREGS_ON_STACK
SAVE_C_REGS_EXCEPT_R891011
- orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP)
jnz ia32_tracesys
cmpq $(IA32_NR_syscalls-1),%rax
ja ia32_badsys
@@ -447,9 +447,9 @@ ia32_do_call:
IA32_ARG_FIXUP
call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
ia32_sysret:
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
ia32_ret_from_sys_call:
- CLEAR_RREGS -ARGOFFSET
+ CLEAR_RREGS
jmp int_ret_from_sys_call
ia32_tracesys:
@@ -458,7 +458,7 @@ ia32_tracesys:
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
- LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
+ LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
RESTORE_EXTRA_REGS
cmpq $(IA32_NR_syscalls-1),%rax
ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */
@@ -466,7 +466,7 @@ ia32_tracesys:
END(ia32_syscall)
ia32_badsys:
- movq $0,ORIG_RAX-ARGOFFSET(%rsp)
+ movq $0,ORIG_RAX(%rsp)
movq $-ENOSYS,%rax
jmp ia32_sysret
@@ -499,17 +499,17 @@ ia32_ptregs_common:
CFI_ENDPROC
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,SS+8-ARGOFFSET
- CFI_REL_OFFSET rax,RAX-ARGOFFSET
- CFI_REL_OFFSET rcx,RCX-ARGOFFSET
- CFI_REL_OFFSET rdx,RDX-ARGOFFSET
- CFI_REL_OFFSET rsi,RSI-ARGOFFSET
- CFI_REL_OFFSET rdi,RDI-ARGOFFSET
- CFI_REL_OFFSET rip,RIP-ARGOFFSET
-/* CFI_REL_OFFSET cs,CS-ARGOFFSET*/
-/* CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
- CFI_REL_OFFSET rsp,RSP-ARGOFFSET
-/* CFI_REL_OFFSET ss,SS-ARGOFFSET*/
+ CFI_DEF_CFA rsp,SS+8
+ CFI_REL_OFFSET rax,RAX
+ CFI_REL_OFFSET rcx,RCX
+ CFI_REL_OFFSET rdx,RDX
+ CFI_REL_OFFSET rsi,RSI
+ CFI_REL_OFFSET rdi,RDI
+ CFI_REL_OFFSET rip,RIP
+/* CFI_REL_OFFSET cs,CS*/
+/* CFI_REL_OFFSET rflags,EFLAGS*/
+ CFI_REL_OFFSET rsp,RSP
+/* CFI_REL_OFFSET ss,SS*/
SAVE_EXTRA_REGS 8
call *%rax
RESTORE_EXTRA_REGS 8
diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h
index a2ef97a..3cd7e31 100644
--- a/arch/x86/include/asm/calling.h
+++ b/arch/x86/include/asm/calling.h
@@ -88,8 +88,6 @@ For 32-bit we have the following conventions - kernel is built with
#define RSP 19*8
#define SS 20*8
-#define ARGOFFSET 0
-
.macro ALLOC_PT_GPREGS_ON_STACK addskip=0
subq $15*8+\addskip, %rsp
CFI_ADJUST_CFA_OFFSET 15*8+\addskip
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index f5e815e..a15bef6 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -73,7 +73,7 @@ ENDPROC(native_usergs_sysret64)
#endif /* CONFIG_PARAVIRT */
-.macro TRACE_IRQS_IRETQ offset=ARGOFFSET
+.macro TRACE_IRQS_IRETQ offset=0
#ifdef CONFIG_TRACE_IRQFLAGS
bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
jnc 1f
@@ -107,7 +107,7 @@ ENDPROC(native_usergs_sysret64)
call debug_stack_reset
.endm
-.macro TRACE_IRQS_IRETQ_DEBUG offset=ARGOFFSET
+.macro TRACE_IRQS_IRETQ_DEBUG offset=0
bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
jnc 1f
TRACE_IRQS_ON_DEBUG
@@ -183,16 +183,16 @@ ENDPROC(native_usergs_sysret64)
* frame that enables passing a complete pt_regs to a C function.
*/
.macro DEFAULT_FRAME start=1 offset=0
- XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET
- CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET
- CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET
- CFI_REL_OFFSET rdx, RDX+\offset-ARGOFFSET
- CFI_REL_OFFSET rcx, RCX+\offset-ARGOFFSET
- CFI_REL_OFFSET rax, RAX+\offset-ARGOFFSET
- CFI_REL_OFFSET r8, R8+\offset-ARGOFFSET
- CFI_REL_OFFSET r9, R9+\offset-ARGOFFSET
- CFI_REL_OFFSET r10, R10+\offset-ARGOFFSET
- CFI_REL_OFFSET r11, R11+\offset-ARGOFFSET
+ XCPT_FRAME \start, ORIG_RAX+\offset
+ CFI_REL_OFFSET rdi, RDI+\offset
+ CFI_REL_OFFSET rsi, RSI+\offset
+ CFI_REL_OFFSET rdx, RDX+\offset
+ CFI_REL_OFFSET rcx, RCX+\offset
+ CFI_REL_OFFSET rax, RAX+\offset
+ CFI_REL_OFFSET r8, R8+\offset
+ CFI_REL_OFFSET r9, R9+\offset
+ CFI_REL_OFFSET r10, R10+\offset
+ CFI_REL_OFFSET r11, R11+\offset
CFI_REL_OFFSET rbx, RBX+\offset
CFI_REL_OFFSET rbp, RBP+\offset
CFI_REL_OFFSET r12, R12+\offset
@@ -236,13 +236,13 @@ ENTRY(ret_from_fork)
RESTORE_EXTRA_REGS
- testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread?
+ testl $3, CS(%rsp) # from kernel_thread?
jz 1f
testl $_TIF_IA32, TI_flags(%rcx) # 32-bit compat task needs IRET
jnz int_ret_from_sys_call
- RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
+ RESTORE_TOP_OF_STACK %rdi
jmp ret_from_sys_call # go to the SYSRET fastpath
1:
@@ -309,11 +309,11 @@ GLOBAL(system_call_after_swapgs)
ENABLE_INTERRUPTS(CLBR_NONE)
ALLOC_PT_GPREGS_ON_STACK 8
SAVE_C_REGS_EXCEPT_RAX_RCX
- movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
- movq_cfi rax,(ORIG_RAX-ARGOFFSET)
- movq %rcx,RIP-ARGOFFSET(%rsp)
- CFI_REL_OFFSET rip,RIP-ARGOFFSET
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ movq $-ENOSYS,RAX(%rsp)
+ movq_cfi rax,(ORIG_RAX)
+ movq %rcx,RIP(%rsp)
+ CFI_REL_OFFSET rip,RIP
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP)
jnz tracesys
system_call_fastpath:
#if __SYSCALL_MASK == ~0
@@ -325,7 +325,7 @@ system_call_fastpath:
ja ret_from_sys_call /* and return regs->ax */
movq %r10,%rcx
call *sys_call_table(,%rax,8) # XXX: rip relative
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
/*
* Syscall return path ending with SYSRET (fast path)
* Has incomplete stack frame and undefined top of stack.
@@ -337,7 +337,7 @@ sysret_check:
LOCKDEP_SYS_EXIT
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx
+ movl TI_flags+THREAD_INFO(%rsp,RIP),%edx
andl %edi,%edx
jnz sysret_careful
CFI_REMEMBER_STATE
@@ -346,7 +346,7 @@ sysret_check:
*/
TRACE_IRQS_ON
RESTORE_C_REGS_EXCEPT_RCX
- movq RIP-ARGOFFSET(%rsp),%rcx
+ movq RIP(%rsp),%rcx
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
movq PER_CPU_VAR(old_rsp), %rsp
@@ -378,7 +378,7 @@ sysret_signal:
* These all wind up with the iret return path anyway,
* so just join that path right now.
*/
- FIXUP_TOP_OF_STACK %r11, -ARGOFFSET
+ FIXUP_TOP_OF_STACK %r11
jmp int_check_syscall_exit_work
#ifdef CONFIG_AUDITSYSCALL
@@ -388,7 +388,7 @@ sysret_signal:
* masked off.
*/
sysret_audit:
- movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */
+ movq RAX(%rsp),%rsi /* second arg, syscall return value */
cmpq $-MAX_ERRNO,%rsi /* is it < -MAX_ERRNO? */
setbe %al /* 1 if so, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
@@ -431,7 +431,7 @@ tracesys_phase2:
ja int_ret_from_sys_call /* RAX(%rsp) is already set */
movq %r10,%rcx /* fixup for C */
call *sys_call_table(,%rax,8)
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
/* Use IRET because user could have changed frame */
/*
@@ -515,9 +515,9 @@ END(stub_\func)
ENTRY(\label)
CFI_STARTPROC
DEFAULT_FRAME 0, 8 /* offset 8: return address */
- FIXUP_TOP_OF_STACK %r11, 8-ARGOFFSET
+ FIXUP_TOP_OF_STACK %r11, 8
call \func
- RESTORE_TOP_OF_STACK %r11, 8-ARGOFFSET
+ RESTORE_TOP_OF_STACK %r11, 8
ret
CFI_ENDPROC
END(\label)
@@ -717,7 +717,7 @@ common_interrupt:
ASM_CLAC
addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
interrupt do_IRQ
- /* 0(%rsp): old_rsp-ARGOFFSET */
+ /* 0(%rsp): old_rsp */
ret_from_intr:
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
@@ -727,13 +727,13 @@ ret_from_intr:
popq %rsi
CFI_DEF_CFA rsi,SS+8-RBP /* reg/off reset after def_cfa_expr */
/* return code expects complete pt_regs - adjust rsp accordingly: */
- leaq ARGOFFSET-RBP(%rsi), %rsp
+ leaq -RBP(%rsi), %rsp
CFI_DEF_CFA_REGISTER rsp
- CFI_ADJUST_CFA_OFFSET RBP-ARGOFFSET
+ CFI_ADJUST_CFA_OFFSET RBP
exit_intr:
GET_THREAD_INFO(%rcx)
- testl $3,CS-ARGOFFSET(%rsp)
+ testl $3,CS(%rsp)
je retint_kernel
/* Interrupt came from user space */
@@ -855,7 +855,7 @@ retint_signal:
ENTRY(retint_kernel)
cmpl $0,PER_CPU_VAR(__preempt_count)
jnz retint_restore_args
- bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
+ bt $9,EFLAGS(%rsp) /* interrupts off? */
jnc retint_restore_args
call preempt_schedule_irq
jmp exit_intr
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/