Re: How to handle access to multiple PHYs through MDIO

[Ray Jui]

On 1/16/2015 5:47 PM, Florian Fainelli wrote:
> Hi Ray,
> 
> On 16/01/15 17:10, Ray Jui wrote:
>> Hi,
>>
>> Our SoC, Cygnus, uses a generic MDC/MDIO controller to talk to various
>> PHYs, including 2 x Ethernet GPHY, 2 x PCIe Serdes, and 3 x USB PHYs. In
>> this case, how should I work out a generic PHY driver to handle this?
> 
> Interesting, I have typically seen separate MDIO controllers for at
> least Ethernet and USB/PCIe/SATA.
> 
>>
>> I notice that most generic PHY drivers are in drivers/phy/*, but
>> Ethernet seems to have its own interface of talking to a PHY through
>> MDIO (drivers/net/phy/*).
> 
> That's right, the Ethernet PHY library predates the generic PHY library
> from Kishon and they have little to no common ground.
> 
>>
>> I need a single driver to handle these so there isn't any race condition
>> for this single MDIO access in our system.
> 
> How about the following design:
> 
> - you create a MDIO bus controller library in e.g:
> drivers/phy/cygnus-mdio.c which offers generic generic read/write
> operations with a prototype looking like this:
> 
> 	int mdio_read(void *device, enum device_type, int reg, int addr);
> 	- int mdio_write(void *device, enum device_type, int reg, int addr, int
> value)
> 	- where device_type is MDIO_DEV_SERDES or MDIO_DEV_GPHY
> 
> 	- these reads and writes are protected by a local spinlock which is not
> exposed to the caller, it just needs to know that it gets serialized
> access to the controller
> 
> - you write a MDIO controller in drivers/phy/ for the USB and PCIe PHYs
> which uses this library and interfaces with Kishon's PHY Library operations
> 
> - you create a MDIO bus controller driver in drivers/net/phy/ which also
> uses this library and registers with Linux using mdiobus_register()
> 
> This is imho the easiest way to achieve what you want here, however, you
> could also stash all of what I describe above in a single MDIO bus
> driver in drivers/phy/ and ifdef out what is relevant based on your
> kernel configuration, up to you, there could be some tricky dependencies
> to solve though.
> 
Thanks, Florian. This makes sense to me.

Note this means I'll need to create public headers under include/linux
for the mdio library. But yes, having a shared mdio library and
protected with spinlock is the only way to guarantee serialized access
to the mdio controller.

Ray
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/