[PATCH] Staging: dgnc: fixed some coding style errors
From: Andrew Milkovich
Date: Sun Jan 18 2015 - 00:10:30 EST
This patch fixes the following checkpatch.pl error:
ERROR: Macros with complex values should be enclosed in parentheses
Outer parentheses were added to macro definitions.
Signed-off-by: Andrew Milkovich <amilkovich@xxxxxxxxx>
---
drivers/staging/dgnc/digi.h | 60 ++++++++++++++++++++++-----------------------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/dgnc/digi.h b/drivers/staging/dgnc/digi.h
index 3181a35..d6e0b9f 100644
--- a/drivers/staging/dgnc/digi.h
+++ b/drivers/staging/dgnc/digi.h
@@ -38,8 +38,8 @@
#if !defined(TIOCMODG)
-#define TIOCMODG ('d'<<8) | 250 /* get modem ctrl state */
-#define TIOCMODS ('d'<<8) | 251 /* set modem ctrl state */
+#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */
+#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */
#ifndef TIOCM_LE
#define TIOCM_LE 0x01 /* line enable */
@@ -58,44 +58,44 @@
#endif
#if !defined(TIOCMSET)
-#define TIOCMSET ('d'<<8) | 252 /* set modem ctrl state */
-#define TIOCMGET ('d'<<8) | 253 /* set modem ctrl state */
+#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */
+#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */
#endif
#if !defined(TIOCMBIC)
-#define TIOCMBIC ('d'<<8) | 254 /* set modem ctrl state */
-#define TIOCMBIS ('d'<<8) | 255 /* set modem ctrl state */
+#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */
+#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */
#endif
#if !defined(TIOCSDTR)
-#define TIOCSDTR ('e'<<8) | 0 /* set DTR */
-#define TIOCCDTR ('e'<<8) | 1 /* clear DTR */
+#define TIOCSDTR (('e'<<8) | 0) /* set DTR */
+#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */
#endif
/************************************************************************
* Ioctl command arguments for DIGI parameters.
************************************************************************/
-#define DIGI_GETA ('e'<<8) | 94 /* Read params */
+#define DIGI_GETA (('e'<<8) | 94) /* Read params */
-#define DIGI_SETA ('e'<<8) | 95 /* Set params */
-#define DIGI_SETAW ('e'<<8) | 96 /* Drain & set params */
-#define DIGI_SETAF ('e'<<8) | 97 /* Drain, flush & set params */
+#define DIGI_SETA (('e'<<8) | 95) /* Set params */
+#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */
+#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */
-#define DIGI_KME ('e'<<8) | 98 /* Read/Write Host */
+#define DIGI_KME (('e'<<8) | 98) /* Read/Write Host */
/* Adapter Memory */
-#define DIGI_GETFLOW ('e'<<8) | 99 /* Get startc/stopc flow */
+#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */
/* control characters */
-#define DIGI_SETFLOW ('e'<<8) | 100 /* Set startc/stopc flow */
+#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */
/* control characters */
-#define DIGI_GETAFLOW ('e'<<8) | 101 /* Get Aux. startc/stopc */
+#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */
/* flow control chars */
-#define DIGI_SETAFLOW ('e'<<8) | 102 /* Set Aux. startc/stopc */
+#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */
/* flow control chars */
-#define DIGI_GEDELAY ('d'<<8) | 246 /* Get edelay */
-#define DIGI_SEDELAY ('d'<<8) | 247 /* Set edelay */
+#define DIGI_GEDELAY (('d'<<8) | 246) /* Get edelay */
+#define DIGI_SEDELAY (('d'<<8) | 247) /* Set edelay */
struct digiflow_t {
unsigned char startc; /* flow cntl start char */
@@ -104,8 +104,8 @@ struct digiflow_t {
#ifdef FLOW_2200
-#define F2200_GETA ('e'<<8) | 104 /* Get 2x36 flow cntl flags */
-#define F2200_SETAW ('e'<<8) | 105 /* Set 2x36 flow cntl flags */
+#define F2200_GETA (('e'<<8) | 104) /* Get 2x36 flow cntl flags */
+#define F2200_SETAW (('e'<<8) | 105) /* Set 2x36 flow cntl flags */
#define F2200_MASK 0x03 /* 2200 flow cntl bit mask */
#define FCNTL_2200 0x01 /* 2x36 terminal flow cntl */
#define PCNTL_2200 0x02 /* 2x36 printer flow cntl */
@@ -241,7 +241,7 @@ struct digi_dinfo {
char dinfo_version[16]; /* driver version */
};
-#define DIGI_GETDD ('d'<<8) | 248 /* get driver info */
+#define DIGI_GETDD (('d'<<8) | 248) /* get driver info */
/************************************************************************
* Structure used with ioctl commands for per-board information
@@ -261,7 +261,7 @@ struct digi_info {
char info_reserved[7]; /* for future expansion */
};
-#define DIGI_GETBD ('d'<<8) | 249 /* get board info */
+#define DIGI_GETBD (('d'<<8) | 249) /* get board info */
struct digi_stat {
unsigned int info_chan; /* Channel number (0 based) */
@@ -276,7 +276,7 @@ struct digi_stat {
unsigned int info_reserved[8]; /* for future expansion */
};
-#define DIGI_GETSTAT ('d'<<8) | 244 /* get board info */
+#define DIGI_GETSTAT (('d'<<8) | 244) /* get board info */
/************************************************************************
*
* Structure used with ioctl commands for per-channel information
@@ -339,7 +339,7 @@ struct digi_getcounter {
#define INFO_CH_WLOW 0x0020
#define INFO_XXBUF_BUSY 0x0040
-#define DIGI_GETCH ('d'<<8) | 245 /* get board info */
+#define DIGI_GETCH (('d'<<8) | 245) /* get board info */
/* Board type definitions */
@@ -384,15 +384,15 @@ struct digi_getcounter {
#define BD_TRIBOOT 0x8
#define BD_BADKME 0x80
-#define DIGI_SPOLL ('d'<<8) | 254 /* change poller rate */
+#define DIGI_SPOLL (('d'<<8) | 254) /* change poller rate */
#define DIGI_SETCUSTOMBAUD _IOW('e', 106, int) /* Set integer baud rate */
#define DIGI_GETCUSTOMBAUD _IOR('e', 107, int) /* Get integer baud rate */
-#define DIGI_REALPORT_GETBUFFERS ('e'<<8) | 108
-#define DIGI_REALPORT_SENDIMMEDIATE ('e'<<8) | 109
-#define DIGI_REALPORT_GETCOUNTERS ('e'<<8) | 110
-#define DIGI_REALPORT_GETEVENTS ('e'<<8) | 111
+#define DIGI_REALPORT_GETBUFFERS (('e'<<8) | 108)
+#define DIGI_REALPORT_SENDIMMEDIATE (('e'<<8) | 109)
+#define DIGI_REALPORT_GETCOUNTERS (('e'<<8) | 110)
+#define DIGI_REALPORT_GETEVENTS (('e'<<8) | 111)
#define EV_OPU 0x0001 /* !<Output paused by client */
#define EV_OPS 0x0002 /* !<Output paused by reqular sw flowctrl */
--
2.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/