Re: [PATCH 3/4] toshiba_acpi: Add support for USB Rapid Charge

[Darren Hart]

On Wed, Jan 14, 2015 at 02:40:20PM -0700, Azael Avalos wrote:
> Newer Toshiba laptops equipped with USB 3.0 ports now have the
> functionality of rapid charging devices connected to their USB hubs.
> 
> This patch adds support to use such feature by creating a sysfs entry
> named "usb_rapid_charge", accepting only two values, 0 to disable and
> one to enable, however, the machine needs a restart everytime the

s/one/1//

> function is toggled.
> 
> Signed-off-by: Azael Avalos <coproscefalo@xxxxxxxxx>
> ---
>  drivers/platform/x86/toshiba_acpi.c | 107 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 107 insertions(+)
> 
> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
> index 9e054c5..eba5f9e 100644
> --- a/drivers/platform/x86/toshiba_acpi.c
> +++ b/drivers/platform/x86/toshiba_acpi.c
> @@ -155,6 +155,7 @@ MODULE_LICENSE("GPL");
>  #define SCI_USB_CHARGE_BAT_LVL_OFF	0x1
>  #define SCI_USB_CHARGE_BAT_LVL_ON	0x4
>  #define SCI_USB_CHARGE_BAT_LVL		0x0200
> +#define SCI_USB_CHARGE_RAPID_DSP	0x0300
>  
>  struct toshiba_acpi_dev {
>  	struct acpi_device *acpi_dev;
> @@ -188,6 +189,7 @@ struct toshiba_acpi_dev {
>  	unsigned int eco_supported:1;
>  	unsigned int accelerometer_supported:1;
>  	unsigned int usb_sleep_charge_supported:1;
> +	unsigned int usb_rapid_charge_supported:1;
>  	unsigned int sysfs_created:1;
>  
>  	struct mutex mutex;
> @@ -874,6 +876,60 @@ static int toshiba_sleep_functions_status_set(struct toshiba_acpi_dev *dev,
>  	return 0;
>  }
>  
> +static int toshiba_usb_rapid_charge_get(struct toshiba_acpi_dev *dev,
> +					u32 *state)
> +{
> +	u32 in[TCI_WORDS] = { SCI_GET, SCI_USB_SLEEP_CHARGE, 0, 0, 0, 0 };
> +	u32 out[TCI_WORDS];
> +	acpi_status status;
> +
> +	if (!sci_open(dev))
> +		return -EIO;
> +
> +	in[5] = SCI_USB_CHARGE_RAPID_DSP;
> +	status = tci_raw(dev, in, out);
> +	sci_close(dev);
> +	if (ACPI_FAILURE(status) || out[0] == TOS_FAILURE) {
> +		pr_err("ACPI call to get USB S&C battery level failed\n");
> +		return -EIO;
> +	} else if (out[0] == TOS_NOT_SUPPORTED ||
> +		   out[0] == TOS_INPUT_DATA_ERROR) {
> +		pr_info("USB Sleep and Charge not supported\n");
> +		return -ENODEV;
> +	}
> +

Same comment on return codes.

Although, on looking through the existing driver, I only see EIO, and internally
consistency is important.... we can stick with EIO for this driver.
-- 
Darren Hart
Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/