[PATCHv2] cleanup ti-soc-thermal
From: Pavel Machek
Date: Sun Jan 18 2015 - 15:17:17 EST
Simplify code by removing goto's where they point to simple return.
Avoid confusing |= on error values.
Correct whitespace.
Signed-off-by: Pavel Machek <pavel@xxxxxx>
---
Please apply,
Pavel
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 634b6ce..2fde78c 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -103,19 +105,15 @@ do { \
*/
static int ti_bandgap_power(struct ti_bandgap *bgp, bool on)
{
- int i, ret = 0;
+ int i;
- if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH)) {
- ret = -ENOTSUPP;
- goto exit;
- }
+ if (!TI_BANDGAP_HAS(bgp, POWER_SWITCH))
+ return -ENOTSUPP;
for (i = 0; i < bgp->conf->sensor_count; i++)
/* active on 0 */
RMW_BITS(bgp, i, temp_sensor_ctrl, bgap_tempsoff_mask, !on);
-
-exit:
- return ret;
+ return 0;
}
/**
@@ -263,18 +261,13 @@ static
int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
{
const struct ti_bandgap_data *conf = bgp->conf;
- int ret = 0;
/* look up for temperature in the table and return the temperature */
- if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val) {
- ret = -ERANGE;
- goto exit;
- }
+ if (adc_val < conf->adc_start_val || adc_val > conf->adc_end_val)
+ return -ERANGE;
*t = bgp->conf->conv_table[adc_val - conf->adc_start_val];
-
-exit:
- return ret;
+ return 0;
}
/**
@@ -295,16 +288,14 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
{
const struct ti_bandgap_data *conf = bgp->conf;
const int *conv_table = bgp->conf->conv_table;
- int high, low, mid, ret = 0;
+ int high, low, mid;
low = 0;
high = conf->adc_end_val - conf->adc_start_val;
mid = (high + low) / 2;
- if (temp < conv_table[low] || temp > conv_table[high]) {
- ret = -ERANGE;
- goto exit;
- }
+ if (temp < conv_table[low] || temp > conv_table[high])
+ return -ERANGE;
while (low < high) {
if (temp < conv_table[mid])
@@ -315,9 +306,7 @@ int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
}
*adc = conf->adc_start_val + low;
-
-exit:
- return ret;
+ return 0;
}
/**
@@ -343,13 +332,11 @@ int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
*/
ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
if (ret < 0)
- goto exit;
+ return ret;
temp += hyst_val;
ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
-
-exit:
return ret;
}
@@ -468,22 +455,18 @@ exit:
*/
static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
{
- int ret = 0;
-
if (!bgp || IS_ERR(bgp)) {
pr_err("%s: invalid bandgap pointer\n", __func__);
- ret = -EINVAL;
- goto exit;
+ return -EINVAL;
}
if ((id < 0) || (id >= bgp->conf->sensor_count)) {
dev_err(bgp->dev, "%s: sensor id out of range (%d)\n",
__func__, id);
- ret = -ERANGE;
+ return -ERANGE;
}
-exit:
- return ret;
+ return 0;
}
/**
@@ -511,12 +494,10 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
ret = ti_bandgap_validate(bgp, id);
if (ret)
- goto exit;
+ return ret;
- if (!TI_BANDGAP_HAS(bgp, TALERT)) {
- ret = -ENOTSUPP;
- goto exit;
- }
+ if (!TI_BANDGAP_HAS(bgp, TALERT))
+ return -ENOTSUPP;
ts_data = bgp->conf->sensors[id].ts_data;
tsr = bgp->conf->sensors[id].registers;
@@ -529,17 +510,15 @@ static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
}
if (ret)
- goto exit;
+ return ret;
ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
if (ret < 0)
- goto exit;
+ return ret;
spin_lock(&bgp->lock);
ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
spin_unlock(&bgp->lock);
-
-exit:
return ret;
}
@@ -582,7 +561,7 @@ static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
temp = (temp & mask) >> __ffs(mask);
- ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret) {
dev_err(bgp->dev, "failed to read thot\n");
ret = -EIO;
@@ -852,6 +831,6 @@ int ti_bandgap_read_temperature(struct ti_bandgap *bgp, int id,
spin_unlock(&bgp->lock);
- ret |= ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
+ ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
if (ret)
return -EIO;
@@ -1220,11 +1222,10 @@ int ti_bandgap_probe(struct platform_device *pdev)
goto free_irqs;
}
- bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
+ bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
ret = IS_ERR(bgp->div_clk);
if (ret) {
- dev_err(&pdev->dev,
- "failed to request div_ts_ck clock ref\n");
+ dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n");
ret = PTR_ERR(bgp->div_clk);
goto free_irqs;
}
index 5fd0386..33b2c01 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -76,7 +76,7 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
}
/* thermal zone ops */
-/* Get temperature callback function for thermal zone*/
+/* Get temperature callback function for thermal zone */
static inline int __ti_thermal_get_temp(void *devdata, long *temp)
{
struct thermal_zone_device *pcb_tz = NULL;
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/