[PATCH V2] regulator: da9211: Add gpio control for enable/disable of buck

[James Ban]

This is a patch for adding gpio control about enable/disable of buck.

Signed-off-by: James Ban <james.ban.opensource@xxxxxxxxxxx>
---

This patch is relative to linux-next repository tag next-20150115.

Changes in V2:
- gpio name from gpio to gpios.
- add ena_gpio_initialized.
 .../devicetree/bindings/regulator/da9211.txt       |    7 ++++++-
 drivers/regulator/da9211-regulator.c               |   16 ++++++++++++++++
 include/linux/regulator/da9211.h                   |    1 +
 3 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
index 240019a..a3b58e8 100644
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -11,6 +11,7 @@ Required properties:
   BUCKA and BUCKB.
 
 Optional properties:
+- buck-enable-platform-gpios: platform gpio for control of BUCKA/BUCKB.
 - Any optional property defined in regulator.txt
 
 Example 1) DA9211
@@ -27,6 +28,7 @@ Example 1) DA9211
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <2000000>;
 				regulator-max-microamp 	= <5000000>;
+				buck-enable-platform-gpios = <&gpio 27 0>;
 			};
 			BUCKB {
 				regulator-name = "VBUCKB";
@@ -34,11 +36,12 @@ Example 1) DA9211
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <2000000>;
 				regulator-max-microamp 	= <5000000>;
+				buck-enable-platform-gpios = <&gpio 17 0>;
 			};
 		};
 	};
 
-Example 2) DA92113
+Example 2) DA9213
 	pmic: da9213@68 {
 		compatible = "dlg,da9213";
 		reg = <0x68>;
@@ -51,6 +54,7 @@ Example 2) DA92113
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <3000000>;
 				regulator-max-microamp 	= <6000000>;
+				buck-enable-platform-gpios = <&gpio 27 0>;
 			};
 			BUCKB {
 				regulator-name = "VBUCKB";
@@ -58,6 +62,7 @@ Example 2) DA92113
 				regulator-max-microvolt = <1570000>;
 				regulator-min-microamp 	= <3000000>;
 				regulator-max-microamp 	= <6000000>;
+				buck-enable-platform-gpios = <&gpio 17 0>;
 			};
 		};
 	};
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index c78d210..84ab88f 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -24,6 +24,7 @@
 #include <linux/regmap.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/of_gpio.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/da9211.h>
 #include "da9211-regulator.h"
@@ -277,6 +278,10 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
 
 		pdata->init_data[n] = da9211_matches[i].init_data;
 
+		pdata->gpio_ren[n] =
+			of_get_named_gpio(da9211_matches[i].of_node,
+				"buck-enable-platform-gpios", 0);
+
 		n++;
 	}
 
@@ -366,6 +371,17 @@ static int da9211_regulator_init(struct da9211 *chip)
 		config.regmap = chip->regmap;
 		config.of_node = chip->dev->of_node;
 
+		if (gpio_is_valid(chip->pdata->gpio_ren[i])) {
+			config.ena_gpio = chip->pdata->gpio_ren[i];
+			config.ena_gpio_initialized = true;
+		} else {
+			config.ena_gpio = -EINVAL;
+			config.ena_gpio_initialized = false;
+			dev_warn(chip->dev,
+				"gpio control : GPIO[%d] not valid, ignoring\n",
+				chip->pdata->gpio_ren[i]);
+		}
+
 		chip->rdev[i] = devm_regulator_register(chip->dev,
 			&da9211_regulators[i], &config);
 		if (IS_ERR(chip->rdev[i])) {
diff --git a/include/linux/regulator/da9211.h b/include/linux/regulator/da9211.h
index 5479394..530b5ea 100644
--- a/include/linux/regulator/da9211.h
+++ b/include/linux/regulator/da9211.h
@@ -32,6 +32,7 @@ struct da9211_pdata {
 	 * 2 : 2 phase 2 buck
 	 */
 	int num_buck;
+	int gpio_ren[DA9211_MAX_REGULATORS];
 	struct regulator_init_data *init_data[DA9211_MAX_REGULATORS];
 };
 #endif
-- 
end-of-patch for regulator: da9211: Add gpio control for enable/disable of buck V2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/