Re: [PATCH v3 1/3] dt-bindings: mfd: add lubbock-io binding
From: Lee Jones
Date: Mon Jan 19 2015 - 03:35:44 EST
On Fri, 16 Jan 2015, Robert Jarzmik wrote:
> Add a binding for lubbock motherboard IO board.
>
> Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
> ---
> .../devicetree/bindings/mfd/lubbock-io.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/lubbock-io.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/lubbock-io.txt b/Documentation/devicetree/bindings/mfd/lubbock-io.txt
> new file mode 100644
> index 0000000..33c9e21
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/lubbock-io.txt
> @@ -0,0 +1,26 @@
> +Intel's pxa255 system development platform motherboard.
s/pxa25/PXA25/
"system development platform motherboard" doesn't quite sit right with me.
How about "Intel Xscale PXA255 development platform (Lubbock)"?
> +This is the motherboard, or IO board, of the pxa25x development system,
> +supporting a lubbock pxa25x SoC board.
Again, this sounds weird.
> +Required properties:
> + - compatible : One of the following chip-specific strings:
> + "intel,lubbock-io"
An odd thing to say with only one entry.
Also, please line it up to the right of the ':' above.
> + - interrupts : The first interrupt is the line the /IRQ signal the IO board
> + multiplex is connected to. The only known case is GPIO0 on the
> + pxa25x SoC.
Can you get someone to help you re-word this into a more fluid
sentence?
> +Optional properties:
> + - interrupts : The second optional interrupt is the base of the interrupts
> + multiplexed by the lubbock motherboard. If unspecified, the
> + range is fully dynamic, and the irqdomain will generate its
> + interrupt base on the fly.
> +
> +Example:
> +
> +mb: lubbock-mb@0 {
> + compatible = "intel,lubbock-io";
> + interrupts = <0 IRQ_TYPE_EDGE_FALLING 400 IRQ_TYPE_NONE>;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&pxairq>;
Whitespace error.
> +};
I'm guessing mb means motherboard? I think it's unusual for a
motherboard to have it's own driver. Usually we provide drivers for
the individual components/peripherals situated on the board.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/