Re: [PATCH tip 0/9] tracing: attach eBPF programs to tracepoints/syscalls/kprobe

[Masami Hiramatsu]

(2015/01/16 13:16), Alexei Starovoitov wrote:
> Hi Ingo, Steven,
> 
> This patch set is based on tip/master.
> It adds ability to attach eBPF programs to tracepoints, syscalls and kprobes.
> 
> Mechanism of attaching:
> - load program via bpf() syscall and receive program_fd
> - event_fd = open("/sys/kernel/debug/tracing/events/.../filter")
> - write 'bpf-123' to event_fd where 123 is program_fd
> - program will be attached to particular event and event automatically enabled
> - close(event_fd) will detach bpf program from event and event disabled
> 
> Program attach point and input arguments:
> - programs attached to kprobes receive 'struct pt_regs *' as an input.
>   See tracex4_kern.c that demonstrates how users can write a C program like:
>   SEC("events/kprobes/sys_write")
>   int bpf_prog4(struct pt_regs *regs)
>   {
>      long write_size = regs->dx; 
>      // here user need to know the proto of sys_write() from kernel
>      // sources and x64 calling convention to know that register $rdx
>      // contains 3rd argument to sys_write() which is 'size_t count'
> 
>   it's obviously architecture dependent, but allows building sophisticated
>   user tools on top, that can see from debug info of vmlinux which variables
>   are in which registers or stack locations and fetch it from there.
>   'perf probe' can potentialy use this hook to generate programs in user space
>   and insert them instead of letting kernel parse string during kprobe creation.

Actually, this program just shows raw pt_regs for handlers, but I guess it is also
possible to pass event arguments from perf probe which given by user and perf-probe.
If we can write the script as

int bpf_prog4(s64 write_size)
{
   ...
}

This will be much easier to play with.

> - programs attached to tracepoints and syscalls receive 'struct bpf_context *':
>   u64 arg1, arg2, ..., arg6;
>   for syscalls they match syscall arguments.
>   for tracepoints these args match arguments passed to tracepoint.
>   For example:
>   trace_sched_migrate_task(p, new_cpu); from sched/core.c
>   arg1 <- p        which is 'struct task_struct *'
>   arg2 <- new_cpu  which is 'unsigned int'
>   arg3..arg6 = 0
>   the program can use bpf_fetch_u8/16/32/64/ptr() helpers to walk 'task_struct'
>   or any other kernel data structures.
>   These helpers are using probe_kernel_read() similar to 'perf probe' which is
>   not 100% safe in both cases, but good enough.
>   To access task_struct's pid inside 'sched_migrate_task' tracepoint
>   the program can do:
>   struct task_struct *task = (struct task_struct *)ctx->arg1;
>   u32 pid = bpf_fetch_u32(&task->pid);
>   Since struct layout is kernel configuration specific such programs are not
>   portable and require access to kernel headers to be compiled,
>   but in this case we don't need debug info.
>   llvm with bpf backend will statically compute task->pid offset as a constant
>   based on kernel headers only.
>   The example of this arbitrary pointer walking is tracex1_kern.c
>   which does skb->dev->name == "lo" filtering.

At least I would like to see this way on kprobes event too, since it should be
treated as a traceevent.

> In all cases the programs are called before trace buffer is allocated to
> minimize the overhead, since we want to filter huge number of events, but
> buffer alloc/free and argument copy for every event is too costly.
> Theoretically we can invoke programs after buffer is allocated, but it
> doesn't seem needed, since above approach is faster and achieves the same.
> 
> Note, tracepoint/syscall and kprobe programs are two different types:
> BPF_PROG_TYPE_TRACING_FILTER and BPF_PROG_TYPE_KPROBE_FILTER,
> since they expect different input.
> Both use the same set of helper functions:
> - map access (lookup/update/delete)
> - fetch (probe_kernel_read wrappers)
> - memcmp (probe_kernel_read + memcmp)
> - dump_stack
> - trace_printk
> The last two are mainly to debug the programs and to print data for user
> space consumptions.
> 
> Portability:
> - kprobe programs are architecture dependent and need user scripting
>   language like ktap/stap/dtrace/perf that will dynamically generate
>   them based on debug info in vmlinux

If we can use kprobe event as a normal traceevent, user scripting can be
architecture independent too. Only perf-probe fills the gap. All other
userspace tools can collaborate with perf-probe to setup the events.
If so, we can avoid redundant works on debuginfo. That is my point.

Thank you,

> - tracepoint programs are architecture independent, but if arbitrary pointer
>   walking (with fetch() helpers) is used, they need data struct layout to match.
>   Debug info is not necessary
> - for networking use case we need to access 'struct sk_buff' fields in portable
>   way (user space needs to fetch packet length without knowing skb->len offset),
>   so for some frequently used data structures we will add helper functions
>   or pseudo instructions to access them. I've hacked few ways specifically
>   for skb, but abandoned them in favor of more generic type/field infra.
>   That work is still wip. Not part of this set.
>   Once it's ready tracepoint programs that access common data structs
>   will be kernel independent.
> 
> Program return value:
> - programs return 0 to discard an event
> - and return non-zero to proceed with event (allocate trace buffer, copy
>   arguments there and print it eventually in trace_pipe in traditional way)
> 
> Examples:
> - dropmon.c - simple kfree_skb() accounting in eBPF assembler, similar
>   to dropmon tool
> - tracex1_kern.c - does net/netif_receive_skb event filtering
>   for dev->skb->name == "lo" condition
> - tracex2_kern.c - same kfree_skb() accounting like dropmon, but now in C
>   plus computes histogram of all write sizes from sys_write syscall
>   and prints the histogram in userspace
> - tracex3_kern.c - most sophisticated example that computes IO latency
>   between block/block_rq_issue and block/block_rq_complete events
>   and prints 'heatmap' using gray shades of text terminal.
>   Useful to analyze disk performance.
> - tracex4_kern.c - computes histogram of write sizes from sys_write syscall
>   using kprobe mechanism instead of syscall. Since kprobe is optimized into
>   ftrace the overhead of instrumentation is smaller than in example 2.
> 
> The user space tools like ktap/dtrace/systemptap/perf that has access
> to debug info would probably want to use kprobe attachment point, since kprobe
> can be inserted anywhere and all registers are avaiable in the program.
> tracepoint attachments are useful without debug info, so standalone tools
> like iosnoop will use them.
> 
> The main difference vs existing perf_probe/ftrace infra is in kernel aggregation
> and conditional walking of arbitrary data structures.
> 
> Thanks!
> 
> Alexei Starovoitov (9):
>   tracing: attach eBPF programs to tracepoints and syscalls
>   tracing: allow eBPF programs to call bpf_printk()
>   tracing: allow eBPF programs to call ktime_get_ns()
>   samples: bpf: simple tracing example in eBPF assembler
>   samples: bpf: simple tracing example in C
>   samples: bpf: counting example for kfree_skb tracepoint and write
>     syscall
>   samples: bpf: IO latency analysis (iosnoop/heatmap)
>   tracing: attach eBPF programs to kprobe/kretprobe
>   samples: bpf: simple kprobe example
> 
>  include/linux/ftrace_event.h       |    6 +
>  include/trace/bpf_trace.h          |   25 ++++
>  include/trace/ftrace.h             |   30 +++++
>  include/uapi/linux/bpf.h           |   11 ++
>  kernel/trace/Kconfig               |    1 +
>  kernel/trace/Makefile              |    1 +
>  kernel/trace/bpf_trace.c           |  250 ++++++++++++++++++++++++++++++++++++
>  kernel/trace/trace.h               |    3 +
>  kernel/trace/trace_events.c        |   41 +++++-
>  kernel/trace/trace_events_filter.c |   80 +++++++++++-
>  kernel/trace/trace_kprobe.c        |   11 +-
>  kernel/trace/trace_syscalls.c      |   31 +++++
>  samples/bpf/Makefile               |   18 +++
>  samples/bpf/bpf_helpers.h          |   18 +++
>  samples/bpf/bpf_load.c             |   62 ++++++++-
>  samples/bpf/bpf_load.h             |    3 +
>  samples/bpf/dropmon.c              |  129 +++++++++++++++++++
>  samples/bpf/tracex1_kern.c         |   28 ++++
>  samples/bpf/tracex1_user.c         |   24 ++++
>  samples/bpf/tracex2_kern.c         |   71 ++++++++++
>  samples/bpf/tracex2_user.c         |   95 ++++++++++++++
>  samples/bpf/tracex3_kern.c         |   96 ++++++++++++++
>  samples/bpf/tracex3_user.c         |  146 +++++++++++++++++++++
>  samples/bpf/tracex4_kern.c         |   36 ++++++
>  samples/bpf/tracex4_user.c         |   83 ++++++++++++
>  25 files changed, 1290 insertions(+), 9 deletions(-)
>  create mode 100644 include/trace/bpf_trace.h
>  create mode 100644 kernel/trace/bpf_trace.c
>  create mode 100644 samples/bpf/dropmon.c
>  create mode 100644 samples/bpf/tracex1_kern.c
>  create mode 100644 samples/bpf/tracex1_user.c
>  create mode 100644 samples/bpf/tracex2_kern.c
>  create mode 100644 samples/bpf/tracex2_user.c
>  create mode 100644 samples/bpf/tracex3_kern.c
>  create mode 100644 samples/bpf/tracex3_user.c
>  create mode 100644 samples/bpf/tracex4_kern.c
>  create mode 100644 samples/bpf/tracex4_user.c
> 


-- 
Masami HIRAMATSU
Software Platform Research Dept. Linux Technology Center
Hitachi, Ltd., Yokohama Research Laboratory
E-mail: masami.hiramatsu.pt@xxxxxxxxxxx


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/