Re: [alsa-devel][PATCH 3/3] ASoC: fsl_sai: Add support for Right-J mode

[Zidan Wang]

On Wed, Jan 21, 2015 at 10:53:20AM -0800, Nicolin Chen wrote:
> On Tue, Jan 20, 2015 at 08:21:20PM +0800, Zidan Wang wrote:
> > Add Right-J mode and set TCR5 FBT bit to let data right justify.
> > 
> > Signed-off-by: Zidan Wang <zidan.wang@xxxxxxxxxxxxx>
> 
> > -	if (sai->is_lsb_first)
> > +	if (sai->is_lsb_first && sai->is_right_j_mode)
> >  		val_cr5 |= FSL_SAI_CR5_FBT(0);
> 
> Are you sure that FBT(0) is correct for right justified mode?
> Because the original code is using FBT(0) for the lsb_first
> situation and it shouldn't be right justified mode as default.
>
I am not sure about that. 

I assume lsb_first as big endian data.

For 16 bit data format, the 2 bytes data will in high address of 4 bytes
fifo. So the FBT is 16 for left-j and 0 for right-j. But big endian is
bytes convert not bits convert. It makes me confuse. And send to
community for help.

> Nicolin
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/