[PATCH v2 5/9] mfd: rtsx: update phy register
From: micky_ching
Date: Thu Jan 22 2015 - 02:04:33 EST
From: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
update phy register value and using direct value instead of macros.
It is much easier to debug using constant value than a lot of macros.
We usually need compare the value directly to check the configure.
Signed-off-by: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
---
drivers/mfd/rts5249.c | 55 ++++++++++++----------
include/linux/mfd/rtsx_pci.h | 109 ++++++++++++++++++++++---------------------
2 files changed, 85 insertions(+), 79 deletions(-)
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index 2fe2854..d8072f6 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -132,57 +132,62 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
if (err < 0)
return err;
- err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
- PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
- PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
- PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 |
- PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR);
+ err = rtsx_pci_write_phy_register(pcr, PHY_REV,
+ PHY_REV_RESV | PHY_REV_RXIDLE_LATCHED |
+ PHY_REV_P1_EN | PHY_REV_RXIDLE_EN |
+ PHY_REV_CLKREQ_TX_EN | PHY_REV_RX_PWST |
+ PHY_REV_CLKREQ_DT_1_0 | PHY_REV_STOP_CLKRD |
+ PHY_REV_STOP_CLKWR);
if (err < 0)
return err;
msleep(1);
err = rtsx_pci_write_phy_register(pcr, PHY_BPCR,
- PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
- PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
+ PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
+ PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
if (err < 0)
return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_PCR,
- PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
- PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
- PHY_PCR_RSSI_EN);
+ PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
+ PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
+ PHY_PCR_RSSI_EN | PHY_PCR_RX10K);
if (err < 0)
return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
- PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR |
- PHY_RCR2_CDR_CP_10 | PHY_RCR2_CDR_SR_2 |
- PHY_RCR2_FREQSEL_12 | PHY_RCR2_CPADJEN |
- PHY_RCR2_CDR_SC_8 | PHY_RCR2_CALIB_LATE);
+ PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR |
+ PHY_RCR2_CDR_SR_2 | PHY_RCR2_FREQSEL_12 |
+ PHY_RCR2_CDR_SC_12P | PHY_RCR2_CALIB_LATE);
if (err < 0)
return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_FLD4,
- PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF |
- PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA |
- PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER |
- PHY_FLD4_BER_CHK_EN);
+ PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF |
+ PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA |
+ PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER |
+ PHY_FLD4_BER_CHK_EN);
if (err < 0)
return err;
- err = rtsx_pci_write_phy_register(pcr, PHY_RDR, PHY_RDR_RXDSEL_1_9);
+ err = rtsx_pci_write_phy_register(pcr, PHY_RDR,
+ PHY_RDR_RXDSEL_1_9 | PHY_SSC_AUTO_PWD);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_RCR1,
- PHY_RCR1_ADP_TIME | PHY_RCR1_VCO_COARSE);
+ PHY_RCR1_ADP_TIME_4 | PHY_RCR1_VCO_COARSE);
if (err < 0)
return err;
err = rtsx_pci_write_phy_register(pcr, PHY_FLD3,
- PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 |
- PHY_FLD3_RXDELINK);
+ PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 |
+ PHY_FLD3_RXDELINK);
if (err < 0)
return err;
+
return rtsx_pci_write_phy_register(pcr, PHY_TUNE,
- PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 |
- PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 |
- PHY_TUNE_TUNED12);
+ PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 |
+ PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 |
+ PHY_TUNE_TUNED12 | PHY_TUNE_TUNEA12);
}
static int rts5249_turn_on_led(struct rtsx_pcr *pcr)
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 87cff60..0103210 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -630,16 +630,47 @@
/* Phy register */
#define PHY_PCR 0x00
+#define PHY_PCR_FORCE_CODE 0xB000
+#define PHY_PCR_OOBS_CALI_50 0x0800
+#define PHY_PCR_OOBS_VCM_08 0x0200
+#define PHY_PCR_OOBS_SEN_90 0x0040
+#define PHY_PCR_RSSI_EN 0x0002
+#define PHY_PCR_RX10K 0x0001
+
#define PHY_RCR0 0x01
#define PHY_RCR1 0x02
+#define PHY_RCR1_ADP_TIME_4 0x0400
+#define PHY_RCR1_VCO_COARSE 0x001F
+
#define PHY_RCR2 0x03
+#define PHY_RCR2_EMPHASE_EN 0x8000
+#define PHY_RCR2_NADJR 0x4000
+#define PHY_RCR2_CDR_SR_2 0x0100
+#define PHY_RCR2_FREQSEL_12 0x0040
+#define PHY_RCR2_CDR_SC_12P 0x0010
+#define PHY_RCR2_CALIB_LATE 0x0002
+
#define PHY_RTCR 0x04
#define PHY_RDR 0x05
+#define PHY_RDR_RXDSEL_1_9 0x4000
+#define PHY_SSC_AUTO_PWD 0x0600
#define PHY_TCR0 0x06
#define PHY_TCR1 0x07
#define PHY_TUNE 0x08
+#define PHY_TUNE_TUNEREF_1_0 0x4000
+#define PHY_TUNE_VBGSEL_1252 0x0C00
+#define PHY_TUNE_SDBUS_33 0x0200
+#define PHY_TUNE_TUNED18 0x01C0
+#define PHY_TUNE_TUNED12 0X0020
+#define PHY_TUNE_TUNEA12 0x0004
+
#define PHY_IMR 0x09
#define PHY_BPCR 0x0A
+#define PHY_BPCR_IBRXSEL 0x0400
+#define PHY_BPCR_IBTXSEL 0x0100
+#define PHY_BPCR_IB_FILTER 0x0080
+#define PHY_BPCR_CMIRROR_EN 0x0040
+
#define PHY_BIST 0x0B
#define PHY_RAW_L 0x0C
#define PHY_RAW_H 0x0D
@@ -654,12 +685,35 @@
#define PHY_BPNR 0x16
#define PHY_BRNR2 0x17
#define PHY_BENR 0x18
-#define PHY_REG_REV 0x19
+#define PHY_REV 0x19
+#define PHY_REV_RESV 0xE000
+#define PHY_REV_RXIDLE_LATCHED 0x1000
+#define PHY_REV_P1_EN 0x0800
+#define PHY_REV_RXIDLE_EN 0x0400
+#define PHY_REV_CLKREQ_TX_EN 0x0200
+#define PHY_REV_CLKREQ_RX_EN 0x0100
+#define PHY_REV_CLKREQ_DT_1_0 0x0040
+#define PHY_REV_STOP_CLKRD 0x0020
+#define PHY_REV_RX_PWST 0x0008
+#define PHY_REV_STOP_CLKWR 0x0004
+
#define PHY_FLD0 0x1A
#define PHY_FLD1 0x1B
#define PHY_FLD2 0x1C
#define PHY_FLD3 0x1D
+#define PHY_FLD3_TIMER_4 0x0800
+#define PHY_FLD3_TIMER_6 0x0020
+#define PHY_FLD3_RXDELINK 0x0004
+
#define PHY_FLD4 0x1E
+#define PHY_FLD4_FLDEN_SEL 0x4000
+#define PHY_FLD4_REQ_REF 0x2000
+#define PHY_FLD4_RXAMP_OFF 0x1000
+#define PHY_FLD4_REQ_ADDA 0x0800
+#define PHY_FLD4_BER_COUNT 0x00E0
+#define PHY_FLD4_BER_TIMER 0x000A
+#define PHY_FLD4_BER_CHK_EN 0x0001
+
#define PHY_DUM_REG 0x1F
#define LCTLR 0x80
@@ -675,59 +729,6 @@
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
-/* Phy bits */
-#define PHY_PCR_FORCE_CODE 0xB000
-#define PHY_PCR_OOBS_CALI_50 0x0800
-#define PHY_PCR_OOBS_VCM_08 0x0200
-#define PHY_PCR_OOBS_SEN_90 0x0040
-#define PHY_PCR_RSSI_EN 0x0002
-
-#define PHY_RCR1_ADP_TIME 0x0100
-#define PHY_RCR1_VCO_COARSE 0x001F
-
-#define PHY_RCR2_EMPHASE_EN 0x8000
-#define PHY_RCR2_NADJR 0x4000
-#define PHY_RCR2_CDR_CP_10 0x0400
-#define PHY_RCR2_CDR_SR_2 0x0100
-#define PHY_RCR2_FREQSEL_12 0x0040
-#define PHY_RCR2_CPADJEN 0x0020
-#define PHY_RCR2_CDR_SC_8 0x0008
-#define PHY_RCR2_CALIB_LATE 0x0002
-
-#define PHY_RDR_RXDSEL_1_9 0x4000
-
-#define PHY_TUNE_TUNEREF_1_0 0x4000
-#define PHY_TUNE_VBGSEL_1252 0x0C00
-#define PHY_TUNE_SDBUS_33 0x0200
-#define PHY_TUNE_TUNED18 0x01C0
-#define PHY_TUNE_TUNED12 0X0020
-
-#define PHY_BPCR_IBRXSEL 0x0400
-#define PHY_BPCR_IBTXSEL 0x0100
-#define PHY_BPCR_IB_FILTER 0x0080
-#define PHY_BPCR_CMIRROR_EN 0x0040
-
-#define PHY_REG_REV_RESV 0xE000
-#define PHY_REG_REV_RXIDLE_LATCHED 0x1000
-#define PHY_REG_REV_P1_EN 0x0800
-#define PHY_REG_REV_RXIDLE_EN 0x0400
-#define PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 0x0040
-#define PHY_REG_REV_STOP_CLKRD 0x0020
-#define PHY_REG_REV_RX_PWST 0x0008
-#define PHY_REG_REV_STOP_CLKWR 0x0004
-
-#define PHY_FLD3_TIMER_4 0x7800
-#define PHY_FLD3_TIMER_6 0x00E0
-#define PHY_FLD3_RXDELINK 0x0004
-
-#define PHY_FLD4_FLDEN_SEL 0x4000
-#define PHY_FLD4_REQ_REF 0x2000
-#define PHY_FLD4_RXAMP_OFF 0x1000
-#define PHY_FLD4_REQ_ADDA 0x0800
-#define PHY_FLD4_BER_COUNT 0x00E0
-#define PHY_FLD4_BER_TIMER 0x000A
-#define PHY_FLD4_BER_CHK_EN 0x0001
-
#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0)
struct rtsx_pcr;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/