Re: [PATCH v3 2/3] media: au0828 - convert to use videobuf2
From: Shuah Khan
Date: Thu Jan 22 2015 - 17:27:37 EST
On 01/22/2015 01:47 PM, Lad, Prabhakar wrote:
> Hi Shuah,
>
> On Thu, Jan 22, 2015 at 4:16 PM, Shuah Khan <shuahkh@xxxxxxxxxxxxxxx> wrote:
>> Hi Prabhakar,
>>
> [snip]
>>>> + buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED;
>>>> + v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp);
>>>> + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
>>>> }
>>>>
>>> Why not just have one single buffer_filled function ? just check the
>>> queue type and assign the dev->isoc_ctl.buf/ dev->isoc_ctl.vbi_buf
>>> to NULL.
>>
>> Yes. These two routines could be collapsed into a single. Is it okay if
>> I made that change in a separate patch?
>>
> hmm.. this can go as a separate patch.
Thanks. Looked into this a bit more. It is definitely better done as a
separate patch.
>
>>>
>>>> /*
>>>> @@ -353,8 +340,8 @@ static void au0828_copy_video(struct au0828_dev *dev,
>>>> if (len == 0)
>>>> return;
>>>>
>>>> - if (dma_q->pos + len > buf->vb.size)
>>>> - len = buf->vb.size - dma_q->pos;
>>>> + if (dma_q->pos + len > buf->length)
>>>> + len = buf->length - dma_q->pos;
>>>>
>>>> startread = p;
>>>> remain = len;
>>>> @@ -372,11 +359,11 @@ static void au0828_copy_video(struct au0828_dev *dev,
>>>> lencopy = bytesperline - currlinedone;
>>>> lencopy = lencopy > remain ? remain : lencopy;
>>>>
>>>> - if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) {
>>>> + if ((char *)startwrite + lencopy > (char *)outp + buf->length) {
>>>> au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n",
>>>> ((char *)startwrite + lencopy) -
>>>> - ((char *)outp + buf->vb.size));
>>>> - remain = (char *)outp + buf->vb.size - (char *)startwrite;
>>>> + ((char *)outp + buf->length));
>>>> + remain = (char *)outp + buf->length - (char *)startwrite;
>>>> lencopy = remain;
>>>> }
>>>> if (lencopy <= 0)
>>>> @@ -394,11 +381,11 @@ static void au0828_copy_video(struct au0828_dev *dev,
>>>> lencopy = bytesperline;
>>>>
>>>> if ((char *)startwrite + lencopy > (char *)outp +
>>>> - buf->vb.size) {
>>>> + buf->length) {
>>>> au0828_isocdbg("Overflow %zi bytes past buf end (2)\n",
>>>> ((char *)startwrite + lencopy) -
>>>> - ((char *)outp + buf->vb.size));
>>>> - lencopy = remain = (char *)outp + buf->vb.size -
>>>> + ((char *)outp + buf->length));
>>>> + lencopy = remain = (char *)outp + buf->length -
>>>> (char *)startwrite;
>>>> }
>>>> if (lencopy <= 0)
>>>> @@ -434,7 +421,11 @@ static inline void get_next_buf(struct au0828_dmaqueue *dma_q,
>>>> }
>>>>
>>>> /* Get the next buffer */
>>>> - *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue);
>>>> + *buf = list_entry(dma_q->active.next, struct au0828_buffer, list);
>>>> + /* Cleans up buffer - Useful for testing for frame/URB loss */
>>>> + list_del(&(*buf)->list);
>>>> + dma_q->pos = 0;
>>>> + (*buf)->vb_buf = (*buf)->mem;
>>>> dev->isoc_ctl.buf = *buf;
>>>>
>>>> return;
>>>> @@ -472,8 +463,8 @@ static void au0828_copy_vbi(struct au0828_dev *dev,
>>>>
>>>> bytesperline = dev->vbi_width;
>>>>
>>>> - if (dma_q->pos + len > buf->vb.size)
>>>> - len = buf->vb.size - dma_q->pos;
>>>> + if (dma_q->pos + len > buf->length)
>>>> + len = buf->length - dma_q->pos;
>>>>
>>>> startread = p;
>>>> startwrite = outp + (dma_q->pos / 2);
>>>> @@ -496,7 +487,6 @@ static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q,
>>>> struct au0828_buffer **buf)
>>>> {
>>>> struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vbiq);
>>>> - char *outp;
>>>>
>>>> if (list_empty(&dma_q->active)) {
>>>> au0828_isocdbg("No active queue to serve\n");
>>>> @@ -506,13 +496,12 @@ static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q,
>>>> }
>>>>
>>>> /* Get the next buffer */
>>>> - *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue);
>>>> + *buf = list_entry(dma_q->active.next, struct au0828_buffer, list);
>>>> /* Cleans up buffer - Useful for testing for frame/URB loss */
>>>> - outp = videobuf_to_vmalloc(&(*buf)->vb);
>>>> - memset(outp, 0x00, (*buf)->vb.size);
>>>> -
>>>> + list_del(&(*buf)->list);
>>>> + dma_q->pos = 0;
>>>> + (*buf)->vb_buf = (*buf)->mem;
>>>> dev->isoc_ctl.vbi_buf = *buf;
>>>> -
>>>> return;
>>>> }
>>>>
>>>> @@ -548,11 +537,11 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
>>>>
>>>> buf = dev->isoc_ctl.buf;
>>>> if (buf != NULL)
>>>> - outp = videobuf_to_vmalloc(&buf->vb);
>>>> + outp = vb2_plane_vaddr(&buf->vb, 0);
>>>>
>>>> vbi_buf = dev->isoc_ctl.vbi_buf;
>>>> if (vbi_buf != NULL)
>>>> - vbioutp = videobuf_to_vmalloc(&vbi_buf->vb);
>>>> + vbioutp = vb2_plane_vaddr(&vbi_buf->vb, 0);
>>>>
>>>> for (i = 0; i < urb->number_of_packets; i++) {
>>>> int status = urb->iso_frame_desc[i].status;
>>>> @@ -592,8 +581,8 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
>>>> if (vbi_buf == NULL)
>>>> vbioutp = NULL;
>>>> else
>>>> - vbioutp = videobuf_to_vmalloc(
>>>> - &vbi_buf->vb);
>>>> + vbioutp = vb2_plane_vaddr(
>>>> + &vbi_buf->vb, 0);
>>>>
>>>> /* Video */
>>>> if (buf != NULL)
>>>> @@ -602,7 +591,7 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
>>>> if (buf == NULL)
>>>> outp = NULL;
>>>> else
>>>> - outp = videobuf_to_vmalloc(&buf->vb);
>>>> + outp = vb2_plane_vaddr(&buf->vb, 0);
>>>>
>>>> /* As long as isoc traffic is arriving, keep
>>>> resetting the timer */
>>>> @@ -656,130 +645,59 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
>>>> return rc;
>>>> }
>>>>
>>>> -static int
>>>> -buffer_setup(struct videobuf_queue *vq, unsigned int *count,
>>>> - unsigned int *size)
>>>> +static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
>>>> + unsigned int *nbuffers, unsigned int *nplanes,
>>>> + unsigned int sizes[], void *alloc_ctxs[])
>>>> {
>>>> - struct au0828_fh *fh = vq->priv_data;
>>>> - *size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3;
>>>> -
>>>> - if (0 == *count)
>>>> - *count = AU0828_DEF_BUF;
>>>> + struct au0828_dev *dev = vb2_get_drv_priv(vq);
>>>> + unsigned long img_size = dev->height * dev->bytesperline;
>>>> + unsigned long size;
>>>>
>>>> - if (*count < AU0828_MIN_BUF)
>>>> - *count = AU0828_MIN_BUF;
>>>> - return 0;
>>>> -}
>>>> + size = fmt ? fmt->fmt.pix.sizeimage : img_size;
>>>> + if (size < img_size)
>>>> + return -EINVAL;
>>>>
>>>> -/* This is called *without* dev->slock held; please keep it that way */
>>>> -static void free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf)
>>>> -{
>>>> - struct au0828_fh *fh = vq->priv_data;
>>>> - struct au0828_dev *dev = fh->dev;
>>>> - unsigned long flags = 0;
>>>> - if (in_interrupt())
>>>> - BUG();
>>>> -
>>>> - /* We used to wait for the buffer to finish here, but this didn't work
>>>> - because, as we were keeping the state as VIDEOBUF_QUEUED,
>>>> - videobuf_queue_cancel marked it as finished for us.
>>>> - (Also, it could wedge forever if the hardware was misconfigured.)
>>>> -
>>>> - This should be safe; by the time we get here, the buffer isn't
>>>> - queued anymore. If we ever start marking the buffers as
>>>> - VIDEOBUF_ACTIVE, it won't be, though.
>>>> - */
>>>> - spin_lock_irqsave(&dev->slock, flags);
>>>> - if (dev->isoc_ctl.buf == buf)
>>>> - dev->isoc_ctl.buf = NULL;
>>>> - spin_unlock_irqrestore(&dev->slock, flags);
>>>> + *nplanes = 1;
>>>> + sizes[0] = size;
>>>>
>>>> - videobuf_vmalloc_free(&buf->vb);
>>>> - buf->vb.state = VIDEOBUF_NEEDS_INIT;
>>>> + return 0;
>>>> }
>>>>
>>>> static int
>>>> -buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
>>>> - enum v4l2_field field)
>>>> +buffer_prepare(struct vb2_buffer *vb)
>>>> {
>>>> - struct au0828_fh *fh = vq->priv_data;
>>>> struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb);
>>>> - struct au0828_dev *dev = fh->dev;
>>>> - int rc = 0, urb_init = 0;
>>>> + struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
>>>>
>>>> - buf->vb.size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3;
>>>> + buf->length = dev->height * dev->bytesperline;
>>>>
>>>> - if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
>>>> + if (vb2_plane_size(vb, 0) < buf->length) {
>>>> + pr_err("%s data will not fit into plane (%lu < %lu)\n",
>>>> + __func__, vb2_plane_size(vb, 0), buf->length);
>>>> return -EINVAL;
>>>> -
>>>> - buf->vb.width = dev->width;
>>>> - buf->vb.height = dev->height;
>>>> - buf->vb.field = field;
>>>> -
>>>> - if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
>>>> - rc = videobuf_iolock(vq, &buf->vb, NULL);
>>>> - if (rc < 0) {
>>>> - pr_info("videobuf_iolock failed\n");
>>>> - goto fail;
>>>> - }
>>>> }
>>>> -
>>>> - if (!dev->isoc_ctl.num_bufs)
>>>> - urb_init = 1;
>>>> -
>>>> - if (urb_init) {
>>>> - rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB,
>>>> - AU0828_MAX_ISO_BUFS, dev->max_pkt_size,
>>>> - au0828_isoc_copy);
>>>> - if (rc < 0) {
>>>> - pr_info("au0828_init_isoc failed\n");
>>>> - goto fail;
>>>> - }
>>>> - }
>>>> -
>>>> - buf->vb.state = VIDEOBUF_PREPARED;
>>>> + vb2_set_plane_payload(&buf->vb, 0, buf->length);
>>>> return 0;
>>>> -
>>>> -fail:
>>>> - free_buffer(vq, buf);
>>>> - return rc;
>>>> }
>>>>
>>>> static void
>>>> -buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
>>>> +buffer_queue(struct vb2_buffer *vb)
>>>> {
>>>> struct au0828_buffer *buf = container_of(vb,
>>>> struct au0828_buffer,
>>>> vb);
>>>> - struct au0828_fh *fh = vq->priv_data;
>>>> - struct au0828_dev *dev = fh->dev;
>>>> + struct au0828_dev *dev = vb2_get_drv_priv(vb->vb2_queue);
>>>> struct au0828_dmaqueue *vidq = &dev->vidq;
>>>> + unsigned long flags = 0;
>>>>
>>>> - buf->vb.state = VIDEOBUF_QUEUED;
>>>> - list_add_tail(&buf->vb.queue, &vidq->active);
>>>> -}
>>>> -
>>>> -static void buffer_release(struct videobuf_queue *vq,
>>>> - struct videobuf_buffer *vb)
>>>> -{
>>>> - struct au0828_buffer *buf = container_of(vb,
>>>> - struct au0828_buffer,
>>>> - vb);
>>>> + buf->mem = vb2_plane_vaddr(vb, 0);
>>>> + buf->length = vb2_plane_size(vb, 0);
>>>>
>>>> - free_buffer(vq, buf);
>>>> + spin_lock_irqsave(&dev->slock, flags);
>>>> + list_add_tail(&buf->list, &vidq->active);
>>>> + spin_unlock_irqrestore(&dev->slock, flags);
>>>> }
>>>>
>>>> -static struct videobuf_queue_ops au0828_video_qops = {
>>>> - .buf_setup = buffer_setup,
>>>> - .buf_prepare = buffer_prepare,
>>>> - .buf_queue = buffer_queue,
>>>> - .buf_release = buffer_release,
>>>> -};
>>>> -
>>>> -/* ------------------------------------------------------------------
>>>> - V4L2 interface
>>>> - ------------------------------------------------------------------*/
>>>> -
>>>> static int au0828_i2s_init(struct au0828_dev *dev)
>>>> {
>>>> /* Enable i2s mode */
>>>> @@ -828,7 +746,7 @@ static int au0828_analog_stream_enable(struct au0828_dev *d)
>>>> return 0;
>>>> }
>>>>
>>>> -int au0828_analog_stream_disable(struct au0828_dev *d)
>>>> +static int au0828_analog_stream_disable(struct au0828_dev *d)
>>>> {
>>>> dprintk(1, "au0828_analog_stream_disable called\n");
>>>> au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0);
>>>> @@ -861,78 +779,141 @@ static int au0828_stream_interrupt(struct au0828_dev *dev)
>>>> return 0;
>>>> }
>>>>
>>>> -/*
>>>> - * au0828_release_resources
>>>> - * unregister v4l2 devices
>>>> - */
>>>> -void au0828_analog_unregister(struct au0828_dev *dev)
>>>> +int au0828_start_analog_streaming(struct vb2_queue *vq, unsigned int count)
>>>> {
>>>> - dprintk(1, "au0828_release_resources called\n");
>>>> - mutex_lock(&au0828_sysfs_lock);
>>>> + struct au0828_dev *dev = vb2_get_drv_priv(vq);
>>>> + int rc = 0;
>>>>
>>>> - if (dev->vdev)
>>>> - video_unregister_device(dev->vdev);
>>>> - if (dev->vbi_dev)
>>>> - video_unregister_device(dev->vbi_dev);
>>>> + dprintk(1, "au0828_start_analog_streaming called %d\n",
>>>> + dev->streaming_users);
>>>>
>>>> - mutex_unlock(&au0828_sysfs_lock);
>>>> -}
>>>> + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
>>>> + dev->frame_count = 0;
>>>> + else
>>>> + dev->vbi_frame_count = 0;
>>>> +
>>>> + if (dev->streaming_users == 0) {
>>>> + /* If we were doing ac97 instead of i2s, it would go here...*/
>>>> + au0828_i2s_init(dev);
>>>> + rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB,
>>>> + AU0828_MAX_ISO_BUFS, dev->max_pkt_size,
>>>> + au0828_isoc_copy);
>>>> + if (rc < 0) {
>>>> + pr_info("au0828_init_isoc failed\n");
>>>> + return rc;
>>>> + }
>>>>
>>>> + if (vq->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
>>>> + v4l2_device_call_all(&dev->v4l2_dev, 0, video,
>>>> + s_stream, 1);
>>>> + dev->vid_timeout_running = 1;
>>>> + mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
>>>> + } else if (vq->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
>>>> + dev->vbi_timeout_running = 1;
>>>> + mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
>>>> + }
>>>> + }
>>>> + dev->streaming_users++;
>>>> + return rc;
>>>> +}
>>>>
>>>> -/* Usage lock check functions */
>>>> -static int res_get(struct au0828_fh *fh, unsigned int bit)
>>>> +static void au0828_stop_streaming(struct vb2_queue *vq)
>>>> {
>>>> - struct au0828_dev *dev = fh->dev;
>>>> + struct au0828_dev *dev = vb2_get_drv_priv(vq);
>>>> + struct au0828_dmaqueue *vidq = &dev->vidq;
>>>> + unsigned long flags = 0;
>>>> + int i;
>>>>
>>>> - if (fh->resources & bit)
>>>> - /* have it already allocated */
>>>> - return 1;
>>>> + dprintk(1, "au0828_stop_streaming called %d\n", dev->streaming_users);
>>>>
>>>> - /* is it free? */
>>>> - if (dev->resources & bit) {
>>>> - /* no, someone else uses it */
>>>> - return 0;
>>>> + if (dev->streaming_users-- == 1)
>>>> + au0828_uninit_isoc(dev);
>>>> +
>>>> + spin_lock_irqsave(&dev->slock, flags);
>>>> + if (dev->isoc_ctl.buf != NULL) {
>>>> + vb2_buffer_done(&dev->isoc_ctl.buf->vb, VB2_BUF_STATE_ERROR);
>>>> + dev->isoc_ctl.buf = NULL;
>>>> }
>>>> - /* it's free, grab it */
>>>> - fh->resources |= bit;
>>>> - dev->resources |= bit;
>>>> - dprintk(1, "res: get %d\n", bit);
>>>> + while (!list_empty(&vidq->active)) {
>>>> + struct au0828_buffer *buf;
>>>>
>>>> - return 1;
>>>> -}
>>>> + buf = list_entry(vidq->active.next, struct au0828_buffer, list);
>>>> + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
>>>> + list_del(&buf->list);
>>>> + }
>>>>
>>>> -static int res_check(struct au0828_fh *fh, unsigned int bit)
>>>> -{
>>>> - return fh->resources & bit;
>>>> -}
>>>> + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
>>>>
>>>> -static int res_locked(struct au0828_dev *dev, unsigned int bit)
>>>> -{
>>>> - return dev->resources & bit;
>>>> + for (i = 0; i < AU0828_MAX_INPUT; i++) {
>>>> + if (AUVI_INPUT(i).audio_setup == NULL)
>>>> + continue;
>>>> + (AUVI_INPUT(i).audio_setup)(dev, 0);
>>>> + }
>>>> + spin_unlock_irqrestore(&dev->slock, flags);
>>>> +
>>>> + dev->vid_timeout_running = 0;
>>>> + del_timer_sync(&dev->vid_timeout);
>>>> }
>>>>
>>>> -static void res_free(struct au0828_fh *fh, unsigned int bits)
>>>> +void au0828_stop_vbi_streaming(struct vb2_queue *vq)
>>>> {
>>>> - struct au0828_dev *dev = fh->dev;
>>>> + struct au0828_dev *dev = vb2_get_drv_priv(vq);
>>>> + struct au0828_dmaqueue *vbiq = &dev->vbiq;
>>>> + unsigned long flags = 0;
>>>> +
>>>> + dprintk(1, "au0828_stop_vbi_streaming called %d\n",
>>>> + dev->streaming_users);
>>>> +
>>>> + if (dev->streaming_users-- == 1)
>>>> + au0828_uninit_isoc(dev);
>>>>
>>>> - BUG_ON((fh->resources & bits) != bits);
>>>> + spin_lock_irqsave(&dev->slock, flags);
>>>> + if (dev->isoc_ctl.vbi_buf != NULL) {
>>>> + vb2_buffer_done(&dev->isoc_ctl.vbi_buf->vb,
>>>> + VB2_BUF_STATE_ERROR);
>>>> + dev->isoc_ctl.vbi_buf = NULL;
>>>> + }
>>>> + while (!list_empty(&vbiq->active)) {
>>>> + struct au0828_buffer *buf;
>>>> +
>>>> + buf = list_entry(vbiq->active.next, struct au0828_buffer, list);
>>>> + list_del(&buf->list);
>>>> + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
>>>> + }
>>>> + spin_unlock_irqrestore(&dev->slock, flags);
>>>>
>>>> - fh->resources &= ~bits;
>>>> - dev->resources &= ~bits;
>>>> - dprintk(1, "res: put %d\n", bits);
>>>> + dev->vbi_timeout_running = 0;
>>>> + del_timer_sync(&dev->vbi_timeout);
>>>> }
>>>>
>>>> -static int get_ressource(struct au0828_fh *fh)
>>>> +static struct vb2_ops au0828_video_qops = {
>>>> + .queue_setup = queue_setup,
>>>> + .buf_prepare = buffer_prepare,
>>>> + .buf_queue = buffer_queue,
>>>> + .start_streaming = au0828_start_analog_streaming,
>>>> + .stop_streaming = au0828_stop_streaming,
>>>> + .wait_prepare = vb2_ops_wait_prepare,
>>>> + .wait_finish = vb2_ops_wait_finish,
>>>> +};
>>>> +
>>>> +/* ------------------------------------------------------------------
>>>> + V4L2 interface
>>>> + ------------------------------------------------------------------*/
>>>> +/*
>>>> + * au0828_analog_unregister
>>>> + * unregister v4l2 devices
>>>> + */
>>>> +void au0828_analog_unregister(struct au0828_dev *dev)
>>>> {
>>>> - switch (fh->type) {
>>>> - case V4L2_BUF_TYPE_VIDEO_CAPTURE:
>>>> - return AU0828_RESOURCE_VIDEO;
>>>> - case V4L2_BUF_TYPE_VBI_CAPTURE:
>>>> - return AU0828_RESOURCE_VBI;
>>>> - default:
>>>> - BUG();
>>>> - return 0;
>>>> - }
>>>> + dprintk(1, "au0828_analog_unregister called\n");
>>>> + mutex_lock(&au0828_sysfs_lock);
>>>> +
>>>> + if (dev->vdev)
>>>> + video_unregister_device(dev->vdev);
>>>> + if (dev->vbi_dev)
>>>> + video_unregister_device(dev->vbi_dev);
>>>> +
>>>> + mutex_unlock(&au0828_sysfs_lock);
>>>> }
>>>>
>>>> /* This function ensures that video frames continue to be delivered even if
>>>> @@ -950,8 +931,8 @@ static void au0828_vid_buffer_timeout(unsigned long data)
>>>>
>>>> buf = dev->isoc_ctl.buf;
>>>> if (buf != NULL) {
>>>> - vid_data = videobuf_to_vmalloc(&buf->vb);
>>>> - memset(vid_data, 0x00, buf->vb.size); /* Blank green frame */
>>>> + vid_data = vb2_plane_vaddr(&buf->vb, 0);
>>>> + memset(vid_data, 0x00, buf->length); /* Blank green frame */
>>>> buffer_filled(dev, dma_q, buf);
>>>> }
>>>> get_next_buf(dma_q, &buf);
>>>> @@ -974,8 +955,8 @@ static void au0828_vbi_buffer_timeout(unsigned long data)
>>>>
>>>> buf = dev->isoc_ctl.vbi_buf;
>>>> if (buf != NULL) {
>>>> - vbi_data = videobuf_to_vmalloc(&buf->vb);
>>>> - memset(vbi_data, 0x00, buf->vb.size);
>>>> + vbi_data = vb2_plane_vaddr(&buf->vb, 0);
>>>> + memset(vbi_data, 0x00, buf->length);
>>>> vbi_buffer_filled(dev, dma_q, buf);
>>>> }
>>>> vbi_get_next_buf(dma_q, &buf);
>>>> @@ -985,105 +966,65 @@ static void au0828_vbi_buffer_timeout(unsigned long data)
>>>> spin_unlock_irqrestore(&dev->slock, flags);
>>>> }
>>>>
>>>> -
>>>> static int au0828_v4l2_open(struct file *filp)
>>>> {
>>>> - int ret = 0;
>>>> - struct video_device *vdev = video_devdata(filp);
>>>> struct au0828_dev *dev = video_drvdata(filp);
>>>> - struct au0828_fh *fh;
>>>> - int type;
>>>> -
>>>> - switch (vdev->vfl_type) {
>>>> - case VFL_TYPE_GRABBER:
>>>> - type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
>>>> - break;
>>>> - case VFL_TYPE_VBI:
>>>> - type = V4L2_BUF_TYPE_VBI_CAPTURE;
>>>> - break;
>>>> - default:
>>>> - return -EINVAL;
>>>> - }
>>>> -
>>>> - fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL);
>>>> - if (NULL == fh) {
>>>> - dprintk(1, "Failed allocate au0828_fh struct!\n");
>>>> - return -ENOMEM;
>>>> - }
>>>> + int ret = 0;
>>>>
>>> No need to assign it to zero.
>>
>> Yes. Looks like there are a few other routines that zero out
>> ret. If you want to see all of those cleaned up, I can do a
>> separate patch cleaning all these instances. If not I can send
>> patch v4? Please let me know your preference.
>>
> No it needs to go in this patch itself for here.
No problem. I will send patch v4 for this patch with this change.
>
>>>
>>>> - fh->type = type;
>>>> - fh->dev = dev;
>>>> - v4l2_fh_init(&fh->fh, vdev);
>>>> - filp->private_data = fh;
>>>> + dprintk(1,
>>>> + "%s called std_set %d dev_state %d stream users %d users %d\n",
>>>> + __func__, dev->std_set_in_tuner_core, dev->dev_state,
>>>> + dev->streaming_users, dev->users);
>>>>
>>>> - if (mutex_lock_interruptible(&dev->lock)) {
>>>> - kfree(fh);
>>>> + if (mutex_lock_interruptible(&dev->lock))
>>>> return -ERESTARTSYS;
>>>> +
>>>> + ret = v4l2_fh_open(filp);
>>>> + if (ret) {
>>>> + au0828_isocdbg("%s: v4l2_fh_open() returned error %d\n",
>>>> + __func__, ret);
>>>> + mutex_unlock(&dev->lock);
>>>> + return ret;
>>>> }
>>>> +
>>>> if (dev->users == 0) {
>>>
>>> you can use v4l2_fh_is_singular_file() and get rid of users member ?
>>
>> Please see Devin's response on this. I have been debugging the change
>> I made to use v4l2_fh_is_singular_file() instead of users and seeing
>> problem with reset stream and couldn't really figure out why until
>> Devin explained it.
>>
> Agreed.
Thanks,
-- Shuah
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@xxxxxxxxxxxxxxx | (970) 217-8978
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/